ELECTRICAL CRAFT HELPER PRACTICE
ACTUAL EXAM PAPER 2026 QUESTIONS
WITH ANSWERS GRADED A+
• Which direction should most nuts be turned to take them off their bold or
screw.
Answer: A. Clockwise *B. Counterclockwise C. Either way, depending on
the number of threads per inch
• 40 divided by 2 2/3 is equal to.
Answer: A. 12 *B. 15 C. 18 D. 21
• The sum of 6'6, 5'9, and 2' 1 1/2 is.
Answer: 14'4 1/2
• To light the 300 watt lamp, the following switches must be closed.
Answer: X and Z
• Craft worker that is most likely to use tool number 26 is a.
Answer: Bricklayer
• That wrench that is used in a manner similar to a screwdriver is a/an.
Answer: Allen wrench
• If you have a ladder that has 12 rungs and the top of it rests against a
building, the base should be placed away from the building about.
Answer: A. 2 feet *B. 3 feet C. 4 feet D. 6 feet
• Horizontal beams with floors resting on them are properly called.
Answer: Joists
• In discussing a work problem with a supervisor of another unit, the most
effective way to secure info if the supervisor rambles is to.
Answer: Tell the supervisor to be specific so you can tell what the
supervisor wants
,• A close nipple is shown at number.
Answer: 16
• Usually, the most important point in the maintenance of pneumatic drills
and pavement breakers is.
Answer: Ample lubrication
• Part of a drill press used to hold the drills is called the.
Answer: Chuck
• The routine duties you are first assigned seem to you to be too simple . You
are sure that you could perform much more responsible work. Under these
circumstances you should.
Answer: Consider the performances of the duties assigned as an opportunity
to familiarize yourself with important work details
• The most effective way for an employee to establish a good working
relationship with co-workers is to.
Answer: A. Work to give the impression of agreement to avoid arguments
*B. Do the job in an efficient, friendly manner without making special
efforts to impress anyone C. Give co-workers suggestions which will be
helpful for their work D. Socialize with your colleagues away from work
• Which one these tools is best to use for gripping large or hard to get at
objects?.
Answer: A. 3 B. 10 C. 12 * D. 18
• In wood building contraction, pieces of lumber having large knots would be
least objectionable when used as.
Answer: Blocking
• You are assigned to work with a person with whom you cannot get along
with. You think that you have done everything that you can to get along
with the person but nothing has worked. The situation is such that it is very
hard for you to perform the duties assigned to you. The best thing for you to
do is to.
Answer: *A. Politely request a transfer B. Work with the person as well as
, you can, and talk the situation over with your supervisor C. Continue to
work with the person as well as you can and try harder to get along D.
Request that your supervisor transfer one of you as soon as possible
• When the driver of a vehicle comes to a flashing yellow signal at an
intersection the driver must.
Answer: Proceed cautiously
• In figure 14, if parts B and C were broken so that they could not move, bar
A could.
Answer: A. Move in the direction of arrow 1, only B. Move in the direction
of arrow 2, only C. Move either in the direction or arrow 1 or 2 *D. Not
move at all
• A pipe wrench is least likely to be used for loosening a pipe.
Answer: Tee
• The type of pliers likely to be most useful for general maintenance and
repair work, or only one type can be supplied.
Answer: A. Side cutting pliers *B. Slip-joint combination pliers C. Vice grip
pliers D. Water pump pliers
• If all the following steps are performed in replacing a broken window pane,
which one should best be done after the other three?.
Answer: B. Place the glass in the sash, making sure it does absolutely flat
• There are a # of measuring tools used. Tools for measuring the size of
articles manufactured by mass production methods are called gages. Some
of them are made for general use, may be adapted to measure a wide range
of sizes. Most gages are made for a definite meas. operations with close
limits. They are usually made of tool steel, hardened, and ground..
Answer: *A. Most gages are designed to check specific dimensions B.
Workers in mass production operations measure only with gages C. Mass
production would not be possible without standardization D. Although
gages are usually made of tool steel, other measuring devices are not
• In figure 12, when part A makes one full turn, how many turns does B
ACTUAL EXAM PAPER 2026 QUESTIONS
WITH ANSWERS GRADED A+
• Which direction should most nuts be turned to take them off their bold or
screw.
Answer: A. Clockwise *B. Counterclockwise C. Either way, depending on
the number of threads per inch
• 40 divided by 2 2/3 is equal to.
Answer: A. 12 *B. 15 C. 18 D. 21
• The sum of 6'6, 5'9, and 2' 1 1/2 is.
Answer: 14'4 1/2
• To light the 300 watt lamp, the following switches must be closed.
Answer: X and Z
• Craft worker that is most likely to use tool number 26 is a.
Answer: Bricklayer
• That wrench that is used in a manner similar to a screwdriver is a/an.
Answer: Allen wrench
• If you have a ladder that has 12 rungs and the top of it rests against a
building, the base should be placed away from the building about.
Answer: A. 2 feet *B. 3 feet C. 4 feet D. 6 feet
• Horizontal beams with floors resting on them are properly called.
Answer: Joists
• In discussing a work problem with a supervisor of another unit, the most
effective way to secure info if the supervisor rambles is to.
Answer: Tell the supervisor to be specific so you can tell what the
supervisor wants
,• A close nipple is shown at number.
Answer: 16
• Usually, the most important point in the maintenance of pneumatic drills
and pavement breakers is.
Answer: Ample lubrication
• Part of a drill press used to hold the drills is called the.
Answer: Chuck
• The routine duties you are first assigned seem to you to be too simple . You
are sure that you could perform much more responsible work. Under these
circumstances you should.
Answer: Consider the performances of the duties assigned as an opportunity
to familiarize yourself with important work details
• The most effective way for an employee to establish a good working
relationship with co-workers is to.
Answer: A. Work to give the impression of agreement to avoid arguments
*B. Do the job in an efficient, friendly manner without making special
efforts to impress anyone C. Give co-workers suggestions which will be
helpful for their work D. Socialize with your colleagues away from work
• Which one these tools is best to use for gripping large or hard to get at
objects?.
Answer: A. 3 B. 10 C. 12 * D. 18
• In wood building contraction, pieces of lumber having large knots would be
least objectionable when used as.
Answer: Blocking
• You are assigned to work with a person with whom you cannot get along
with. You think that you have done everything that you can to get along
with the person but nothing has worked. The situation is such that it is very
hard for you to perform the duties assigned to you. The best thing for you to
do is to.
Answer: *A. Politely request a transfer B. Work with the person as well as
, you can, and talk the situation over with your supervisor C. Continue to
work with the person as well as you can and try harder to get along D.
Request that your supervisor transfer one of you as soon as possible
• When the driver of a vehicle comes to a flashing yellow signal at an
intersection the driver must.
Answer: Proceed cautiously
• In figure 14, if parts B and C were broken so that they could not move, bar
A could.
Answer: A. Move in the direction of arrow 1, only B. Move in the direction
of arrow 2, only C. Move either in the direction or arrow 1 or 2 *D. Not
move at all
• A pipe wrench is least likely to be used for loosening a pipe.
Answer: Tee
• The type of pliers likely to be most useful for general maintenance and
repair work, or only one type can be supplied.
Answer: A. Side cutting pliers *B. Slip-joint combination pliers C. Vice grip
pliers D. Water pump pliers
• If all the following steps are performed in replacing a broken window pane,
which one should best be done after the other three?.
Answer: B. Place the glass in the sash, making sure it does absolutely flat
• There are a # of measuring tools used. Tools for measuring the size of
articles manufactured by mass production methods are called gages. Some
of them are made for general use, may be adapted to measure a wide range
of sizes. Most gages are made for a definite meas. operations with close
limits. They are usually made of tool steel, hardened, and ground..
Answer: *A. Most gages are designed to check specific dimensions B.
Workers in mass production operations measure only with gages C. Mass
production would not be possible without standardization D. Although
gages are usually made of tool steel, other measuring devices are not
• In figure 12, when part A makes one full turn, how many turns does B
