OSHA refers to the area which it is reasonably foreseeable that partially or
completely suspended materials could fall as the
Give this one a try later!
Fall zone
What should be planned for in regards to getting a large crane to a job site?
Give this one a try later!
Constricting roads
What must be known prior to setting up your crane?
,Give this one a try later!
Location of underground vaults
When constructing crane mats, the best way to secure the timbers together is to:
Give this one a try later!
Bolt them together
The effective weight of an attachment is:
Give this one a try later!
Any of these options
Who is responsible for calculating net capacity?
Give this one a try later!
Crane Operator
Crane stability is based on:
Give this one a try later!
, The leverage principle
According to Table A of OSHA 1926.1408 the minimum clearance distance for a power
line at 100 KV is?
Give this one a try later!
15 ft.
How often should the crane operator inspect standard running wire rope?
Give this one a try later!
Every shift (When in use)
Where should the crane's outrigger pads or tracks be placed when working at ground
floor level near a cellar wall?
Give this one a try later!
At least as far back as the depth of the wall below ground
What is a cantilever section on a lattice boom crane?
Give this one a try later!
, The outermost section past the pendant line connection point
What may happen to a properly rigged load when lifted off the ground unless the
operator takes account of boom deflection?
Give this one a try later!
It could swing out away from the crane
Who is responsible for ensuring the crane owner is notified of any damage to the
crane or replacement/repair of wire rope?
Give this one a try later!
Crane User
While setting a crane up on unstable ground what must the operator ensure?
Give this one a try later!
The stabilizer is 90° to the pad
When using a luffing jib, decreasing the angle will _______?
Give this one a try later!
completely suspended materials could fall as the
Give this one a try later!
Fall zone
What should be planned for in regards to getting a large crane to a job site?
Give this one a try later!
Constricting roads
What must be known prior to setting up your crane?
,Give this one a try later!
Location of underground vaults
When constructing crane mats, the best way to secure the timbers together is to:
Give this one a try later!
Bolt them together
The effective weight of an attachment is:
Give this one a try later!
Any of these options
Who is responsible for calculating net capacity?
Give this one a try later!
Crane Operator
Crane stability is based on:
Give this one a try later!
, The leverage principle
According to Table A of OSHA 1926.1408 the minimum clearance distance for a power
line at 100 KV is?
Give this one a try later!
15 ft.
How often should the crane operator inspect standard running wire rope?
Give this one a try later!
Every shift (When in use)
Where should the crane's outrigger pads or tracks be placed when working at ground
floor level near a cellar wall?
Give this one a try later!
At least as far back as the depth of the wall below ground
What is a cantilever section on a lattice boom crane?
Give this one a try later!
, The outermost section past the pendant line connection point
What may happen to a properly rigged load when lifted off the ground unless the
operator takes account of boom deflection?
Give this one a try later!
It could swing out away from the crane
Who is responsible for ensuring the crane owner is notified of any damage to the
crane or replacement/repair of wire rope?
Give this one a try later!
Crane User
While setting a crane up on unstable ground what must the operator ensure?
Give this one a try later!
The stabilizer is 90° to the pad
When using a luffing jib, decreasing the angle will _______?
Give this one a try later!
