COMPLETE TEST BANK
Test Bank For Hematology in Practice 2nd
Edition By Betty Ciesla Chapter 1-21
PRINTED PDF| ORIGINAL DOCUMENT DIRECT FROM THE PUBLISHER| 100% VERIFIED ANSWERS
DOWNLOAD IMMEDIATELY AFTER THE ORDER AND SUCCESS IN YOUR STUDIES
ALL CHAPTERS ARE INCLUDED FOR THE 2ND EDITION
For more Test Banks, ATI, HESI Exams and more contact us on:
©ExamsWizard | Academic Success Starts Here!
,Chapter 1: Introduction to Hematology and Basic Laboratory Practice
Multiple Choice
Identify the choice that best completes the statement or answers the question.
____ 1. Tube length when referring to the microscope is the:
a. Resolution power of the objective
b. Distance from the eyepiece to the objective
c. Numerical aperture
d. Magnitude of the image on the stage
____ 2. What is the most useful corrective action for the microscope when fine details cannot be visualized
in immature cells?
a. Open up diaphragm for maximum light.
b. Wipe off lenses with lens cleaner.
c. Get a new slide.
d. Move to a lower power.
____ 3. Which of the following behaviors is a violation of standard precautions?
a. Handwashing after glove removal
b. Use of impermeable laboratory gowns
c. Use of goggles and face shields
d. Placing laboratory notebooks on laboratory work area
____ 4. Standards and calibrators differ from control materials because:
a. An exact amount of analyte is present in a standard or calibrator
b. A variable amount of analyte is present depending on patient samples
c. Standards only need to be within a target range
d. Standards are run to the best estimate of the known value
____ 5. If the confidence interval for most laboratories is 95.5%, what is the acceptable range for
hemoglobin if a hemoglobin control was run with a mean of 12.5 and a standard deviation of 1.0?
a. 9.5 to 12.5
b. 10.5 to 14.5
c. 11.5 to 15.5
d. 10.0 to 13.5
____ 6. Proper mixing of samples and timely delivery of samples to the laboratory are both examples of:
a. Delta checks
b. Postanalytic variables
c. Preanalytic variables
d. Reflex testing
____ 7. A delta check is a historical reference on samples run in the laboratories. Once a sample fails a delta
check, the most obvious corrective action is to:
a. Verify the identification of the patient sample
b. Reestablish the parameters of the delta check
c. Perform reflex testing
, d. Perform a manual method
____ 8. Which of the following is the definition of a reference interval?
a. A solution of a known amount of analyte
b. Materials analyzed concurrently with unknown samples
c. Values established for a particular analyte, given a method, instrument, or patient
population
d. Validation techniques on flagged samples
____ 9. Which of the following is not considered a postanalytic variable?
a. Delta checks
b. Proper anticoagulant used
c. Specimen checked for clots
d. Critical results called
____ 10. Error analysis, standard protocols, and turnaround time are all part of the:
a. Quality assurance system
b. Quality control program
c. Reference standards
d. Delta check protocol
____ 11. The average of a group of data points is defined as the:
a. Mean
b. Mode
c. Median
d. Modicum
____ 12. Safety training is part of new employee training in health care and includes:
a. Biological hazards
b. Chemical hazards
c. Environmental hazards
d. All of the above
____ 13. Control materials are:
a. Analyzed concurrently with the unknown samples
b. Substances with a known amount of analyte
c. Used to calibrate the method
d. All of the above
____ 14. Delta checks are used in the hematology laboratory to:
a. Compare past patient results to the current result
b. Verify control accuracy
c. Establish a target range
d. Establish reference ranges for a particular analyte
____ 15. When handwashing after a patient contact, the soap application process should last at least:
a. 5 seconds
b. 15 seconds
c. 20 seconds
, d. 30 seconds
____ 16. Which of the following represents an example of a safety violation in the laboratory?
a. Application of cosmetics
b. Mouth pipetting
c. Consuming bottled water
d. All the above
True/False
Indicate whether the statement is true or false.
____ 17. Standard deviation is a measurement of precision.
____ 18. Accuracy is a measurement of the true value of an analyte.
____ 19. A normal distribution curve will have 99.7% of the measured values fall within 2 SDs.
Short Answer
Test Bank For Hematology in Practice 2nd
Edition By Betty Ciesla Chapter 1-21
PRINTED PDF| ORIGINAL DOCUMENT DIRECT FROM THE PUBLISHER| 100% VERIFIED ANSWERS
DOWNLOAD IMMEDIATELY AFTER THE ORDER AND SUCCESS IN YOUR STUDIES
ALL CHAPTERS ARE INCLUDED FOR THE 2ND EDITION
For more Test Banks, ATI, HESI Exams and more contact us on:
©ExamsWizard | Academic Success Starts Here!
,Chapter 1: Introduction to Hematology and Basic Laboratory Practice
Multiple Choice
Identify the choice that best completes the statement or answers the question.
____ 1. Tube length when referring to the microscope is the:
a. Resolution power of the objective
b. Distance from the eyepiece to the objective
c. Numerical aperture
d. Magnitude of the image on the stage
____ 2. What is the most useful corrective action for the microscope when fine details cannot be visualized
in immature cells?
a. Open up diaphragm for maximum light.
b. Wipe off lenses with lens cleaner.
c. Get a new slide.
d. Move to a lower power.
____ 3. Which of the following behaviors is a violation of standard precautions?
a. Handwashing after glove removal
b. Use of impermeable laboratory gowns
c. Use of goggles and face shields
d. Placing laboratory notebooks on laboratory work area
____ 4. Standards and calibrators differ from control materials because:
a. An exact amount of analyte is present in a standard or calibrator
b. A variable amount of analyte is present depending on patient samples
c. Standards only need to be within a target range
d. Standards are run to the best estimate of the known value
____ 5. If the confidence interval for most laboratories is 95.5%, what is the acceptable range for
hemoglobin if a hemoglobin control was run with a mean of 12.5 and a standard deviation of 1.0?
a. 9.5 to 12.5
b. 10.5 to 14.5
c. 11.5 to 15.5
d. 10.0 to 13.5
____ 6. Proper mixing of samples and timely delivery of samples to the laboratory are both examples of:
a. Delta checks
b. Postanalytic variables
c. Preanalytic variables
d. Reflex testing
____ 7. A delta check is a historical reference on samples run in the laboratories. Once a sample fails a delta
check, the most obvious corrective action is to:
a. Verify the identification of the patient sample
b. Reestablish the parameters of the delta check
c. Perform reflex testing
, d. Perform a manual method
____ 8. Which of the following is the definition of a reference interval?
a. A solution of a known amount of analyte
b. Materials analyzed concurrently with unknown samples
c. Values established for a particular analyte, given a method, instrument, or patient
population
d. Validation techniques on flagged samples
____ 9. Which of the following is not considered a postanalytic variable?
a. Delta checks
b. Proper anticoagulant used
c. Specimen checked for clots
d. Critical results called
____ 10. Error analysis, standard protocols, and turnaround time are all part of the:
a. Quality assurance system
b. Quality control program
c. Reference standards
d. Delta check protocol
____ 11. The average of a group of data points is defined as the:
a. Mean
b. Mode
c. Median
d. Modicum
____ 12. Safety training is part of new employee training in health care and includes:
a. Biological hazards
b. Chemical hazards
c. Environmental hazards
d. All of the above
____ 13. Control materials are:
a. Analyzed concurrently with the unknown samples
b. Substances with a known amount of analyte
c. Used to calibrate the method
d. All of the above
____ 14. Delta checks are used in the hematology laboratory to:
a. Compare past patient results to the current result
b. Verify control accuracy
c. Establish a target range
d. Establish reference ranges for a particular analyte
____ 15. When handwashing after a patient contact, the soap application process should last at least:
a. 5 seconds
b. 15 seconds
c. 20 seconds
, d. 30 seconds
____ 16. Which of the following represents an example of a safety violation in the laboratory?
a. Application of cosmetics
b. Mouth pipetting
c. Consuming bottled water
d. All the above
True/False
Indicate whether the statement is true or false.
____ 17. Standard deviation is a measurement of precision.
____ 18. Accuracy is a measurement of the true value of an analyte.
____ 19. A normal distribution curve will have 99.7% of the measured values fall within 2 SDs.
Short Answer
