EEOCA read ahead || A+ Guaranteed.
Explosive Ordnance correct answers Bombs and warheads; guided and ballistic missiles;
artillery, mortar, rocket, and
small arms ammunition; all mines; torpedoes; depth charges; demolition charges; pyrotechnics;
clusters and
dispensers: cartridge- and propellant-actuated devices; electroexplosive devices; clandestine and
lEDs; and
all similar or related items or components, explosive in nature, which may cause injury or death
to personnel
or damage to materiel. This definition includes all munitions containing explosives, propellants,
nuclear
fission, fusion, or radiological materials, and chemical or biological agents
Unexploded Ordnance correct answers Explosive ordnance which has been primed, fuzed,
armed, or otherwise prepared
for action, and which has been fired, dropped, launched, projected, or placed in such a manner as
to
constitute a hazard to operations, installations, personnel, or material and remains unexploded
either by
malfunction of design or for any reason.
Explosive Ordnance Disposal Incident: correct answers The suspected or detected presence of
unexploded ordnance, or
damaged explosive ordnance, which constitutes a hazard to operations, installations, personnel,
or material.
Explosive Ordnance Reconnaissance correct answers Act of reconnoitering to determine the
presence of unexploded
ordnance, ascertaining its nature, applying all practicable protective measures for the protection
of
personnel, installations, and equipment and finally reporting essential information to the
authority directing
explosive ordnance disposal operations.
Explosive Ordnance Clearance correct answers Explosive Ordnance Clearance is defined as the
investigation, detection, location, marking, reporting and preparation of protective works
for UXO. It also includes the disposal in place of UXO identified in the EOCA
Identification Guide and theatre specific UXO Annex (approved by EOD Staff Cell), after
risk analysis and positive identification
Explosive Ordnance Disposal correct answers The detection, identification, field evaluation,
render safe, recovery,
evacuation, and disposal of explosive ordnance which has been fired, dropped, launched,
projected, or
,placed in such a manner as to constitute a hazard to operations, installations, personnel, or
material. It also
includes the rendering safe and/or disposal of ordnance which are hazardous or unserviceable
due to damage
or deterioration when the disposal of such ordnance is beyond the capabilities of personnel
normally
assigned the responsibility for routine disposition.
Positive Identification correct answers Positive Identification (PID): Once the ordnance is
identified in the EOCA
Identification Guide, utilizing the ordnance items characteristics, nomenclature, measurements or
any other
positive features.
Disposal Procedure: correct answers That portion of an explosive ordnance disposal procedure
pertaining to the final
disposition of explosive ordnance by qualified EOD and EOCA personnel.
Blow In Place correct answers After an ordnance item has been identified a counter charge can
be placed close to, but not
touching the ordnance to perform a disposal of the item.
Explosive(s) correct answers A substance or mixture of substances which may be made to
undergo a rapid chemical change
without an outside supply of oxygen, with the liberation of large quantities of energy generally
accompanied
by the evolution of hot gases. Explosives are divided into two classes: high explosives and low
explosives,
according to their rate of reaction in normal usage. Certain mixtures of fuels and oxidizers can be
made to
explode and these are considered to be explosives. However, a substance such as a fuel which
requires an
outside source of oxygen, or an oxidizer which requires an outside source of fuel to explode, is
not
considered an explosive.
Military Explosives correct answers a. Manufactured specifically to meet the needs of military
forces.
b. Relatively insensitive to heat, shock, and friction.
c. Maximization of damaging effects, long shelf life and a high-degree of standardization.
Commercial Explosives: correct answers Manufactured to meet the needs for mining,
construction, quarrying, and seismic
exploration.
, High Explosives correct answers a. An explosive which normally detonates rather than
deflagrates or burns; that is, the rate of
advance of the reaction zone into the un-reacted material exceeds the velocity of sound in the un-
reacted material.
b. High explosives are divided into two classes according to their sensitivity to heat and shock:
primary high explosives and secondary high explosives.
c. Primary High Explosives are used as initiating explosives such as; primers, detonators, caps,
relays, or electric matches
d. Secondary High Explosives are used as main charge explosive such as; demolition charges,
bombs, projectiles, and rocket warheads.
Low Explosives correct answers an explosive which deflagrates or burns rather than detonates;
that is the rate of advance if the reaction zone into the un-reacted material is less than the
velocity of sound in the un-reacted material.
a. an explosive may react as a low explosive or as a high explosive, depending on how it is
initiated and confined. unconfined low explosives burn very rapidly but when confined will
detonate.
b. EX: propellants, certain primer mixtures , black powder, photo flash powders, and delay
compositions.
Auxiliary explosives correct answers relays and amplifies the detonation wave to ensure proper
detonation of the main charge
a. less sensitive than initiating explosives.
b. often called a "booster explosive"
c. EX: RDX, PETN, and TNT
initiating explosives correct answers substance,or mixture of substances, used to initiate a
detonation or a burning reaction.
a. extremely sensitive to heat, shock, influence, and electricity
b. used in devices such as primers, detonators, caps, relays, or electric matches.
c. known as "primary explosive"
d. EX: lead azide and lead styphnate
explosive train correct answers a train of combustible and explosive elements arranged in the
order of decreasing sensitivity, inside a fuze, projectile, bomb, etc
1. the function of the explosive train is to accomplish the controlled augumentation of a small
impulse into one of sutible energy to cause the main charge of the ordinance to function.
2. primer. a small sensitive compound found in an explosive train that initiates the explosive
train. can also be used to ignite the propelling charge.
3. fuze explosive train. may consist of a primer, a detonator, a delay, a relay, a lead and a
booster charge, one or more of which may be either omitted or combined.
Explosion correct answers a. This is a rapid and violent release of energy.
b. A chemical reaction or change of state which is affected in an exceedingly short space of time
with the generation of high temperature and generally a large quantity of gas. An explosion
produces
Explosive Ordnance correct answers Bombs and warheads; guided and ballistic missiles;
artillery, mortar, rocket, and
small arms ammunition; all mines; torpedoes; depth charges; demolition charges; pyrotechnics;
clusters and
dispensers: cartridge- and propellant-actuated devices; electroexplosive devices; clandestine and
lEDs; and
all similar or related items or components, explosive in nature, which may cause injury or death
to personnel
or damage to materiel. This definition includes all munitions containing explosives, propellants,
nuclear
fission, fusion, or radiological materials, and chemical or biological agents
Unexploded Ordnance correct answers Explosive ordnance which has been primed, fuzed,
armed, or otherwise prepared
for action, and which has been fired, dropped, launched, projected, or placed in such a manner as
to
constitute a hazard to operations, installations, personnel, or material and remains unexploded
either by
malfunction of design or for any reason.
Explosive Ordnance Disposal Incident: correct answers The suspected or detected presence of
unexploded ordnance, or
damaged explosive ordnance, which constitutes a hazard to operations, installations, personnel,
or material.
Explosive Ordnance Reconnaissance correct answers Act of reconnoitering to determine the
presence of unexploded
ordnance, ascertaining its nature, applying all practicable protective measures for the protection
of
personnel, installations, and equipment and finally reporting essential information to the
authority directing
explosive ordnance disposal operations.
Explosive Ordnance Clearance correct answers Explosive Ordnance Clearance is defined as the
investigation, detection, location, marking, reporting and preparation of protective works
for UXO. It also includes the disposal in place of UXO identified in the EOCA
Identification Guide and theatre specific UXO Annex (approved by EOD Staff Cell), after
risk analysis and positive identification
Explosive Ordnance Disposal correct answers The detection, identification, field evaluation,
render safe, recovery,
evacuation, and disposal of explosive ordnance which has been fired, dropped, launched,
projected, or
,placed in such a manner as to constitute a hazard to operations, installations, personnel, or
material. It also
includes the rendering safe and/or disposal of ordnance which are hazardous or unserviceable
due to damage
or deterioration when the disposal of such ordnance is beyond the capabilities of personnel
normally
assigned the responsibility for routine disposition.
Positive Identification correct answers Positive Identification (PID): Once the ordnance is
identified in the EOCA
Identification Guide, utilizing the ordnance items characteristics, nomenclature, measurements or
any other
positive features.
Disposal Procedure: correct answers That portion of an explosive ordnance disposal procedure
pertaining to the final
disposition of explosive ordnance by qualified EOD and EOCA personnel.
Blow In Place correct answers After an ordnance item has been identified a counter charge can
be placed close to, but not
touching the ordnance to perform a disposal of the item.
Explosive(s) correct answers A substance or mixture of substances which may be made to
undergo a rapid chemical change
without an outside supply of oxygen, with the liberation of large quantities of energy generally
accompanied
by the evolution of hot gases. Explosives are divided into two classes: high explosives and low
explosives,
according to their rate of reaction in normal usage. Certain mixtures of fuels and oxidizers can be
made to
explode and these are considered to be explosives. However, a substance such as a fuel which
requires an
outside source of oxygen, or an oxidizer which requires an outside source of fuel to explode, is
not
considered an explosive.
Military Explosives correct answers a. Manufactured specifically to meet the needs of military
forces.
b. Relatively insensitive to heat, shock, and friction.
c. Maximization of damaging effects, long shelf life and a high-degree of standardization.
Commercial Explosives: correct answers Manufactured to meet the needs for mining,
construction, quarrying, and seismic
exploration.
, High Explosives correct answers a. An explosive which normally detonates rather than
deflagrates or burns; that is, the rate of
advance of the reaction zone into the un-reacted material exceeds the velocity of sound in the un-
reacted material.
b. High explosives are divided into two classes according to their sensitivity to heat and shock:
primary high explosives and secondary high explosives.
c. Primary High Explosives are used as initiating explosives such as; primers, detonators, caps,
relays, or electric matches
d. Secondary High Explosives are used as main charge explosive such as; demolition charges,
bombs, projectiles, and rocket warheads.
Low Explosives correct answers an explosive which deflagrates or burns rather than detonates;
that is the rate of advance if the reaction zone into the un-reacted material is less than the
velocity of sound in the un-reacted material.
a. an explosive may react as a low explosive or as a high explosive, depending on how it is
initiated and confined. unconfined low explosives burn very rapidly but when confined will
detonate.
b. EX: propellants, certain primer mixtures , black powder, photo flash powders, and delay
compositions.
Auxiliary explosives correct answers relays and amplifies the detonation wave to ensure proper
detonation of the main charge
a. less sensitive than initiating explosives.
b. often called a "booster explosive"
c. EX: RDX, PETN, and TNT
initiating explosives correct answers substance,or mixture of substances, used to initiate a
detonation or a burning reaction.
a. extremely sensitive to heat, shock, influence, and electricity
b. used in devices such as primers, detonators, caps, relays, or electric matches.
c. known as "primary explosive"
d. EX: lead azide and lead styphnate
explosive train correct answers a train of combustible and explosive elements arranged in the
order of decreasing sensitivity, inside a fuze, projectile, bomb, etc
1. the function of the explosive train is to accomplish the controlled augumentation of a small
impulse into one of sutible energy to cause the main charge of the ordinance to function.
2. primer. a small sensitive compound found in an explosive train that initiates the explosive
train. can also be used to ignite the propelling charge.
3. fuze explosive train. may consist of a primer, a detonator, a delay, a relay, a lead and a
booster charge, one or more of which may be either omitted or combined.
Explosion correct answers a. This is a rapid and violent release of energy.
b. A chemical reaction or change of state which is affected in an exceedingly short space of time
with the generation of high temperature and generally a large quantity of gas. An explosion
produces