STUDY GUIDE TO FOA CERTIFICATION QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+||BRAND NEW
Any connector with a FOCIS standards document Ans✓✓✓Which fiber
optic connector may be used according to the EIA/TIA 568 cabling
standard?
The Performance level of unshielded twisted pair cable Ans✓✓✓What
UTP Cat 3, Cat 5e, and Cat 6 or Class D, E, and F rating indicate?
66 Punchdown blocks Ans✓✓✓Commerical phone systems (not VoIP
but POTS) traditionally use multipair UTP cables for backbone
connections with _running_____used in the telecom closet for
connections to horizontal cables running to the desktop.
Gigabet Ethernet Ans✓✓✓TIA Cat 5e or "enhanced Cat 5' cable or
ISO/IEC Class D cable was introduced to support the needs of what the
computer network?
100 MHz Ans✓✓✓For certifying Cat 5e/Class D Performance, installed
cables are tested at ________.
250 MHz Ans✓✓✓Category 6/Class E cabling is specified and must be
tested during certification to _______MHz.
, All of these Ans✓✓✓A copper time domain reflectometer (TDR) can be
used to find_________.
Keep the pairs twisted to within 1/2 inch of the termination
Ans✓✓✓When terminating Cat5e/6 or Class D/E UTP cabling, what
must be remembered to maintain the performance of the installed cable?
Bix block Ans✓✓✓Which punchdown block is more often used with
multipair cables for POTS (plain old telephone service) connections?
True Ans✓✓✓Standards are written by manufacturers as minimum
specifications to ensure interoperability among various manufacturer's
products.
True Ans✓✓✓While video surveillance systems traditionally used coax
cable, they can use UTP in a structured cabling system or fiber optics
also.
False Ans✓✓✓Gigabit and faster networks only work fiber optics.
False Ans✓✓✓Fiber optic installations do not require inspection for
compliance to local building or electrical codes since they do not contain
copper wires.
CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+||BRAND NEW
Any connector with a FOCIS standards document Ans✓✓✓Which fiber
optic connector may be used according to the EIA/TIA 568 cabling
standard?
The Performance level of unshielded twisted pair cable Ans✓✓✓What
UTP Cat 3, Cat 5e, and Cat 6 or Class D, E, and F rating indicate?
66 Punchdown blocks Ans✓✓✓Commerical phone systems (not VoIP
but POTS) traditionally use multipair UTP cables for backbone
connections with _running_____used in the telecom closet for
connections to horizontal cables running to the desktop.
Gigabet Ethernet Ans✓✓✓TIA Cat 5e or "enhanced Cat 5' cable or
ISO/IEC Class D cable was introduced to support the needs of what the
computer network?
100 MHz Ans✓✓✓For certifying Cat 5e/Class D Performance, installed
cables are tested at ________.
250 MHz Ans✓✓✓Category 6/Class E cabling is specified and must be
tested during certification to _______MHz.
, All of these Ans✓✓✓A copper time domain reflectometer (TDR) can be
used to find_________.
Keep the pairs twisted to within 1/2 inch of the termination
Ans✓✓✓When terminating Cat5e/6 or Class D/E UTP cabling, what
must be remembered to maintain the performance of the installed cable?
Bix block Ans✓✓✓Which punchdown block is more often used with
multipair cables for POTS (plain old telephone service) connections?
True Ans✓✓✓Standards are written by manufacturers as minimum
specifications to ensure interoperability among various manufacturer's
products.
True Ans✓✓✓While video surveillance systems traditionally used coax
cable, they can use UTP in a structured cabling system or fiber optics
also.
False Ans✓✓✓Gigabit and faster networks only work fiber optics.
False Ans✓✓✓Fiber optic installations do not require inspection for
compliance to local building or electrical codes since they do not contain
copper wires.
