TCFP Fire Inspector Exam
Questions and Answers 100%
PASS
The primary role of a inspector is to:—ANSWER-Identify fire hazards and ensure code
compliance
Which code is most commonly used by fire inspectors in Texas?—ANSWER-IFC
What is the primary goal of fire prevention inspections?—ANSWER-Reduce loss of life and
property
What type of occupancy presents the highest life safety risk?—ANSWER-Assembly
Exit dorrs must swing in the direction of egress travel when:—ANSWER-Occupant load is 50
or more
What is the minimum required number of exits for most occupancies?—ANSWER-2
What is the maximum travel distance to an exit in a nonsprinkled building(general)?—
ANSWER-200 Feet
Fire extinguishers are classified based on:—ANSWER-Type of fire
Which extinguisher is appropriate for energized electrical fires?—ANSWER-Class C
What does "means of egress" include?—ANSWER-Exit access, exit, and exit discharge
, Emergency lighting is required to:—ANSWER-Provide light during power failure
Exit signs must be illuminated:—ANSWER-At all times the building is occupied
What is the primary hazard of blocked exits?—ANSWER-Delayed evacuation
Fire alarm systems are designed primarily to:—ANSWER-Notify occupants of a fire
Who is responsible for maintaining fire protection systems?—ANSWER-Building owner or
occupant
Sprinkler systems are designed to:—ANSWER-Control fires until firefighters arrive
A fire inspector should document violations using:—ANSWER-Written inspection reports
What is a common cause of fire code violations?—ANSWER-Poor housekeeping
Combustible storage should be kept how fare from sprinkler deflectors?—ANSWER-18
inches
What is the inspector's authority derived from?—ANSWER-State and local law
What is an occupancy load based on?—ANSWER-Square footage and use
What is a "change of occupancy"?—ANSWER-New use of a building
Which inspection focuses on public gatherings?—ANSWER-Assembly inspections
What is the most common violation in commercial kitchens?—ANSWER-Grease
accumulation
Hood suppression systems are designed to protect:—ANSWER-Cooking equipment
What is the purpose of fire lanes?—ANSWER-Emergency vehicle access?
© 2026 Copyright. All Rights Reserved. This document is
protected by copyright law, Copyrighted By Brittie Donald
Questions and Answers 100%
PASS
The primary role of a inspector is to:—ANSWER-Identify fire hazards and ensure code
compliance
Which code is most commonly used by fire inspectors in Texas?—ANSWER-IFC
What is the primary goal of fire prevention inspections?—ANSWER-Reduce loss of life and
property
What type of occupancy presents the highest life safety risk?—ANSWER-Assembly
Exit dorrs must swing in the direction of egress travel when:—ANSWER-Occupant load is 50
or more
What is the minimum required number of exits for most occupancies?—ANSWER-2
What is the maximum travel distance to an exit in a nonsprinkled building(general)?—
ANSWER-200 Feet
Fire extinguishers are classified based on:—ANSWER-Type of fire
Which extinguisher is appropriate for energized electrical fires?—ANSWER-Class C
What does "means of egress" include?—ANSWER-Exit access, exit, and exit discharge
, Emergency lighting is required to:—ANSWER-Provide light during power failure
Exit signs must be illuminated:—ANSWER-At all times the building is occupied
What is the primary hazard of blocked exits?—ANSWER-Delayed evacuation
Fire alarm systems are designed primarily to:—ANSWER-Notify occupants of a fire
Who is responsible for maintaining fire protection systems?—ANSWER-Building owner or
occupant
Sprinkler systems are designed to:—ANSWER-Control fires until firefighters arrive
A fire inspector should document violations using:—ANSWER-Written inspection reports
What is a common cause of fire code violations?—ANSWER-Poor housekeeping
Combustible storage should be kept how fare from sprinkler deflectors?—ANSWER-18
inches
What is the inspector's authority derived from?—ANSWER-State and local law
What is an occupancy load based on?—ANSWER-Square footage and use
What is a "change of occupancy"?—ANSWER-New use of a building
Which inspection focuses on public gatherings?—ANSWER-Assembly inspections
What is the most common violation in commercial kitchens?—ANSWER-Grease
accumulation
Hood suppression systems are designed to protect:—ANSWER-Cooking equipment
What is the purpose of fire lanes?—ANSWER-Emergency vehicle access?
© 2026 Copyright. All Rights Reserved. This document is
protected by copyright law, Copyrighted By Brittie Donald
