MAE 1351 Exam 1 (2026) 100%VERIFIED |
QUESTIONS AND ANSWERS | GRADED A+
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Small, thin protrusions that connect two or more thicker regions on a part
Choose an answer
The engineering design process
follows the same steps as the
1 2 Webs
scientific discovery process, or
scientific method. True?
To clock a hexagonal feature so
3 Profile 4 that it rests horizontally on one
side, I would...
Don't know?
Terms in this set (73)
, The engineering design process No; there are major differences
follows the same steps as the
scientific discovery process, or
scientific method. True?
The term "IPS" in SolidWorks refers measurement units
to...
To create an extrusion, I must first Yes, but the surface must be flat
draw a sketch on a surface. True?
What are the fundamental types of Geometrical and dimensional
sketch constraints?
To clock a hexagonal feature so Apply a horizontal constraint
that it rests horizontally on one
side, I would...
To create a revolved feature, the Coplanar
profile and the axis of the
revolution must be what?
To create a solid of revolution, I D) Any of the above will work
must...
A) Select a plain line from the
sketch to use as an axis
B) Make an axis in the sketch using a
construction line
C) Use reference geometry to make
an axis
D) Any of the above will work
I have a distance in my sketch It is a dimension driven by a parametric formula
preceded by a "sigma" symbol. This
means...
QUESTIONS AND ANSWERS | GRADED A+
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Small, thin protrusions that connect two or more thicker regions on a part
Choose an answer
The engineering design process
follows the same steps as the
1 2 Webs
scientific discovery process, or
scientific method. True?
To clock a hexagonal feature so
3 Profile 4 that it rests horizontally on one
side, I would...
Don't know?
Terms in this set (73)
, The engineering design process No; there are major differences
follows the same steps as the
scientific discovery process, or
scientific method. True?
The term "IPS" in SolidWorks refers measurement units
to...
To create an extrusion, I must first Yes, but the surface must be flat
draw a sketch on a surface. True?
What are the fundamental types of Geometrical and dimensional
sketch constraints?
To clock a hexagonal feature so Apply a horizontal constraint
that it rests horizontally on one
side, I would...
To create a revolved feature, the Coplanar
profile and the axis of the
revolution must be what?
To create a solid of revolution, I D) Any of the above will work
must...
A) Select a plain line from the
sketch to use as an axis
B) Make an axis in the sketch using a
construction line
C) Use reference geometry to make
an axis
D) Any of the above will work
I have a distance in my sketch It is a dimension driven by a parametric formula
preceded by a "sigma" symbol. This
means...
