NEIEP 200 LATEST UPDATED FINAL EXAM NEWEST 2026 REAL
EXAM WITH COMPLETE QUESTIONS & CORRECT VERIFIED
ANSWERS GUARANTEED PASS A+ FULL REVISED! NEW BRAND!
Which lay of wire rope has the strand wires in line with
the rope axis?
Regular Lay
At what speed should the counterweight safeties be set
to trip?
Up to 10% higher than the car governor
Which type of safety uses an oil buffer between the car
and safety planks?
Type C
,What is the purpose of the terminal motion switch?
slow down and stop the car automatically at or near the
top or bottom landing
If you have a 3500 lb. car rated at 4000 lbs. capacity, how
much should the counterweight assembly weigh for a
normal 40% installation?
5100 lbs.
When the pit directional limit switch is actuated, the
normal circuits will allow the car to run
Up
_______should not be disassembled in the field.
, Oil Buffers
The loss of traction between the hoist ropes and the
machine driver when the counterweight lands on its
buffer avoids...
The elevator car being pulled into the overhead.
Refer to Table 1. With a safety factor of 5, what is the
breaking strength for 1 1/8" nylon rope?
52,000 lbs.
Which of the following applies to rope usage?
Prevent manila rope from unraveling by using whipping.
EXAM WITH COMPLETE QUESTIONS & CORRECT VERIFIED
ANSWERS GUARANTEED PASS A+ FULL REVISED! NEW BRAND!
Which lay of wire rope has the strand wires in line with
the rope axis?
Regular Lay
At what speed should the counterweight safeties be set
to trip?
Up to 10% higher than the car governor
Which type of safety uses an oil buffer between the car
and safety planks?
Type C
,What is the purpose of the terminal motion switch?
slow down and stop the car automatically at or near the
top or bottom landing
If you have a 3500 lb. car rated at 4000 lbs. capacity, how
much should the counterweight assembly weigh for a
normal 40% installation?
5100 lbs.
When the pit directional limit switch is actuated, the
normal circuits will allow the car to run
Up
_______should not be disassembled in the field.
, Oil Buffers
The loss of traction between the hoist ropes and the
machine driver when the counterweight lands on its
buffer avoids...
The elevator car being pulled into the overhead.
Refer to Table 1. With a safety factor of 5, what is the
breaking strength for 1 1/8" nylon rope?
52,000 lbs.
Which of the following applies to rope usage?
Prevent manila rope from unraveling by using whipping.
