PUMP OPERATOR STATE TEST COMPREHENSIVE STUDY
GUIDE 2026 FULL QUESTIONS AND SOLUTIONS GRADED
A+
● Pumpers with elevated water devices range from lengths of ___.. Answer: 50' to 75'
● Inverters re generally capable of providing ___ watts.. Answer: 1500
● Portable generators have a maximum of ___ watts.. Answer: 5000
● Vehicle mounted generators on a pumper have a maximum of ___ watts.. Answer:
12000
● Vehicle mounted generators on a rescue have a maximum of ___ watts.. Answer:
50000
● During the first six months after an apparatus is received, while the paint and
protective coating are new and unseasoned, the vehicle should be washed frequently
with ___ water to harden the paint and keep it from spotting.. Answer: cold
● Steering wheel play should be now more than ___ degrees in either direction..
Answer: 10
● During a brake test, the vehicle should come to a complete stop from a speed of 20
mph within ___ feet.. Answer: 35
● Air pressure should build to a sufficient level to allow vehicle operations within ___
seconds of starting.. Answer: 60
● Air pressure protection valves prevent air horns from being operated when the
pressure in the air reservoir drops below ___ PSI.. Answer: 80
● A significant portion of fire apparatus collisions occur while the apparatus is being
driven in ___.. Answer: reverse
● Responding units should travel at least ___ feet apart.. Answer: 300-500
● According to the inside/outside method of positioning a fire apparatus, for a building
5 stories or less, the pumper parks ___ of the ladder truck.. Answer: inside
, ● According to the inside/outside method of positioning a fire apparatus, for a building
5 stories or more, the pumper parks ___ of the ladder truck.. Answer: outside
● Intake hose sections are commonly ___ feet in length.. Answer: 10-50
● The front wheels of the apparatus should be at least a ___-degree angle when
positioning at a hydrant.. Answer: 45
● Park wildland apparatus ___ to avoid blocking other fire apparatus or evacuating
vehicles.. Answer: off the roadway
● It is best to park command vehicles on ___ of the fire building. This giver a view of
two sides of the building.. Answer: corners
● 1 PSI will raise a column of water ___ feet.. Answer: 2.304
● ___ is the part of the total pressure lost while forcing water through pipes, fittings,
fire hose, and adapters.. Answer: Friction loss
● PTO units limit the capacity of the pump to about ___ GPM. Answer: 500
● The most common pump position on today's engines is ___ pump.. Answer: midship
mounted
● A disadvantage of the rear-mount pump is the exposure to ___ for the
driver/operator.. Answer: traffic
● The pump and pump piping must withstand a hydrostatic test of ___ PSI before
being placed in service.. Answer: 500
● Apparatus' with tanks that are 1000 gallons or larger must have at least a ___-inch
tank-to-fill line.. Answer: 2
● The most common type of valve on pump intake and discharges is a ___ valve..
Answer: ball-type
● When drafting, there should be a minimum of ___ inches of water around the
strainer.. Answer: 24
● A general rule of thumb is that one 1000 GPM rated pumper should supply the FDC
for every ___ sprinkler heads that are flowing.. Answer: 50
● ___ are one-way valves in the FDC that prevent back flow.. Answer: Check valves
GUIDE 2026 FULL QUESTIONS AND SOLUTIONS GRADED
A+
● Pumpers with elevated water devices range from lengths of ___.. Answer: 50' to 75'
● Inverters re generally capable of providing ___ watts.. Answer: 1500
● Portable generators have a maximum of ___ watts.. Answer: 5000
● Vehicle mounted generators on a pumper have a maximum of ___ watts.. Answer:
12000
● Vehicle mounted generators on a rescue have a maximum of ___ watts.. Answer:
50000
● During the first six months after an apparatus is received, while the paint and
protective coating are new and unseasoned, the vehicle should be washed frequently
with ___ water to harden the paint and keep it from spotting.. Answer: cold
● Steering wheel play should be now more than ___ degrees in either direction..
Answer: 10
● During a brake test, the vehicle should come to a complete stop from a speed of 20
mph within ___ feet.. Answer: 35
● Air pressure should build to a sufficient level to allow vehicle operations within ___
seconds of starting.. Answer: 60
● Air pressure protection valves prevent air horns from being operated when the
pressure in the air reservoir drops below ___ PSI.. Answer: 80
● A significant portion of fire apparatus collisions occur while the apparatus is being
driven in ___.. Answer: reverse
● Responding units should travel at least ___ feet apart.. Answer: 300-500
● According to the inside/outside method of positioning a fire apparatus, for a building
5 stories or less, the pumper parks ___ of the ladder truck.. Answer: inside
, ● According to the inside/outside method of positioning a fire apparatus, for a building
5 stories or more, the pumper parks ___ of the ladder truck.. Answer: outside
● Intake hose sections are commonly ___ feet in length.. Answer: 10-50
● The front wheels of the apparatus should be at least a ___-degree angle when
positioning at a hydrant.. Answer: 45
● Park wildland apparatus ___ to avoid blocking other fire apparatus or evacuating
vehicles.. Answer: off the roadway
● It is best to park command vehicles on ___ of the fire building. This giver a view of
two sides of the building.. Answer: corners
● 1 PSI will raise a column of water ___ feet.. Answer: 2.304
● ___ is the part of the total pressure lost while forcing water through pipes, fittings,
fire hose, and adapters.. Answer: Friction loss
● PTO units limit the capacity of the pump to about ___ GPM. Answer: 500
● The most common pump position on today's engines is ___ pump.. Answer: midship
mounted
● A disadvantage of the rear-mount pump is the exposure to ___ for the
driver/operator.. Answer: traffic
● The pump and pump piping must withstand a hydrostatic test of ___ PSI before
being placed in service.. Answer: 500
● Apparatus' with tanks that are 1000 gallons or larger must have at least a ___-inch
tank-to-fill line.. Answer: 2
● The most common type of valve on pump intake and discharges is a ___ valve..
Answer: ball-type
● When drafting, there should be a minimum of ___ inches of water around the
strainer.. Answer: 24
● A general rule of thumb is that one 1000 GPM rated pumper should supply the FDC
for every ___ sprinkler heads that are flowing.. Answer: 50
● ___ are one-way valves in the FDC that prevent back flow.. Answer: Check valves
