Nevada Commercial Pesticide Applicator
Certification Category C7 (Industrial,
Institutional, Structural) Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. Which section of a pesticide label contains information on hazards
to humans and domestic animals?
A. Ingredient statement
B. Precautionary statements
C. Warranty disclaimer
D. Directions for use
* The precautionary statements section describes health hazard
information and necessary protective measures for people and
animals when using the pesticide.*
2. What federal regulation defines commercial applicator
certification categories like industrial, institutional, and structural?
A. 7 U.S.C. 136 et seq.
B. 40 C.F.R. 171.101
C. 40 C.F.R. 122
, D. 29 C.F.R. 1910
* The Code of Federal Regulations at 40 CFR 171.101 identifies
commercial applicator certification categories, including industrial,
institutional, and structural pest control.*
3. In Nevada, which urban and structural category refers to
preservation of wood products?
A. C1
B. C2
C. C5
D. C7
* Nevada’s Category C7 is for the application of pesticides directly
to wood or wood products to prevent degradation by organisms.*
4. What is the primary purpose of personal protective equipment
(PPE) when applying pesticides?
A. To improve application efficiency
B. To reduce product cost
C. To protect the applicator from exposure
D. To enhance spray drift
* PPE is used to minimize the applicator’s exposure to hazardous
chemicals, lowering health risks.*
,5. Which pest is commonly associated with industrial and structural
environments?
A. Japanese beetle
B. Cockroach
C. Corn earworm
D. Colorado potato beetle
* Cockroaches are typical structural pests in buildings and
industrial settings.*
6. What does the signal word “Danger” indicate on a pesticide label?
A. Lowest toxicity
B. No hazard
C. Highest acute toxicity
D. Only aquatic hazard
* “Danger” is used on labels to indicate the highest level of acute
toxicity and severe hazard.*
7. Why must an applicator read and follow the entire pesticide label
before applying the product?
A. To save time
B. Because the label is legally enforceable
C. Only to check price
D. To see the distributor name
, * Pesticide labels are legal documents; applicators must follow all
label directions.*
8. Which device is used to measure wind speed before applying a
pesticide outdoors?
A. Thermometer
B. Hygrometer
C. Anemometer
D. Barometer
* An anemometer measures wind speed, which helps determine if
conditions are appropriate for application.*
9. What is the primary goal of integrated pest management (IPM)?
A. Eliminate all insects
B. Use only chemical controls
C. Use multiple strategies to manage pests effectively and safely
D. Increase pesticide sales
* IPM emphasizes the use of biological, cultural, physical, and
chemical controls to manage pests responsibly.*
10. What is a Restricted Use Pesticide (RUP)?
A. Any household pesticide
B. A pesticide restricted due to potential harm that requires
certified applicator use
Certification Category C7 (Industrial,
Institutional, Structural) Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. Which section of a pesticide label contains information on hazards
to humans and domestic animals?
A. Ingredient statement
B. Precautionary statements
C. Warranty disclaimer
D. Directions for use
* The precautionary statements section describes health hazard
information and necessary protective measures for people and
animals when using the pesticide.*
2. What federal regulation defines commercial applicator
certification categories like industrial, institutional, and structural?
A. 7 U.S.C. 136 et seq.
B. 40 C.F.R. 171.101
C. 40 C.F.R. 122
, D. 29 C.F.R. 1910
* The Code of Federal Regulations at 40 CFR 171.101 identifies
commercial applicator certification categories, including industrial,
institutional, and structural pest control.*
3. In Nevada, which urban and structural category refers to
preservation of wood products?
A. C1
B. C2
C. C5
D. C7
* Nevada’s Category C7 is for the application of pesticides directly
to wood or wood products to prevent degradation by organisms.*
4. What is the primary purpose of personal protective equipment
(PPE) when applying pesticides?
A. To improve application efficiency
B. To reduce product cost
C. To protect the applicator from exposure
D. To enhance spray drift
* PPE is used to minimize the applicator’s exposure to hazardous
chemicals, lowering health risks.*
,5. Which pest is commonly associated with industrial and structural
environments?
A. Japanese beetle
B. Cockroach
C. Corn earworm
D. Colorado potato beetle
* Cockroaches are typical structural pests in buildings and
industrial settings.*
6. What does the signal word “Danger” indicate on a pesticide label?
A. Lowest toxicity
B. No hazard
C. Highest acute toxicity
D. Only aquatic hazard
* “Danger” is used on labels to indicate the highest level of acute
toxicity and severe hazard.*
7. Why must an applicator read and follow the entire pesticide label
before applying the product?
A. To save time
B. Because the label is legally enforceable
C. Only to check price
D. To see the distributor name
, * Pesticide labels are legal documents; applicators must follow all
label directions.*
8. Which device is used to measure wind speed before applying a
pesticide outdoors?
A. Thermometer
B. Hygrometer
C. Anemometer
D. Barometer
* An anemometer measures wind speed, which helps determine if
conditions are appropriate for application.*
9. What is the primary goal of integrated pest management (IPM)?
A. Eliminate all insects
B. Use only chemical controls
C. Use multiple strategies to manage pests effectively and safely
D. Increase pesticide sales
* IPM emphasizes the use of biological, cultural, physical, and
chemical controls to manage pests responsibly.*
10. What is a Restricted Use Pesticide (RUP)?
A. Any household pesticide
B. A pesticide restricted due to potential harm that requires
certified applicator use
