Fundamentals of Engineering (FE) Exam Newest
2025 – 2026 Questions From Actual Exams
Complete 100 Questions And Correct Detailed
Answers (Verified Answers) |Already Graded
A+||Brand New!!
Content Covered (Most Tested Topics): Mathematics,
Engineering Probability & Statistics, Statics, Dynamics,
Mechanics of Materials, Thermodynamics, Fluid Mechanics,
Electrical Circuits, Engineering Economics, Ethics and
Professional Practice, Materials Science, Engineering
Mathematics
1. The derivative of f(x) = 3x² + 4x − 5 is:
A. 6x + 4
B. 6x − 4
C. 3x + 4
D. 3x² + 4
Answer: 6x + 4
The derivative of 3x² is 6x and the derivative of 4x is 4, while constants
differentiate to zero.
2. Evaluate the integral ∫2x dx.
A. x² + C
B. 2x + C
C. x²
D. 2x² + C
,Answer: x² + C
The integral of 2x is x² plus a constant of integration.
3. A force of 10 N acts on a body and causes an acceleration of 2
m/s². The mass of the body is:
A. 2 kg
B. 5 kg
C. 10 kg
D. 20 kg
Answer: 5 kg
Using Newton’s second law F = ma, mass equals force divided by
acceleration: 10/2 = 5 kg.
4. The unit of pressure in the SI system is:
A. Newton
B. Pascal
C. Joule
D. Watt
Answer: Pascal
Pressure is force per unit area, measured in Pascals (N/m²).
5. If a beam is simply supported and a load acts at the center, the
maximum bending moment occurs:
A. At the support
B. At the center
C. At quarter span
D. At the end
,Answer: At the center
For a simply supported beam with central load, bending moment is
greatest at midspan.
6. The probability of getting heads when flipping a fair coin is:
A. 0.25
B. 0.5
C. 0.75
D. 1
Answer: 0.5
A fair coin has two equally likely outcomes.
7. Hooke’s law states that stress is proportional to:
A. strain
B. load
C. displacement
D. energy
Answer: strain
Within the elastic limit, stress is directly proportional to strain.
8. The SI unit of electrical resistance is:
A. Volt
B. Ohm
C. Ampere
D. Coulomb
Answer: Ohm
Resistance is measured in ohms according to Ohm’s law.
, 9. The efficiency of a machine is defined as:
A. output/input
B. input/output
C. energy/loss
D. work/time
Answer: output/input
Efficiency equals useful output divided by total input.
10. The first law of thermodynamics states:
A. energy cannot be created or destroyed
B. entropy always increases
C. heat flows from cold to hot
D. temperature is constant
Answer: energy cannot be created or destroyed
This law describes conservation of energy.
11. The centroid of a uniform rectangular plate lies:
A. at the corner
B. at the midpoint
C. at the edge
D. outside the plate
Answer: at the midpoint
Symmetry places the centroid at the geometric center.
12. The SI unit of power is:
A. Joule
B. Watt
2025 – 2026 Questions From Actual Exams
Complete 100 Questions And Correct Detailed
Answers (Verified Answers) |Already Graded
A+||Brand New!!
Content Covered (Most Tested Topics): Mathematics,
Engineering Probability & Statistics, Statics, Dynamics,
Mechanics of Materials, Thermodynamics, Fluid Mechanics,
Electrical Circuits, Engineering Economics, Ethics and
Professional Practice, Materials Science, Engineering
Mathematics
1. The derivative of f(x) = 3x² + 4x − 5 is:
A. 6x + 4
B. 6x − 4
C. 3x + 4
D. 3x² + 4
Answer: 6x + 4
The derivative of 3x² is 6x and the derivative of 4x is 4, while constants
differentiate to zero.
2. Evaluate the integral ∫2x dx.
A. x² + C
B. 2x + C
C. x²
D. 2x² + C
,Answer: x² + C
The integral of 2x is x² plus a constant of integration.
3. A force of 10 N acts on a body and causes an acceleration of 2
m/s². The mass of the body is:
A. 2 kg
B. 5 kg
C. 10 kg
D. 20 kg
Answer: 5 kg
Using Newton’s second law F = ma, mass equals force divided by
acceleration: 10/2 = 5 kg.
4. The unit of pressure in the SI system is:
A. Newton
B. Pascal
C. Joule
D. Watt
Answer: Pascal
Pressure is force per unit area, measured in Pascals (N/m²).
5. If a beam is simply supported and a load acts at the center, the
maximum bending moment occurs:
A. At the support
B. At the center
C. At quarter span
D. At the end
,Answer: At the center
For a simply supported beam with central load, bending moment is
greatest at midspan.
6. The probability of getting heads when flipping a fair coin is:
A. 0.25
B. 0.5
C. 0.75
D. 1
Answer: 0.5
A fair coin has two equally likely outcomes.
7. Hooke’s law states that stress is proportional to:
A. strain
B. load
C. displacement
D. energy
Answer: strain
Within the elastic limit, stress is directly proportional to strain.
8. The SI unit of electrical resistance is:
A. Volt
B. Ohm
C. Ampere
D. Coulomb
Answer: Ohm
Resistance is measured in ohms according to Ohm’s law.
, 9. The efficiency of a machine is defined as:
A. output/input
B. input/output
C. energy/loss
D. work/time
Answer: output/input
Efficiency equals useful output divided by total input.
10. The first law of thermodynamics states:
A. energy cannot be created or destroyed
B. entropy always increases
C. heat flows from cold to hot
D. temperature is constant
Answer: energy cannot be created or destroyed
This law describes conservation of energy.
11. The centroid of a uniform rectangular plate lies:
A. at the corner
B. at the midpoint
C. at the edge
D. outside the plate
Answer: at the midpoint
Symmetry places the centroid at the geometric center.
12. The SI unit of power is:
A. Joule
B. Watt
