CSX Freight Conductor Final Exam Test Questions with
Answers Rated A
What hand signal is raised and lowered you find the clearance point? 2 Answers -
vertically? - ANSWER -Proceed ANSWER -1) Standing outside the rail and
off the end of crosstie extend arm toward the
equipment
What form is required to move a key train to 2) Identify the location equipment can no longer
show the hazmat position in a track? - be touched and position equipment an additional
ANSWER -CT-168 50 ft into track from location identified
True or False: When handling one or more Multiple Part True or False:
clearance implicated shipments in a train, do not After operating a switch or derail the employee
enter a yard or terminal where a yardmaster is must make certain the
on-duty until the yardmaster is informed of the 1) Device has a reflective handle
shipment. - ANSWER -True 2) Device is lined opposite movement
3) Lever is latched
4) If equipped, device is locked before being left
What instructions are required to handle and unattended - ANSWER -1) False
move a clearance implicated shipment? - 2) False
ANSWER -Clearance Bureau Instructions 3) True
4) True
Your train is traveling at a speed of 42 miles per
hour with a speed limit of 40 mph. This means When shoving equipment you must stop 150 ft
you are speeding by 2 mph. what do you do? - before what? Select All That Apply -
ANSWER -Tell the locomotive operator to ANSWER -1) A Fixed Derail
slow down 2) An improperly lined switch
Your train is traveling at a speed of 47 MPH with You are operating on the q79510 at max speed in
a speed limit of 40. This means you are speeding CP territory and you experience an air brake
emergency what is required when permitted to
by 7 MPH. what do you do? - ANSWER -
Tell the locomotive operator to stop proceed? - ANSWER -Operate the Train
not to exceed 20 MPH for 1 train length
Your equipment must not foul a track until it can
be visually determined that: 2 Answers - You have been switching and doubled your train,
how do you protect the movement when
ANSWER -1) The intended route is clear
2) Switches and derails connected with the shoving? - ANSWER -Protected by qualified
movement are properly lined employee on the leading end of the track, on the
ground ahead of the movement and clear of all
tracks
The yardmaster tasked you with putting cars
from track 11 into track 4. Track 4 does not have
a clearance marker clearly visible. How would Who is responsible for protecting a shove move?
, CSX Freight Conductor Final Exam Test Questions with
Answers Rated A
- ANSWER -Qualified Employee ensure? Select all that apply - ANSWER -1)
Couplers are in line
2) At least 1 knuckle is open
After coupling cars to your locomotive what is
your next step? - ANSWER -Stretch the
slack What must be conducted before beginning any
work activity? - ANSWER -Job Briefing
When shoving or pushing where must the train
be protected - ANSWER -From the leading When crossing tracks what must the employee
end visually do? 2 answers - ANSWER -1) Stop and
look both directions
2) ensure they are at least 25 ft from standing
What speed must not be exceeded when not equipment
moving to or from a main track operating a hand
operated switch - ANSWER -10 MPH
True or False: Employees that have been trained
and qualified may mount and dismount moving
Unless otherwise specified, authorized train equipment at a walking pace not to exceed 4
speeds: - ANSWER -Apply to entire train MPH except in case of emergency. -
ANSWER -True
Which of the following statements is true about
authorized train speeds? - ANSWER -Must What is the minimum distance you can stand
Not Be Exceeded away from a switch associated with a movement?
- ANSWER -30 Ft
You are leaving the main track, utilizing a hand
operated switch, into a non signaled siding what You are operating on the main track and are
is your max speed? - ANSWER -15 MPH approaching a 10 MPH speed restriction, when
should you notify your locomotive operator? -
ANSWER -Not more than 5 miles from the
You are using a non signaled siding what is the restriction and not less than 2 miles from the
speed you must follow - ANSWER -Must be restriction
able to stop in 1/2 the range of vision not
exceeding 25 MPH
How far from an electric locked switch must a
train be to operate the switch? - ANSWER -
When there is a conflict of your authorized speed Within 100 ft
what speed are you governed by? -
ANSWER -The Lowest
What must you do if track length is insufficient to
leave equipment clear of connecting tracks? -
Before coupling to equipment, what must you ANSWER -Completely occupy switch
Answers Rated A
What hand signal is raised and lowered you find the clearance point? 2 Answers -
vertically? - ANSWER -Proceed ANSWER -1) Standing outside the rail and
off the end of crosstie extend arm toward the
equipment
What form is required to move a key train to 2) Identify the location equipment can no longer
show the hazmat position in a track? - be touched and position equipment an additional
ANSWER -CT-168 50 ft into track from location identified
True or False: When handling one or more Multiple Part True or False:
clearance implicated shipments in a train, do not After operating a switch or derail the employee
enter a yard or terminal where a yardmaster is must make certain the
on-duty until the yardmaster is informed of the 1) Device has a reflective handle
shipment. - ANSWER -True 2) Device is lined opposite movement
3) Lever is latched
4) If equipped, device is locked before being left
What instructions are required to handle and unattended - ANSWER -1) False
move a clearance implicated shipment? - 2) False
ANSWER -Clearance Bureau Instructions 3) True
4) True
Your train is traveling at a speed of 42 miles per
hour with a speed limit of 40 mph. This means When shoving equipment you must stop 150 ft
you are speeding by 2 mph. what do you do? - before what? Select All That Apply -
ANSWER -Tell the locomotive operator to ANSWER -1) A Fixed Derail
slow down 2) An improperly lined switch
Your train is traveling at a speed of 47 MPH with You are operating on the q79510 at max speed in
a speed limit of 40. This means you are speeding CP territory and you experience an air brake
emergency what is required when permitted to
by 7 MPH. what do you do? - ANSWER -
Tell the locomotive operator to stop proceed? - ANSWER -Operate the Train
not to exceed 20 MPH for 1 train length
Your equipment must not foul a track until it can
be visually determined that: 2 Answers - You have been switching and doubled your train,
how do you protect the movement when
ANSWER -1) The intended route is clear
2) Switches and derails connected with the shoving? - ANSWER -Protected by qualified
movement are properly lined employee on the leading end of the track, on the
ground ahead of the movement and clear of all
tracks
The yardmaster tasked you with putting cars
from track 11 into track 4. Track 4 does not have
a clearance marker clearly visible. How would Who is responsible for protecting a shove move?
, CSX Freight Conductor Final Exam Test Questions with
Answers Rated A
- ANSWER -Qualified Employee ensure? Select all that apply - ANSWER -1)
Couplers are in line
2) At least 1 knuckle is open
After coupling cars to your locomotive what is
your next step? - ANSWER -Stretch the
slack What must be conducted before beginning any
work activity? - ANSWER -Job Briefing
When shoving or pushing where must the train
be protected - ANSWER -From the leading When crossing tracks what must the employee
end visually do? 2 answers - ANSWER -1) Stop and
look both directions
2) ensure they are at least 25 ft from standing
What speed must not be exceeded when not equipment
moving to or from a main track operating a hand
operated switch - ANSWER -10 MPH
True or False: Employees that have been trained
and qualified may mount and dismount moving
Unless otherwise specified, authorized train equipment at a walking pace not to exceed 4
speeds: - ANSWER -Apply to entire train MPH except in case of emergency. -
ANSWER -True
Which of the following statements is true about
authorized train speeds? - ANSWER -Must What is the minimum distance you can stand
Not Be Exceeded away from a switch associated with a movement?
- ANSWER -30 Ft
You are leaving the main track, utilizing a hand
operated switch, into a non signaled siding what You are operating on the main track and are
is your max speed? - ANSWER -15 MPH approaching a 10 MPH speed restriction, when
should you notify your locomotive operator? -
ANSWER -Not more than 5 miles from the
You are using a non signaled siding what is the restriction and not less than 2 miles from the
speed you must follow - ANSWER -Must be restriction
able to stop in 1/2 the range of vision not
exceeding 25 MPH
How far from an electric locked switch must a
train be to operate the switch? - ANSWER -
When there is a conflict of your authorized speed Within 100 ft
what speed are you governed by? -
ANSWER -The Lowest
What must you do if track length is insufficient to
leave equipment clear of connecting tracks? -
Before coupling to equipment, what must you ANSWER -Completely occupy switch
