Texas Structural Pest Control – General
Exam Review with Answers and
Rationales | 100% Pass Guaranteed |
Graded A+
1. The primary purpose of the Texas Structural Pest Control Service is to:
A. Regulate farming pesticides
B. Protect public health, property, and the environment
C. Sell pest control products
D. Eliminate all insects in Texas
The program focuses on safe, effective pest management to protect people,
structures, and the environment.
2. Which agency administers structural pest control in Texas?
A. EPA
B. USDA
C. Texas Department of Agriculture (TDA)
D. Texas Health Department
The TDA oversees licensing, enforcement, and regulation.
3. An applicator must follow pesticide use according to:
A. Customer preference
B. Employer instructions only
C. The product label
D. Local store recommendations
The label is a legal document and must be followed.
4. Using a pesticide in a manner inconsistent with its label is:
,A. Acceptable if effective
B. Recommended for severe infestations
C. A violation of federal and state law
D. Allowed with supervisor approval
Improper use violates FIFRA and state regulations.
5. The signal word “Danger” on a pesticide label indicates:
A. Slight toxicity
B. Moderate toxicity
C. High toxicity
D. No hazard
“Danger” indicates the highest level of acute toxicity.
6. The most common route of pesticide exposure for applicators is:
A. Inhalation
B. Skin absorption
C. Ingestion
D. Eye contact
Dermal exposure is the most frequent occupational risk.
7. Personal protective equipment (PPE) requirements are found:
A. In company manuals
B. At hardware stores
C. On the pesticide label
D. In OSHA posters only
The label specifies minimum required PPE.
8. What does IPM stand for?
A. Insect Prevention Method
B. Integrated Pest Management
, C. Indoor Pest Monitoring
D. Industrial Pesticide Management
IPM combines multiple control methods to minimize risk.
9. Which is an example of a cultural control?
A. Spraying insecticide
B. Using traps
C. Removing food and water sources
D. Fogging
Sanitation and habitat modification reduce pest survival.
10. The term “residual pesticide” refers to:
A. A pesticide that evaporates quickly
B. A pesticide that remains active after application
C. A pesticide used indoors only
D. A restricted-use pesticide
Residual activity provides continued control.
11. Restricted Use Pesticides (RUPs) can be applied by:
A. Anyone
B. Homeowners only
C. Licensed or supervised applicators
D. Store employees
RUPs require certification due to higher risk.
12. Which document provides detailed safety information about a pesticide?
A. Warranty card
B. Safety Data Sheet (SDS)
C. Receipt
D. Application log
Exam Review with Answers and
Rationales | 100% Pass Guaranteed |
Graded A+
1. The primary purpose of the Texas Structural Pest Control Service is to:
A. Regulate farming pesticides
B. Protect public health, property, and the environment
C. Sell pest control products
D. Eliminate all insects in Texas
The program focuses on safe, effective pest management to protect people,
structures, and the environment.
2. Which agency administers structural pest control in Texas?
A. EPA
B. USDA
C. Texas Department of Agriculture (TDA)
D. Texas Health Department
The TDA oversees licensing, enforcement, and regulation.
3. An applicator must follow pesticide use according to:
A. Customer preference
B. Employer instructions only
C. The product label
D. Local store recommendations
The label is a legal document and must be followed.
4. Using a pesticide in a manner inconsistent with its label is:
,A. Acceptable if effective
B. Recommended for severe infestations
C. A violation of federal and state law
D. Allowed with supervisor approval
Improper use violates FIFRA and state regulations.
5. The signal word “Danger” on a pesticide label indicates:
A. Slight toxicity
B. Moderate toxicity
C. High toxicity
D. No hazard
“Danger” indicates the highest level of acute toxicity.
6. The most common route of pesticide exposure for applicators is:
A. Inhalation
B. Skin absorption
C. Ingestion
D. Eye contact
Dermal exposure is the most frequent occupational risk.
7. Personal protective equipment (PPE) requirements are found:
A. In company manuals
B. At hardware stores
C. On the pesticide label
D. In OSHA posters only
The label specifies minimum required PPE.
8. What does IPM stand for?
A. Insect Prevention Method
B. Integrated Pest Management
, C. Indoor Pest Monitoring
D. Industrial Pesticide Management
IPM combines multiple control methods to minimize risk.
9. Which is an example of a cultural control?
A. Spraying insecticide
B. Using traps
C. Removing food and water sources
D. Fogging
Sanitation and habitat modification reduce pest survival.
10. The term “residual pesticide” refers to:
A. A pesticide that evaporates quickly
B. A pesticide that remains active after application
C. A pesticide used indoors only
D. A restricted-use pesticide
Residual activity provides continued control.
11. Restricted Use Pesticides (RUPs) can be applied by:
A. Anyone
B. Homeowners only
C. Licensed or supervised applicators
D. Store employees
RUPs require certification due to higher risk.
12. Which document provides detailed safety information about a pesticide?
A. Warranty card
B. Safety Data Sheet (SDS)
C. Receipt
D. Application log
