MICHIGAN STATE BRAKES CERTIFICATION
EXAM EXAMINATION TEST 2026
COMPLETE QUESTIONS AND SOLUTIONS
GRADED A+
⩥ Warped brake rotors. Answer: Brake rotors that are unevenly shaped,
causing braking issues.
⩥ Contaminated brake fluid. Answer: Brake fluid that has been mixed
with foreign substances, affecting performance.
⩥ Internal leak in the master cylinder. Answer: A failure within the
master cylinder that allows brake fluid to escape.
⩥ Faulty brake booster. Answer: A malfunctioning device that assists in
applying the brakes.
⩥ Vacuum power brake booster test. Answer: A procedure to check the
functionality of the brake booster.
⩥ Disconnect the vacuum hose. Answer: To remove the hose connected
to the brake booster to observe engine idle.
, ⩥ Pump the brake pedal. Answer: To repeatedly press the brake pedal to
build pressure in the brake system.
⩥ Depressurize an ABS system. Answer: The process of releasing
pressure from the ABS brake system.
⩥ Open the bleeder valves. Answer: To allow brake fluid to escape from
the brake system for maintenance.
⩥ Disconnect the ABS fuse. Answer: To disable the ABS system for
testing or maintenance.
⩥ Pump the brake pedal at least 25 times. Answer: A method to
depressurize the ABS system with the ignition off.
⩥ Run the ABS self-diagnostic test. Answer: A procedure to check the
functionality of the ABS system.
⩥ Dragging rear brakes. Answer: A condition where the rear brakes do
not fully release after being applied.
⩥ Warped drums. Answer: Brake drums that are unevenly shaped,
leading to braking issues.
EXAM EXAMINATION TEST 2026
COMPLETE QUESTIONS AND SOLUTIONS
GRADED A+
⩥ Warped brake rotors. Answer: Brake rotors that are unevenly shaped,
causing braking issues.
⩥ Contaminated brake fluid. Answer: Brake fluid that has been mixed
with foreign substances, affecting performance.
⩥ Internal leak in the master cylinder. Answer: A failure within the
master cylinder that allows brake fluid to escape.
⩥ Faulty brake booster. Answer: A malfunctioning device that assists in
applying the brakes.
⩥ Vacuum power brake booster test. Answer: A procedure to check the
functionality of the brake booster.
⩥ Disconnect the vacuum hose. Answer: To remove the hose connected
to the brake booster to observe engine idle.
, ⩥ Pump the brake pedal. Answer: To repeatedly press the brake pedal to
build pressure in the brake system.
⩥ Depressurize an ABS system. Answer: The process of releasing
pressure from the ABS brake system.
⩥ Open the bleeder valves. Answer: To allow brake fluid to escape from
the brake system for maintenance.
⩥ Disconnect the ABS fuse. Answer: To disable the ABS system for
testing or maintenance.
⩥ Pump the brake pedal at least 25 times. Answer: A method to
depressurize the ABS system with the ignition off.
⩥ Run the ABS self-diagnostic test. Answer: A procedure to check the
functionality of the ABS system.
⩥ Dragging rear brakes. Answer: A condition where the rear brakes do
not fully release after being applied.
⩥ Warped drums. Answer: Brake drums that are unevenly shaped,
leading to braking issues.
