CSX FREIGHT CONDUCTOR TEST 1 EXAM || MOST
RECENT EXAM 2026-2027 ACTUAL COMPLETE
REAL EXAM QUESTIONS AND CORRECT
ANSWERS (VERIFIED ANSWERS) ALREADY
GRADED A+ | GURANTEED SUCCESS!!
| NEWEST EXAM | JUST RELEASED!!
What is the distance you should stand from a switch or derail
associated with
the route of a passing train? - ANSWER
-30 feet
When crossing tracks with standing cars in the tracks what
must the employee
do before crossing? Select all that apply - ANSWER -1) Cross
more than 25
feet from the end of
standing cars
2)stop and look both
ways
When dismounting from equipment what must you do? Select
all that apply - ANSWER -1) Stop at the bottom step or ladder
rung to ensure solid footing before dismounting.
2) Ensure a safe area to dismount clear of obstructions
,When crossing over a piece of equipment utilizing 3 points of
contact what must
you not do? - ANSWER -Step on any part of the hand brake,
cut lever, angle
cock, coupler, or components of the cushion
underframe.
When riding on equipment maintaining 3 points of contact and
being prepared
for slack or unexpected movements what else must you
do? - ANSWER -
Position body facing the equipment and look
direction of travel
Do not ride on equipment unless the equipment is equipped
with what? - ANSWER -A horizontal grab iron at least 12 inches
above the floor of the car or at least one vertical grab iron that
allowed the employee to stand upright
What is a written or electronically transmitted special
instruction concerning the safety of employees and the
movement of trains over a specific subdivision? - ANSWER -
Subdivision Bulletin
What is a computer generated form issued by the train
dispatcher containing current operating instructions that apply
to the train addressed as well as information relating to the
most recently issued system and division bulletins? - ANSWER
-Dispatcher Bulletin
, What is a computer-generated form advising of a dispatcher
bulletin number and number of train messages it must
contain? - ANSWER -Release Form
You are assigned to the Q357 at 1500 and you arrive and find
your dispatcher
bulletin is timestamped for 1030, What is required for you to
do? - ANSWER -
Contact the
dispatcher
What is a form used to record specific instructions or dispatcher
messages from
the train dispatcher regarding movements on controlled
tracks? - ANSWER -
Form
EC-1
You are assigned to the Q178, upon arriving on duty in your job
briefing you notice the conductor and locomotive operator
names are incorrect. What is required for you to do in this
situation? - ANSWER -Notify the train dispatcher and confirm
the dispatcher bulletin number
Where are permanent track speeds designated?
- ANSWER -Special
Instructions
Where are temporary track speeds designated? Select
all that apply - ANSWER
RECENT EXAM 2026-2027 ACTUAL COMPLETE
REAL EXAM QUESTIONS AND CORRECT
ANSWERS (VERIFIED ANSWERS) ALREADY
GRADED A+ | GURANTEED SUCCESS!!
| NEWEST EXAM | JUST RELEASED!!
What is the distance you should stand from a switch or derail
associated with
the route of a passing train? - ANSWER
-30 feet
When crossing tracks with standing cars in the tracks what
must the employee
do before crossing? Select all that apply - ANSWER -1) Cross
more than 25
feet from the end of
standing cars
2)stop and look both
ways
When dismounting from equipment what must you do? Select
all that apply - ANSWER -1) Stop at the bottom step or ladder
rung to ensure solid footing before dismounting.
2) Ensure a safe area to dismount clear of obstructions
,When crossing over a piece of equipment utilizing 3 points of
contact what must
you not do? - ANSWER -Step on any part of the hand brake,
cut lever, angle
cock, coupler, or components of the cushion
underframe.
When riding on equipment maintaining 3 points of contact and
being prepared
for slack or unexpected movements what else must you
do? - ANSWER -
Position body facing the equipment and look
direction of travel
Do not ride on equipment unless the equipment is equipped
with what? - ANSWER -A horizontal grab iron at least 12 inches
above the floor of the car or at least one vertical grab iron that
allowed the employee to stand upright
What is a written or electronically transmitted special
instruction concerning the safety of employees and the
movement of trains over a specific subdivision? - ANSWER -
Subdivision Bulletin
What is a computer generated form issued by the train
dispatcher containing current operating instructions that apply
to the train addressed as well as information relating to the
most recently issued system and division bulletins? - ANSWER
-Dispatcher Bulletin
, What is a computer-generated form advising of a dispatcher
bulletin number and number of train messages it must
contain? - ANSWER -Release Form
You are assigned to the Q357 at 1500 and you arrive and find
your dispatcher
bulletin is timestamped for 1030, What is required for you to
do? - ANSWER -
Contact the
dispatcher
What is a form used to record specific instructions or dispatcher
messages from
the train dispatcher regarding movements on controlled
tracks? - ANSWER -
Form
EC-1
You are assigned to the Q178, upon arriving on duty in your job
briefing you notice the conductor and locomotive operator
names are incorrect. What is required for you to do in this
situation? - ANSWER -Notify the train dispatcher and confirm
the dispatcher bulletin number
Where are permanent track speeds designated?
- ANSWER -Special
Instructions
Where are temporary track speeds designated? Select
all that apply - ANSWER
