Alberta Gasfitter Class A Certification Exam
Practice Questions And Correct Answers
1. Which Of The Following Is The Primary Purpose Of A
Pressure Regulator In A Gas Piping System?
A) Increase Gas Pressure
B) Reduce Gas Pressure To A Safe Level
C) Measure Gas Flow
D) Filter Impurities
B) Reduce Gas Pressure To A Safe Level
The Regulator Ensures Appliances Receive Gas At A Safe, Consistent
Pressure, Preventing Overpressure Hazards.
2. What Is The Minimum Burial Depth For Polyethylene Gas Piping In
Alberta?
A) 300 Mm
B) 600 Mm
C) 750 Mm
D) 900 Mm
B) 600 Mm
Alberta Codes Require A Minimum Depth Of 600 Mm To Prevent
Damage From Surface Activities.
3. In Gas Appliance Installations, What Is The Primary Concern With
Venting Combustion Gases?
A) Energy Efficiency
B) Preventing Moisture Buildup
C) Removing Carbon Monoxide Safely
D) Reducing Noise
C) Removing Carbon Monoxide Safely
Proper Venting Prevents Dangerous Accumulation Of Carbon
, Monoxide, Which Is Toxic.
4. Which Type Of Gas Is Commonly Used In Residential Heating
In Alberta?
A) Butane
B) Propane
C) Natural Gas
D) Methane
C) Natural Gas
Natural Gas Is The Standard For Most Residential Heating In Alberta
Due To Its Availability And Safety.
5. What Does A Yellow-Colored Gas Pipe Indicate?
A) Water
B) Air
C) Gas
D) Steam
C) Gas
Yellow Is The Standard Color Code For Identifying Gas Piping.
6. What Is The Purpose Of A Drip Leg In Gas Piping?
A) Increase Gas Pressure
B) Trap Moisture And Debris
C) Measure Gas Flow
D) Reduce Noise
B) Trap Moisture And Debris
Drip Legs Prevent Dirt And Condensate From Entering Appliances And
Regulators.
7. How Often Must A Gas Appliance Be Inspected According To Alberta
Regulations?
A) Every Month
B) Every 6 Months
C) Annually
D) Only When Installed
, C) Annually
Regular Inspections Ensure Appliances Are Operating Safely And
Efficiently.
8. Which Material Is Not Approved For Use In Alberta Gas Piping?
A) Steel
B) Copper
C) Csst (Corrugated Stainless Steel Tubing)
D) Pvc
D) Pvc
Pvc Cannot Withstand Gas Pressures And Temperatures, Making It Unsafe
For Gas Piping.
9. What Is The Maximum Allowable Pressure For A Residential Natural
Gas System In Alberta?
A) 1 Psi
B) 5 Psi
C) 10 Psi
D) 15 Psi
A) 1 Psi
Residential Systems Typically Operate At Low Pressures For Safety.
10. When Performing A Gas Leak Test, Which Method
Is Recommended?
A) Smelling For Gas Only
B) Using A Soapy Water Solution
C) Using A Flame
D) Pressurizing With Air Only
B) Using A Soapy Water Solution
Soap Solution Bubbles At Leak Points, Providing A Safe Detection
Method Without Fire Risk.
11. What Is The Function Of A Gas Shutoff Valve?
A) Increase Gas Flow
Practice Questions And Correct Answers
1. Which Of The Following Is The Primary Purpose Of A
Pressure Regulator In A Gas Piping System?
A) Increase Gas Pressure
B) Reduce Gas Pressure To A Safe Level
C) Measure Gas Flow
D) Filter Impurities
B) Reduce Gas Pressure To A Safe Level
The Regulator Ensures Appliances Receive Gas At A Safe, Consistent
Pressure, Preventing Overpressure Hazards.
2. What Is The Minimum Burial Depth For Polyethylene Gas Piping In
Alberta?
A) 300 Mm
B) 600 Mm
C) 750 Mm
D) 900 Mm
B) 600 Mm
Alberta Codes Require A Minimum Depth Of 600 Mm To Prevent
Damage From Surface Activities.
3. In Gas Appliance Installations, What Is The Primary Concern With
Venting Combustion Gases?
A) Energy Efficiency
B) Preventing Moisture Buildup
C) Removing Carbon Monoxide Safely
D) Reducing Noise
C) Removing Carbon Monoxide Safely
Proper Venting Prevents Dangerous Accumulation Of Carbon
, Monoxide, Which Is Toxic.
4. Which Type Of Gas Is Commonly Used In Residential Heating
In Alberta?
A) Butane
B) Propane
C) Natural Gas
D) Methane
C) Natural Gas
Natural Gas Is The Standard For Most Residential Heating In Alberta
Due To Its Availability And Safety.
5. What Does A Yellow-Colored Gas Pipe Indicate?
A) Water
B) Air
C) Gas
D) Steam
C) Gas
Yellow Is The Standard Color Code For Identifying Gas Piping.
6. What Is The Purpose Of A Drip Leg In Gas Piping?
A) Increase Gas Pressure
B) Trap Moisture And Debris
C) Measure Gas Flow
D) Reduce Noise
B) Trap Moisture And Debris
Drip Legs Prevent Dirt And Condensate From Entering Appliances And
Regulators.
7. How Often Must A Gas Appliance Be Inspected According To Alberta
Regulations?
A) Every Month
B) Every 6 Months
C) Annually
D) Only When Installed
, C) Annually
Regular Inspections Ensure Appliances Are Operating Safely And
Efficiently.
8. Which Material Is Not Approved For Use In Alberta Gas Piping?
A) Steel
B) Copper
C) Csst (Corrugated Stainless Steel Tubing)
D) Pvc
D) Pvc
Pvc Cannot Withstand Gas Pressures And Temperatures, Making It Unsafe
For Gas Piping.
9. What Is The Maximum Allowable Pressure For A Residential Natural
Gas System In Alberta?
A) 1 Psi
B) 5 Psi
C) 10 Psi
D) 15 Psi
A) 1 Psi
Residential Systems Typically Operate At Low Pressures For Safety.
10. When Performing A Gas Leak Test, Which Method
Is Recommended?
A) Smelling For Gas Only
B) Using A Soapy Water Solution
C) Using A Flame
D) Pressurizing With Air Only
B) Using A Soapy Water Solution
Soap Solution Bubbles At Leak Points, Providing A Safe Detection
Method Without Fire Risk.
11. What Is The Function Of A Gas Shutoff Valve?
A) Increase Gas Flow
