SailPoint Certified IDN Engineer Combo Multi-list || A+
Certified.
What virtualization product are supported for a VA installations? correct answers vSphere,
Hyper-V, AWS and Azure
What network configuration options are available in a VA installation? correct answers Standard,
HTTP proxy & secure tunnel
Besides ports 80 & 443, what other ports are used in a standard VA configuration? correct
answers 22 (SSH), 53 (DNS) & 123 (NTP)
What ports need to be open to allow a proxy VA configuration to function correctly? correct
answers 443 & 80
Is a secure tunnel VA configuration compatible with HTTP Proxy? correct answers No
Why would you need to use a secure tunnel configuration in the VA? correct answers If you are
required to add outbound traffic to the allow list, and your firewall does not support domain
entries.
In a secure tunnel configuration what does the VA communicate with? correct answers Sailpoint
secure tunnel servers in the cloud.
Is it best practice to deploy VA's in the DMZ? correct answers Best practice, no. Technically
possible, yes. But it is not recommended
What are the issues with a VA deployed in the DMZ? correct answers Security, proximity and
connectivity.
Where should VAs be physically installed? correct answers As close to the source as possible.
Why would you want multiple clusters? correct answers So clusters could be closer to sources in
non-continuous networks
How many HA or DR scenarios are described in best practices? correct answers 3 in total. All
VAs Running, Switch Clusters and Standby Reactive Deployment
What are the advantages of All VAs Running? correct answers Automatic switching to another
VA is on goes down, full use of VAs, VAs stay up to date, low outage risk
What are the disadvantages of All VAs Running? correct answers Possible increased latency
What are the advantages of Switch Clusters HA configuration? correct answers DR VAs stay up-
to-date & DR VAs don't add latency, as they aren't processing anything until a DR event occurs
,What are the disadvantages of Switch Clusters HA configuration? correct answers 1) No
utilization of DR VA cluster,
2) Reconfiguration needed upon DR event, involving reentering of source credentials
3) Difficult if large number of sources to manage
What are the advantages of Standby Reactive HA configuration? correct answers VAs don't add
latency, as they aren't processing anything until a DR situation occurs
What are the disadvantages of Standby Reactive HA configuration? correct answers 1)
Turnaround time can be greater depending on deployment of VA DR
2) Relies on VA readiness
How many VA's can there be per VM? correct answers 1, the ratio is 1 VA to 1 VM
What is the old and new Linux OS used in the VA? correct answers Old=CoreOS, new=Flatcar
Why is TLS configured on the VA? correct answers Some connectors require it. AD,
OpenLDAP, OID, RACF, IBM i, RSA ...
What are the first 5 steps for installing a VA? correct answers Step 1. Download the virtual
appliance zip file
Step 2. Unzip and copy to your virtualization platform
Step 3. Start the virtual appliance image
Step 4. Login - User Name: sailpoint Password: S@ilp0int
Step 5. Change the password
What are the last 5 steps for installing a VA? correct answers Step 6. [Optional] Set a static IP
address and DNS settings
Step 7. Download va-config-1395-4702.yaml
Step 8. Set the value of keyPassphrase in va-config-1395-4702.yaml to match your
organization's passphrase.
Step 9. Copy settings to ~/config.yaml on the virtual appliance:
scp <download path>/va-config-1395-4702.yaml
sailpoint@<ip_address>:/home/sailpoint/config.yaml
Step 10. Test connection by clicking Test Appliance
10 Steps to install a VA correct answers Step 1. Download the virtual appliance zip file
Step 2. Unzip and copy to your virtualization platform
Step 3. Start the virtual appliance image
Step 4. Login - User Name: sailpoint Password: S@ilp0int
Step 5. Change the password
Step 6. [Optional] Set a static IP address and DNS settings
Step 7. Download va-config-1395-4702.yaml
Step 8. Set the value of keyPassphrase in va-config-1395-4702.yaml to match your
organization's passphrase.
Step 9. Copy settings to ~/config.yaml on the virtual appliance: scp <download path>
,/va-config-1395-4702.yaml sailpoint@<ip_address>:/home/sailpoint/config.yaml
Step 10. Test connection by clicking Test Appliance
Where do you get the *.yaml file? correct answers download it from the admin UI during the VA
creation process.
What are the three ways to get VA health information? correct answers Notifications, Admin
Dashboard and Admin / Connections / Virtual Appliances
Where do you enable VA debugging? correct answers Admin / Connections / Virtual Appliances
/ [select the cluster]. Enable debugging is at the bottom
What is the main or first log you should look at on the VA? correct answers ccg.log
Cloud Connected gateway
Needed to connect to your sources
Where is the ccg.log file located? Cloud Connected gateway correct answers /home/sailpoint/log/
Cloud Connected gateway
Logs: How many other logs are there? correct answers 6 total: ccg.log,charon.log, canal.log, and
relay.log,va_agent.log, fluent.log ,
ccg.log = Cloud Connected gateway
canal.log = secure tunnel service
relay.log = password intercept or PWI proxy
charon.log = connectivity
va_agent.log=Processes heartbeat, pulls queue jobs, and manages credentials,
fluent.log=Responsible for sending VA and CCG logs to SailPoint
What is the log file name used in the secure tunnel service? correct answers canal.log = secure
tunnel service
Needed if you are routing traffic through port 443
What is the service name and log for the password intercept or PWI proxy? correct answers The
log file is relay.log = password intercept or PWI proxy
What log should you look at for connectivity issue? correct answers charon.log = connectivity
Used to maintain VA local services, health, and updates
Responsible for sending VA and CCG logs to SailPoint correct answers fluent.log
Processes heartbeat, pulls queue jobs, and manages credentials correct answers va_agent.log
What is the command line example in the compass doc to check network connectivity? correct
answers grep -a "Networking check" log/charon.log | tail -1
, What tools are on the VM to view logs? correct answers cat might be there, they recommend
journalctl
What is the VA toolbox? correct answers The toolbox is your diagnostic container on the VA. It
contains pre-installed tools, as well as the ability to install tools on the fly.
What kind of tests can you run with the toolbox? correct answers Network connectivity, port
check, NTP connectivity, DNS, connectivity, routing, LDAPsearch and TLS in general.
Is the toolbox automatically started? correct answers No, the command is: ./tb start
If 2 VAs are in a cluster, and one VA is offline, will the other VA get upgraded if needed?
correct answers According the the essentials training (v192) no. That cluster will not be
upgraded if only one VA in the cluster is in a normal state.
What does Sailpoint tell you to disable on the VA? correct answers esx_dhcp_bump,
using: sudo systemctl disable esx_dhcp_bump
How do you restart the network stack or services on the VA? correct answers sudo systemctl
restart systemd-networkd
How do you view the OS network service logs on the VA? correct answers sudo journalctl -u
systemd-networkd
What should be the response to this command when run from the VA if the network connectivity
is correct?
curl -i https://partner019.identitynow.com correct answers 302 (found) Isn't this a redirect code?
How do you run tcpdump on the VA? correct answers tb tcpdump (parameters) or ./tb tcpdump
(parameters)
Why would you run tcpdump on the VA? correct answers If you run various commands, you
might look four latency issues.
Is 'limited resources' and 'no active appliance' a VA state/status or a alert notification? correct
answers Alert status
What are the four states of a VA within the admin UI? correct answers configuring, connected,
warning, failed
Where is the network configuration file in flatcar and how would you view or edit it? correct
answers /etc/systemd/network/static.network
Use the app 'cat' or 'sudoedit'
Can TLS connection be tested from the VA command line? correct answers Yes with openssl
Certified.
What virtualization product are supported for a VA installations? correct answers vSphere,
Hyper-V, AWS and Azure
What network configuration options are available in a VA installation? correct answers Standard,
HTTP proxy & secure tunnel
Besides ports 80 & 443, what other ports are used in a standard VA configuration? correct
answers 22 (SSH), 53 (DNS) & 123 (NTP)
What ports need to be open to allow a proxy VA configuration to function correctly? correct
answers 443 & 80
Is a secure tunnel VA configuration compatible with HTTP Proxy? correct answers No
Why would you need to use a secure tunnel configuration in the VA? correct answers If you are
required to add outbound traffic to the allow list, and your firewall does not support domain
entries.
In a secure tunnel configuration what does the VA communicate with? correct answers Sailpoint
secure tunnel servers in the cloud.
Is it best practice to deploy VA's in the DMZ? correct answers Best practice, no. Technically
possible, yes. But it is not recommended
What are the issues with a VA deployed in the DMZ? correct answers Security, proximity and
connectivity.
Where should VAs be physically installed? correct answers As close to the source as possible.
Why would you want multiple clusters? correct answers So clusters could be closer to sources in
non-continuous networks
How many HA or DR scenarios are described in best practices? correct answers 3 in total. All
VAs Running, Switch Clusters and Standby Reactive Deployment
What are the advantages of All VAs Running? correct answers Automatic switching to another
VA is on goes down, full use of VAs, VAs stay up to date, low outage risk
What are the disadvantages of All VAs Running? correct answers Possible increased latency
What are the advantages of Switch Clusters HA configuration? correct answers DR VAs stay up-
to-date & DR VAs don't add latency, as they aren't processing anything until a DR event occurs
,What are the disadvantages of Switch Clusters HA configuration? correct answers 1) No
utilization of DR VA cluster,
2) Reconfiguration needed upon DR event, involving reentering of source credentials
3) Difficult if large number of sources to manage
What are the advantages of Standby Reactive HA configuration? correct answers VAs don't add
latency, as they aren't processing anything until a DR situation occurs
What are the disadvantages of Standby Reactive HA configuration? correct answers 1)
Turnaround time can be greater depending on deployment of VA DR
2) Relies on VA readiness
How many VA's can there be per VM? correct answers 1, the ratio is 1 VA to 1 VM
What is the old and new Linux OS used in the VA? correct answers Old=CoreOS, new=Flatcar
Why is TLS configured on the VA? correct answers Some connectors require it. AD,
OpenLDAP, OID, RACF, IBM i, RSA ...
What are the first 5 steps for installing a VA? correct answers Step 1. Download the virtual
appliance zip file
Step 2. Unzip and copy to your virtualization platform
Step 3. Start the virtual appliance image
Step 4. Login - User Name: sailpoint Password: S@ilp0int
Step 5. Change the password
What are the last 5 steps for installing a VA? correct answers Step 6. [Optional] Set a static IP
address and DNS settings
Step 7. Download va-config-1395-4702.yaml
Step 8. Set the value of keyPassphrase in va-config-1395-4702.yaml to match your
organization's passphrase.
Step 9. Copy settings to ~/config.yaml on the virtual appliance:
scp <download path>/va-config-1395-4702.yaml
sailpoint@<ip_address>:/home/sailpoint/config.yaml
Step 10. Test connection by clicking Test Appliance
10 Steps to install a VA correct answers Step 1. Download the virtual appliance zip file
Step 2. Unzip and copy to your virtualization platform
Step 3. Start the virtual appliance image
Step 4. Login - User Name: sailpoint Password: S@ilp0int
Step 5. Change the password
Step 6. [Optional] Set a static IP address and DNS settings
Step 7. Download va-config-1395-4702.yaml
Step 8. Set the value of keyPassphrase in va-config-1395-4702.yaml to match your
organization's passphrase.
Step 9. Copy settings to ~/config.yaml on the virtual appliance: scp <download path>
,/va-config-1395-4702.yaml sailpoint@<ip_address>:/home/sailpoint/config.yaml
Step 10. Test connection by clicking Test Appliance
Where do you get the *.yaml file? correct answers download it from the admin UI during the VA
creation process.
What are the three ways to get VA health information? correct answers Notifications, Admin
Dashboard and Admin / Connections / Virtual Appliances
Where do you enable VA debugging? correct answers Admin / Connections / Virtual Appliances
/ [select the cluster]. Enable debugging is at the bottom
What is the main or first log you should look at on the VA? correct answers ccg.log
Cloud Connected gateway
Needed to connect to your sources
Where is the ccg.log file located? Cloud Connected gateway correct answers /home/sailpoint/log/
Cloud Connected gateway
Logs: How many other logs are there? correct answers 6 total: ccg.log,charon.log, canal.log, and
relay.log,va_agent.log, fluent.log ,
ccg.log = Cloud Connected gateway
canal.log = secure tunnel service
relay.log = password intercept or PWI proxy
charon.log = connectivity
va_agent.log=Processes heartbeat, pulls queue jobs, and manages credentials,
fluent.log=Responsible for sending VA and CCG logs to SailPoint
What is the log file name used in the secure tunnel service? correct answers canal.log = secure
tunnel service
Needed if you are routing traffic through port 443
What is the service name and log for the password intercept or PWI proxy? correct answers The
log file is relay.log = password intercept or PWI proxy
What log should you look at for connectivity issue? correct answers charon.log = connectivity
Used to maintain VA local services, health, and updates
Responsible for sending VA and CCG logs to SailPoint correct answers fluent.log
Processes heartbeat, pulls queue jobs, and manages credentials correct answers va_agent.log
What is the command line example in the compass doc to check network connectivity? correct
answers grep -a "Networking check" log/charon.log | tail -1
, What tools are on the VM to view logs? correct answers cat might be there, they recommend
journalctl
What is the VA toolbox? correct answers The toolbox is your diagnostic container on the VA. It
contains pre-installed tools, as well as the ability to install tools on the fly.
What kind of tests can you run with the toolbox? correct answers Network connectivity, port
check, NTP connectivity, DNS, connectivity, routing, LDAPsearch and TLS in general.
Is the toolbox automatically started? correct answers No, the command is: ./tb start
If 2 VAs are in a cluster, and one VA is offline, will the other VA get upgraded if needed?
correct answers According the the essentials training (v192) no. That cluster will not be
upgraded if only one VA in the cluster is in a normal state.
What does Sailpoint tell you to disable on the VA? correct answers esx_dhcp_bump,
using: sudo systemctl disable esx_dhcp_bump
How do you restart the network stack or services on the VA? correct answers sudo systemctl
restart systemd-networkd
How do you view the OS network service logs on the VA? correct answers sudo journalctl -u
systemd-networkd
What should be the response to this command when run from the VA if the network connectivity
is correct?
curl -i https://partner019.identitynow.com correct answers 302 (found) Isn't this a redirect code?
How do you run tcpdump on the VA? correct answers tb tcpdump (parameters) or ./tb tcpdump
(parameters)
Why would you run tcpdump on the VA? correct answers If you run various commands, you
might look four latency issues.
Is 'limited resources' and 'no active appliance' a VA state/status or a alert notification? correct
answers Alert status
What are the four states of a VA within the admin UI? correct answers configuring, connected,
warning, failed
Where is the network configuration file in flatcar and how would you view or edit it? correct
answers /etc/systemd/network/static.network
Use the app 'cat' or 'sudoedit'
Can TLS connection be tested from the VA command line? correct answers Yes with openssl