1|Page
CCNA 200-301 PRACTICE EXAM|| ACCURATE AND FREQUENTLY
TESTED QUESTIONS AND 100% CORRECT ANSWERS WITH
RATIONALES|| LATEST AND COMPLETE UPDATE WITH EXPERT VERIFIED
SOLUTIONS
Which command displays the adjacencies of an OSPF router? Show
ip ospf interface command
What command is required to create a password that will be encrypted when it appears
in the show run command?
enable secret <password>
What component is installed on routers to ensure that DHCP packets can be forwarded to
different subnets?
relay agent
What multicast address is used by Open Shortest Path Fist (OSPF) for ALLSPFRouters?
224.0.0.5
What factor determines the number of simultaneous translations that a router will
support?
,2|Page
amount of Dynamic Random Access Memory (DRAM) of the router.
We have an expert-written solution to this problem!
Which TCP/IP protocol provides reliable bi-directional file transfers? file
Transfer Protocol (FTP)
Which protocol option should be selected to encrypt and transmit data between peer
routers with high confidentiality?
Encapsulating Security Payload (ESP) in tunnel mode
What RFC specifies Hot Standby Router Protocol (HSRP)? RFC 2281
What multicast address is used by Open Shortest Path First (OSPF) for ALL DRouters?
224.0.0.6
Which command is used to forward DHCP broadcasts to a DHCP server located in a
remote subnet?
ip helper-address
,3|Page
Which UDP port does Trivial File Transfer Protocol (TFTP) use to communicate with other
hosts?
UDP port 69
Which routing protocols do not include the subnet mask in the route
advertisement?
Classful routing protocols
What is the default area 0 known as? backbone
area
Which two of the four DHCP messages that are exchanged between a host and a DHCP
server are broadcast?
DHCPDISCOVER ad DHCPREQUEST
Which routing protocols include the subnet mask in the route advertisement and support
Variable Length Subnet Masking (VLSM)?
Classless routing protocols
, 4|Page
To what type of interface should you apply an ACL designed to control remote access?
the VTY interface
At which OSI layer does the Network Address Translation (NAT) work? OSI Layer
3 (Network Layer)
What is the term used for the number of devices through which a packet passes when
traveling from a source to a destination?
hop count
Which show command is used to display the status of port security on the specified
interface of a Catalyst switch?
Show port-security [interface interface-id | address] command
Which command is used to interface configuration mode for a loopback interface of
an OSPF router?
interface loopback command
CCNA 200-301 PRACTICE EXAM|| ACCURATE AND FREQUENTLY
TESTED QUESTIONS AND 100% CORRECT ANSWERS WITH
RATIONALES|| LATEST AND COMPLETE UPDATE WITH EXPERT VERIFIED
SOLUTIONS
Which command displays the adjacencies of an OSPF router? Show
ip ospf interface command
What command is required to create a password that will be encrypted when it appears
in the show run command?
enable secret <password>
What component is installed on routers to ensure that DHCP packets can be forwarded to
different subnets?
relay agent
What multicast address is used by Open Shortest Path Fist (OSPF) for ALLSPFRouters?
224.0.0.5
What factor determines the number of simultaneous translations that a router will
support?
,2|Page
amount of Dynamic Random Access Memory (DRAM) of the router.
We have an expert-written solution to this problem!
Which TCP/IP protocol provides reliable bi-directional file transfers? file
Transfer Protocol (FTP)
Which protocol option should be selected to encrypt and transmit data between peer
routers with high confidentiality?
Encapsulating Security Payload (ESP) in tunnel mode
What RFC specifies Hot Standby Router Protocol (HSRP)? RFC 2281
What multicast address is used by Open Shortest Path First (OSPF) for ALL DRouters?
224.0.0.6
Which command is used to forward DHCP broadcasts to a DHCP server located in a
remote subnet?
ip helper-address
,3|Page
Which UDP port does Trivial File Transfer Protocol (TFTP) use to communicate with other
hosts?
UDP port 69
Which routing protocols do not include the subnet mask in the route
advertisement?
Classful routing protocols
What is the default area 0 known as? backbone
area
Which two of the four DHCP messages that are exchanged between a host and a DHCP
server are broadcast?
DHCPDISCOVER ad DHCPREQUEST
Which routing protocols include the subnet mask in the route advertisement and support
Variable Length Subnet Masking (VLSM)?
Classless routing protocols
, 4|Page
To what type of interface should you apply an ACL designed to control remote access?
the VTY interface
At which OSI layer does the Network Address Translation (NAT) work? OSI Layer
3 (Network Layer)
What is the term used for the number of devices through which a packet passes when
traveling from a source to a destination?
hop count
Which show command is used to display the status of port security on the specified
interface of a Catalyst switch?
Show port-security [interface interface-id | address] command
Which command is used to interface configuration mode for a loopback interface of
an OSPF router?
interface loopback command
