PrepIQ Florida FL Standard Modular Inspector
Ultimate Exam
Question 1. **Which Florida statute specifically governs the construction and installation of
manufactured buildings, including modular units?**
A) Chapter 553, Part I, Florida Statutes
B) Chapter 553, Part II, Florida Statutes
C) Chapter 601, Part I, Florida Statutes
D) Chapter 601, Part II, Florida Statutes
Answer: A
Explanation: Chapter 553, Part I, known as the Manufactured Buildings Act, sets the legal framework for
manufactured and modular building construction in Florida.
---
Question 2. **In the Florida Administrative Code, which rule chapter contains the Building Code for the
Installation of Manufactured Buildings (BCAIB) regulations?**
A) Rule Chapter 9B‑1
B) Rule Chapter 61G19
C) Rule Chapter 61G17
D) Rule Chapter 9B‑2
Answer: B
Explanation: Rule Chapter 61G19 of the Florida Administrative Code implements the BCAIB regulations
governing manufactured building installations.
---
Question 3. **Who holds the primary authority to approve modular building plans in Florida before local
permitting?**
A) Local building official
B) State fire marshal
, PrepIQ Florida FL Standard Modular Inspector
Ultimate Exam
C) Modular Plans Examiner
D) County health department
Answer: C
Explanation: The Modular Plans Examiner, appointed by the state, reviews and approves modular plans
before they are submitted to local officials for site‑specific permits.
---
Question 4. **What is the purpose of the “Insignia of Approval” on a modular unit?**
A) To indicate the unit meets local fire code only
B) To certify that the unit has passed state plan review and conforms to code
C) To show the manufacturer’s warranty period
D) To display the unit’s energy efficiency rating
Answer: B
Explanation: The Insignia of Approval confirms that the modular unit has been reviewed and approved
by the state examiner and complies with applicable codes.
---
Question 5. **Which document must be verified to confirm that a third‑party agency (TPA) has
approved a modular building design?**
A) Manufacturer’s warranty card
B) TPA certification letter
C) Local zoning permit
D) Energy Gauge form
Answer: B
Explanation: A TPA certification letter provides evidence that an independent agency has reviewed and
approved the design per state requirements.
, PrepIQ Florida FL Standard Modular Inspector
Ultimate Exam
---
Question 6. **When reviewing a modular plan, the examiner must ensure that technical records are
retained for how many years after project completion?**
A) 1 year
B) 3 years
C) 5 years
D) 10 years
Answer: C
Explanation: Florida regulations require the maintenance of technical records and project files for at
least five years after the project is completed.
---
Question 7. **Which occupancy classification would a modular senior‑living facility most likely fall
under?**
A) Group R‑2 (Residential)
B) Group B (Business)
C) Group I‑2 (Institutional)
D) Group M (Mercantile)
Answer: C
Explanation: Senior‑living facilities that provide personal care and health services are classified as
Group I‑2 (Institutional) occupancies.
---
Question 8. **What is the maximum allowable height for a modular building in a High‑Velocity
Hurricane Zone (HVHZ) without additional structural reinforcement?**
A) 30 feet
, PrepIQ Florida FL Standard Modular Inspector
Ultimate Exam
B) 40 feet
C) 50 feet
D) 60 feet
Answer: B
Explanation: In HVHZ, the Florida Building Code limits modular building height to 40 ft unless engineered
reinforcement is provided.
---
Question 9. **Which calculation determines the allowable floor area for a modular configuration based
on occupancy load?**
A) Floor‑area ratio (FAR)
B) Occupant load factor (OLF)
C) Net square footage (NSF)
D) Gross floor area (GFA)
Answer: B
Explanation: The occupant load factor, defined in the code, is used to calculate permissible floor area for
a given occupancy classification.
---
Question 10. **When two different occupancy types are combined in a modular assembly, what
separation is required by code?**
A) A 6‑inch fire‑resistive seal
B) A 12‑inch vertical fire barrier
C) A fire‑rated wall assembly with a minimum rating of 1‑hour
D) No separation is required if the combined load is under 10 psf
Answer: C
Ultimate Exam
Question 1. **Which Florida statute specifically governs the construction and installation of
manufactured buildings, including modular units?**
A) Chapter 553, Part I, Florida Statutes
B) Chapter 553, Part II, Florida Statutes
C) Chapter 601, Part I, Florida Statutes
D) Chapter 601, Part II, Florida Statutes
Answer: A
Explanation: Chapter 553, Part I, known as the Manufactured Buildings Act, sets the legal framework for
manufactured and modular building construction in Florida.
---
Question 2. **In the Florida Administrative Code, which rule chapter contains the Building Code for the
Installation of Manufactured Buildings (BCAIB) regulations?**
A) Rule Chapter 9B‑1
B) Rule Chapter 61G19
C) Rule Chapter 61G17
D) Rule Chapter 9B‑2
Answer: B
Explanation: Rule Chapter 61G19 of the Florida Administrative Code implements the BCAIB regulations
governing manufactured building installations.
---
Question 3. **Who holds the primary authority to approve modular building plans in Florida before local
permitting?**
A) Local building official
B) State fire marshal
, PrepIQ Florida FL Standard Modular Inspector
Ultimate Exam
C) Modular Plans Examiner
D) County health department
Answer: C
Explanation: The Modular Plans Examiner, appointed by the state, reviews and approves modular plans
before they are submitted to local officials for site‑specific permits.
---
Question 4. **What is the purpose of the “Insignia of Approval” on a modular unit?**
A) To indicate the unit meets local fire code only
B) To certify that the unit has passed state plan review and conforms to code
C) To show the manufacturer’s warranty period
D) To display the unit’s energy efficiency rating
Answer: B
Explanation: The Insignia of Approval confirms that the modular unit has been reviewed and approved
by the state examiner and complies with applicable codes.
---
Question 5. **Which document must be verified to confirm that a third‑party agency (TPA) has
approved a modular building design?**
A) Manufacturer’s warranty card
B) TPA certification letter
C) Local zoning permit
D) Energy Gauge form
Answer: B
Explanation: A TPA certification letter provides evidence that an independent agency has reviewed and
approved the design per state requirements.
, PrepIQ Florida FL Standard Modular Inspector
Ultimate Exam
---
Question 6. **When reviewing a modular plan, the examiner must ensure that technical records are
retained for how many years after project completion?**
A) 1 year
B) 3 years
C) 5 years
D) 10 years
Answer: C
Explanation: Florida regulations require the maintenance of technical records and project files for at
least five years after the project is completed.
---
Question 7. **Which occupancy classification would a modular senior‑living facility most likely fall
under?**
A) Group R‑2 (Residential)
B) Group B (Business)
C) Group I‑2 (Institutional)
D) Group M (Mercantile)
Answer: C
Explanation: Senior‑living facilities that provide personal care and health services are classified as
Group I‑2 (Institutional) occupancies.
---
Question 8. **What is the maximum allowable height for a modular building in a High‑Velocity
Hurricane Zone (HVHZ) without additional structural reinforcement?**
A) 30 feet
, PrepIQ Florida FL Standard Modular Inspector
Ultimate Exam
B) 40 feet
C) 50 feet
D) 60 feet
Answer: B
Explanation: In HVHZ, the Florida Building Code limits modular building height to 40 ft unless engineered
reinforcement is provided.
---
Question 9. **Which calculation determines the allowable floor area for a modular configuration based
on occupancy load?**
A) Floor‑area ratio (FAR)
B) Occupant load factor (OLF)
C) Net square footage (NSF)
D) Gross floor area (GFA)
Answer: B
Explanation: The occupant load factor, defined in the code, is used to calculate permissible floor area for
a given occupancy classification.
---
Question 10. **When two different occupancy types are combined in a modular assembly, what
separation is required by code?**
A) A 6‑inch fire‑resistive seal
B) A 12‑inch vertical fire barrier
C) A fire‑rated wall assembly with a minimum rating of 1‑hour
D) No separation is required if the combined load is under 10 psf
Answer: C
