NYC Sign Hanger License Exam Questions With
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. Which NYC department regulates the installation of signs?
A) NYC Fire Department
B) NYC Department of Buildings
C) NYC Department of Transportation
D) NYC Department of Health
B) NYC Department of Buildings
The DOB enforces all rules and permits for sign installation and
safety compliance.
2. What is the minimum clearance required for a pedestrian walkway
under a projecting sign?
A) 6 feet
B) 7 feet
C) 8 feet
D) 9 feet
C) 8 feet
NYC building codes mandate a minimum of 8 feet to ensure
pedestrian safety.
3. Before installing a sign on a building, you must:
A) Notify local police
B) Obtain a permit from the DOB
C) Get approval from neighbors
D) Conduct a safety drill
B) Obtain a permit from the DOB
, A permit ensures the sign meets structural, zoning, and safety
regulations.
4. A “wall sign” is defined as:
A) A sign projecting from a building
B) A sign mounted flush against a building wall
C) A freestanding sign in front of a building
D) Any temporary banner
B) A sign mounted flush against a building wall
Wall signs are attached directly to the wall surface, unlike
projecting or freestanding signs.
5. Which material is typically NOT allowed for exterior signs in NYC?
A) Aluminum
B) Wood
C) Paper
D) Steel
C) Paper
Paper is not durable or weather-resistant enough for permanent
exterior signage.
6. The maximum projection of a sign over a public sidewalk is:
A) 4 feet
B) 6 feet
C) 8 feet
D) 10 feet
B) 6 feet
NYC code limits sign projections to prevent obstruction or hazards
to pedestrians.
, 7. When installing an illuminated sign, you must ensure:
A) It is only visible during daytime
B) It meets electrical codes and DOB approval
C) It is brighter than street lights
D) It flashes at intervals
B) It meets electrical codes and DOB approval
Electrical compliance prevents fire hazards and ensures safe
wiring.
8. Anchoring a sign into a building facade requires:
A) Adhesive only
B) Screws or bolts rated for structural loads
C) Tape or glue
D) Rope supports
B) Screws or bolts rated for structural loads
Proper fasteners are critical to prevent the sign from falling.
9. Temporary banners do not require a permit if they are displayed
for:
A) 1 week
B) 15 days
C) 30 days
D) 60 days
C) 30 days
NYC allows short-term signage without permits for up to 30 days.
10. Which of the following signs requires a structural engineer’s
certification?
A) Small window decal
B) Roof-mounted sign over 100 pounds
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. Which NYC department regulates the installation of signs?
A) NYC Fire Department
B) NYC Department of Buildings
C) NYC Department of Transportation
D) NYC Department of Health
B) NYC Department of Buildings
The DOB enforces all rules and permits for sign installation and
safety compliance.
2. What is the minimum clearance required for a pedestrian walkway
under a projecting sign?
A) 6 feet
B) 7 feet
C) 8 feet
D) 9 feet
C) 8 feet
NYC building codes mandate a minimum of 8 feet to ensure
pedestrian safety.
3. Before installing a sign on a building, you must:
A) Notify local police
B) Obtain a permit from the DOB
C) Get approval from neighbors
D) Conduct a safety drill
B) Obtain a permit from the DOB
, A permit ensures the sign meets structural, zoning, and safety
regulations.
4. A “wall sign” is defined as:
A) A sign projecting from a building
B) A sign mounted flush against a building wall
C) A freestanding sign in front of a building
D) Any temporary banner
B) A sign mounted flush against a building wall
Wall signs are attached directly to the wall surface, unlike
projecting or freestanding signs.
5. Which material is typically NOT allowed for exterior signs in NYC?
A) Aluminum
B) Wood
C) Paper
D) Steel
C) Paper
Paper is not durable or weather-resistant enough for permanent
exterior signage.
6. The maximum projection of a sign over a public sidewalk is:
A) 4 feet
B) 6 feet
C) 8 feet
D) 10 feet
B) 6 feet
NYC code limits sign projections to prevent obstruction or hazards
to pedestrians.
, 7. When installing an illuminated sign, you must ensure:
A) It is only visible during daytime
B) It meets electrical codes and DOB approval
C) It is brighter than street lights
D) It flashes at intervals
B) It meets electrical codes and DOB approval
Electrical compliance prevents fire hazards and ensures safe
wiring.
8. Anchoring a sign into a building facade requires:
A) Adhesive only
B) Screws or bolts rated for structural loads
C) Tape or glue
D) Rope supports
B) Screws or bolts rated for structural loads
Proper fasteners are critical to prevent the sign from falling.
9. Temporary banners do not require a permit if they are displayed
for:
A) 1 week
B) 15 days
C) 30 days
D) 60 days
C) 30 days
NYC allows short-term signage without permits for up to 30 days.
10. Which of the following signs requires a structural engineer’s
certification?
A) Small window decal
B) Roof-mounted sign over 100 pounds
