CSA W59 exam questions with answers
|\ |\ |\ |\ |\
Steel base metal to be welded under this standard shall
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
conform to the requirements of what two standards ? -
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
CORRECT ANSWERS ✔✔CSA or ASTM Standards |\ |\ |\ |\ |\
Drawing Design Documents shall show what two groove
|\ |\ |\ |\ |\ |\ |\ |\
weld requirements - CORRECT ANSWERS ✔✔CJP=
|\ |\ |\ |\ |\ |\
Complete Joint Penetration |\ |\ |\
PJP = Partial Joint Penetration
|\ |\ |\ |\
Welds shall be Classified as ? - CORRECT ANSWERS
|\ |\ |\ |\ |\ |\ |\ |\ |\
✔✔Groove, Fillet , Plug , Slot welds |\ |\ |\ |\ |\ |\
Welding shall not be done when the Ambient Temperature
|\ |\ |\ |\ |\ |\ |\ |\
lower then ____, - CORRECT ANSWERS ✔✔-18 C / (0.F)
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
electrode classification used in this standard is - CORRECT
|\ |\ |\ |\ |\ |\ |\ |\
ANSWERS ✔✔CSA W48 or AWS A5
|\ |\ |\ |\ |\ |\
low Alloy steel filler metals and shielding combinations for
|\ |\ |\ |\ |\ |\ |\ |\
GMAW , GTAW , MCAW and FCAW shall conform to what
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
requirements - CORRECT ANSWERS ✔✔AWS A5.28/ |\ |\ |\ |\ |\ |\
A5.28M , A5.29/ A5.29M ,A5.36 / A5.36 M
|\ |\ |\ |\ |\ |\ |\
|\ |\ |\ |\ |\
Steel base metal to be welded under this standard shall
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
conform to the requirements of what two standards ? -
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
CORRECT ANSWERS ✔✔CSA or ASTM Standards |\ |\ |\ |\ |\
Drawing Design Documents shall show what two groove
|\ |\ |\ |\ |\ |\ |\ |\
weld requirements - CORRECT ANSWERS ✔✔CJP=
|\ |\ |\ |\ |\ |\
Complete Joint Penetration |\ |\ |\
PJP = Partial Joint Penetration
|\ |\ |\ |\
Welds shall be Classified as ? - CORRECT ANSWERS
|\ |\ |\ |\ |\ |\ |\ |\ |\
✔✔Groove, Fillet , Plug , Slot welds |\ |\ |\ |\ |\ |\
Welding shall not be done when the Ambient Temperature
|\ |\ |\ |\ |\ |\ |\ |\
lower then ____, - CORRECT ANSWERS ✔✔-18 C / (0.F)
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
electrode classification used in this standard is - CORRECT
|\ |\ |\ |\ |\ |\ |\ |\
ANSWERS ✔✔CSA W48 or AWS A5
|\ |\ |\ |\ |\ |\
low Alloy steel filler metals and shielding combinations for
|\ |\ |\ |\ |\ |\ |\ |\
GMAW , GTAW , MCAW and FCAW shall conform to what
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
requirements - CORRECT ANSWERS ✔✔AWS A5.28/ |\ |\ |\ |\ |\ |\
A5.28M , A5.29/ A5.29M ,A5.36 / A5.36 M
|\ |\ |\ |\ |\ |\ |\