South Carolina Millwright Certification
License Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. A millwright is installing a new pump and must align it with a motor.
Which tool provides the most precise measurement for shaft
alignment?
A. Spirit level
B. Feeler gauge
C. Dial indicator
D. Ammeter
The dial indicator measures minute variations in shaft position,
making it the most precise tool for shaft alignment.
2. When lifting a heavy machine with a chain fall, what is the PRIMARY
safety concern?
A. Centering the load
B. Inspecting the chain fall capacity
C. Ensuring the load is balanced and secure
D. Lubricating the chain
Balancing and securing the load prevents unexpected shifting or
tipping, which is critical when lifting heavy machinery.
3. Which welding process is most commonly used by millwrights for
general fabrication and repair?
A. Oxy-fuel welding
B. Shielded Metal Arc Welding (SMAW)
, C. Gas Metal Arc Welding (GMAW)
D. Resistance welding
SMAW is widely used in fieldwork due to its versatility and
portability, making it common for millwright applications.
4. A millwright needs to cut a steel plate 1 inch thick. Which tool is most
appropriate?
A. Cold chisel
B. Oxy-acetylene torch
C. Band saw
D. Circular saw
An oxy-acetylene torch is capable of cutting thick steel efficiently on
the job site.
5. When reading a blueprint, what does the term “tolerance” refer to?
A. Material grade
B. Allowable variation in dimensions
C. Welding specification
D. Load capacity
Tolerance defines the acceptable range of dimensional variation in
fabricated parts.
6. A keyway is typically cut into a shaft to accommodate:
A. Bolts
B. Bearings
C. Keys for transmitting torque
D. Grease fittings
A keyway allows a key to be inserted, providing a secure connection
that transmits torque between the shaft and attached components.
7. Which type of fit allows for the tightest tolerance, often requiring
force or heat for assembly?
A. Clearance fit
B. Interference fit
C. Transition fit
D. Loose fit
Interference fits are designed so parts slightly overlap, requiring
force or thermal methods to assemble.
, 8. The primary purpose of a shim in machinery installation is to:
A. Lubricate surfaces
B. Adjust alignment or level
C. Electrically ground equipment
D. Act as a fastener
Shims are thin pieces used to fine-tune alignment or level between
components.
9. When lifting materials with a crane, the term “tagline” refers to:
A. The rated capacity
B. A rope used to control load movement
C. A safety certification
D. The hook latch
Taglines help operators control swing and rotation of the load during
lifting operations.
10. In vibration analysis, what frequency component is associated
with unbalance?
A. Bearing defect frequency
B. Running speed (1x RPM)
C. Gear mesh frequency
D. Electrical noise
Unbalance typically shows vibration at the running speed of the
machine, known as 1x RPM.
11. Which OSHA standard primarily governs lockout/tagout
procedures?
A. 1910.147
B. 1926.501
C. 1910.147(a)(1)(ii)
D. 1910.120
OSHA 1910.147 is the standard for controlling hazardous energy and
lockout/tagout.
12. A tachometer is used to measure:
A. Torque
B. Rotational speed
C. Force
D. Temperature
License Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. A millwright is installing a new pump and must align it with a motor.
Which tool provides the most precise measurement for shaft
alignment?
A. Spirit level
B. Feeler gauge
C. Dial indicator
D. Ammeter
The dial indicator measures minute variations in shaft position,
making it the most precise tool for shaft alignment.
2. When lifting a heavy machine with a chain fall, what is the PRIMARY
safety concern?
A. Centering the load
B. Inspecting the chain fall capacity
C. Ensuring the load is balanced and secure
D. Lubricating the chain
Balancing and securing the load prevents unexpected shifting or
tipping, which is critical when lifting heavy machinery.
3. Which welding process is most commonly used by millwrights for
general fabrication and repair?
A. Oxy-fuel welding
B. Shielded Metal Arc Welding (SMAW)
, C. Gas Metal Arc Welding (GMAW)
D. Resistance welding
SMAW is widely used in fieldwork due to its versatility and
portability, making it common for millwright applications.
4. A millwright needs to cut a steel plate 1 inch thick. Which tool is most
appropriate?
A. Cold chisel
B. Oxy-acetylene torch
C. Band saw
D. Circular saw
An oxy-acetylene torch is capable of cutting thick steel efficiently on
the job site.
5. When reading a blueprint, what does the term “tolerance” refer to?
A. Material grade
B. Allowable variation in dimensions
C. Welding specification
D. Load capacity
Tolerance defines the acceptable range of dimensional variation in
fabricated parts.
6. A keyway is typically cut into a shaft to accommodate:
A. Bolts
B. Bearings
C. Keys for transmitting torque
D. Grease fittings
A keyway allows a key to be inserted, providing a secure connection
that transmits torque between the shaft and attached components.
7. Which type of fit allows for the tightest tolerance, often requiring
force or heat for assembly?
A. Clearance fit
B. Interference fit
C. Transition fit
D. Loose fit
Interference fits are designed so parts slightly overlap, requiring
force or thermal methods to assemble.
, 8. The primary purpose of a shim in machinery installation is to:
A. Lubricate surfaces
B. Adjust alignment or level
C. Electrically ground equipment
D. Act as a fastener
Shims are thin pieces used to fine-tune alignment or level between
components.
9. When lifting materials with a crane, the term “tagline” refers to:
A. The rated capacity
B. A rope used to control load movement
C. A safety certification
D. The hook latch
Taglines help operators control swing and rotation of the load during
lifting operations.
10. In vibration analysis, what frequency component is associated
with unbalance?
A. Bearing defect frequency
B. Running speed (1x RPM)
C. Gear mesh frequency
D. Electrical noise
Unbalance typically shows vibration at the running speed of the
machine, known as 1x RPM.
11. Which OSHA standard primarily governs lockout/tagout
procedures?
A. 1910.147
B. 1926.501
C. 1910.147(a)(1)(ii)
D. 1910.120
OSHA 1910.147 is the standard for controlling hazardous energy and
lockout/tagout.
12. A tachometer is used to measure:
A. Torque
B. Rotational speed
C. Force
D. Temperature
