JLTV TEST "A" EXAM QUESTIONS AND
ANSWERS. VERIFIED 2026.
4 VARIATONS OF JLTV - ANS Utility, General Purpose, Heavy Guns Carrier, Close Combat
Weapons Carrier
Why do the High Pressure Gas (HPG) pumps automatically stop running after continuously for
10 minutes? - ANS C. To prevent the system from overheating
The transaxle receives power from the __ and transfers it to the front and rear wheels. -
ANS B. Transmission
Using the picture below, write the height of each of the red lines. - ANS 60in, 30in
Explain, in your own words, the advantages of air over hydraulic brakes from a standard braking
system. - ANS Quick stops, more reliability
Label the buttons on the MUX panel. - ANS Blackout, clearance lights, dome lights, dome
light dimmer, dash light dimmer
List the five High Pressure Gas (HPG) Suspension Settings the DRIVER uses. - ANS Operational,
Tie down, SAES, Loading, Muck Switch Panel
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, How does using the Combat Override switch affect the JLTV? Select all that apply. - ANS All of
the above.
What tool is shown below and what is its purpose? - ANS Ingress tool, locks and unlocks
doors.
What do you do if an item in the Basic Issue Items (BII) appears to be unserviceable? - ANS D.
Annotate it on the BII Inventory and call Field Maintenance
What is the lowest temperature you should use the arctic kit when starting the vehicle? -
ANS D. -40*F
On which variant is the spare tire located at the rear of the vehicle? Select all that apply. -
ANS CCWC, HGC, GP
List five pre-check items you inspect before driving the JLTV? - ANS Mirrors, Gauges, Lights,
Any damage to vehicle, Fuel
Why must you install suspension lock-out braces before crawling under the vehicle? - ANS To
prevent the vehicle from falling and crushing you.
While conducting PMCS, you notice the transmission fluid has a small leak but it is not big
enough to form a drop. Classify the leak and decide if you can operate the vehicle. - ANS A. It
is a Class I leak so you can operate the vehicle.
Identify the fill locations on the following image of the JLTV engine. Write the letter of the
location next to the corresponding fill location description. - ANS A and D, G, F, E, B, C
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
ANSWERS. VERIFIED 2026.
4 VARIATONS OF JLTV - ANS Utility, General Purpose, Heavy Guns Carrier, Close Combat
Weapons Carrier
Why do the High Pressure Gas (HPG) pumps automatically stop running after continuously for
10 minutes? - ANS C. To prevent the system from overheating
The transaxle receives power from the __ and transfers it to the front and rear wheels. -
ANS B. Transmission
Using the picture below, write the height of each of the red lines. - ANS 60in, 30in
Explain, in your own words, the advantages of air over hydraulic brakes from a standard braking
system. - ANS Quick stops, more reliability
Label the buttons on the MUX panel. - ANS Blackout, clearance lights, dome lights, dome
light dimmer, dash light dimmer
List the five High Pressure Gas (HPG) Suspension Settings the DRIVER uses. - ANS Operational,
Tie down, SAES, Loading, Muck Switch Panel
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, How does using the Combat Override switch affect the JLTV? Select all that apply. - ANS All of
the above.
What tool is shown below and what is its purpose? - ANS Ingress tool, locks and unlocks
doors.
What do you do if an item in the Basic Issue Items (BII) appears to be unserviceable? - ANS D.
Annotate it on the BII Inventory and call Field Maintenance
What is the lowest temperature you should use the arctic kit when starting the vehicle? -
ANS D. -40*F
On which variant is the spare tire located at the rear of the vehicle? Select all that apply. -
ANS CCWC, HGC, GP
List five pre-check items you inspect before driving the JLTV? - ANS Mirrors, Gauges, Lights,
Any damage to vehicle, Fuel
Why must you install suspension lock-out braces before crawling under the vehicle? - ANS To
prevent the vehicle from falling and crushing you.
While conducting PMCS, you notice the transmission fluid has a small leak but it is not big
enough to form a drop. Classify the leak and decide if you can operate the vehicle. - ANS A. It
is a Class I leak so you can operate the vehicle.
Identify the fill locations on the following image of the JLTV engine. Write the letter of the
location next to the corresponding fill location description. - ANS A and D, G, F, E, B, C
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
