BCTC INDUSTRIAL MAINTENANCE
TECHNOLOGY AMTEC NOCTI
MECHATRONIC REVIEW EXAMINATION
TEST 2026 FULL QUESTIONS AND
ANSWERS GRADED A+
⩥ A _________ fire extinguisher should be used on an electrical fire.
Answer: Class C
⩥ What does OSHA stand for? Answer: Occupational Safety & Health
Administration
⩥ This type of drawing represents a three-dimensional object using
several two-dimensional views of the object. Answer: Orthographic
⩥ What are linear dimensions usually expressed in? Answer: Decimal or
Fractional Units
⩥ What does a filled triangle represent in a fluid power diagram?
Answer: Hydraulic Flow
⩥ What can happen if bolts and nuts are not properly torqued? Answer:
They wear out quickly and can cause failure.
,⩥ What safety practice is used to prevent equipment from being
energized? Answer: Lockout/Tagout
⩥ A Safety Data Sheet (SDS) provides information about first aid
measures, stability and reactivity, and _____? Answer: Handling and
Storage
⩥ Which of the following is not true of a title block? Answer: Format is
the same from company to company.
⩥ A NFPA 70E is a regulation that provides guidelines and details for
___________? Answer: Electrical safety
⩥ GFCI devices are used for what purpose? Answer: To prevent a
person from being electrocuted.
⩥ A person with serious electrical injury should be moved only when
_______. Answer: They are in immediate danger
⩥ What must be provided by chemical manufacturers, distributors, and
importers to anyone who will work with these potentially dangerous
materials? Answer: Safety Data Sheet (SDS).
, ⩥ You come across a fellow employee who is being electrocuted by
becoming attached to a live electrical circuit, what is the first thing you
should do? Answer: Shut off the circuit.
⩥ What would slippery floors and cluttered walkways be considered in
the workplace? Answer: Physical hazards.
⩥ What tool is used to measure the turning force when tightening a
fastener? Answer: Torque Wrench
⩥ When working on an electrical, fluid power, or mechanical system a
____ procedure should be performed to lock out the energy. Answer:
LOTO
⩥ The section of a technical report which summarizes the report's
contents is called what? Answer: Abstract
⩥ What does a thick line represent in a schematic diagram? Answer:
Current flow
⩥ A switch is an example of a _____ into a motor control circuit.
Answer: input
TECHNOLOGY AMTEC NOCTI
MECHATRONIC REVIEW EXAMINATION
TEST 2026 FULL QUESTIONS AND
ANSWERS GRADED A+
⩥ A _________ fire extinguisher should be used on an electrical fire.
Answer: Class C
⩥ What does OSHA stand for? Answer: Occupational Safety & Health
Administration
⩥ This type of drawing represents a three-dimensional object using
several two-dimensional views of the object. Answer: Orthographic
⩥ What are linear dimensions usually expressed in? Answer: Decimal or
Fractional Units
⩥ What does a filled triangle represent in a fluid power diagram?
Answer: Hydraulic Flow
⩥ What can happen if bolts and nuts are not properly torqued? Answer:
They wear out quickly and can cause failure.
,⩥ What safety practice is used to prevent equipment from being
energized? Answer: Lockout/Tagout
⩥ A Safety Data Sheet (SDS) provides information about first aid
measures, stability and reactivity, and _____? Answer: Handling and
Storage
⩥ Which of the following is not true of a title block? Answer: Format is
the same from company to company.
⩥ A NFPA 70E is a regulation that provides guidelines and details for
___________? Answer: Electrical safety
⩥ GFCI devices are used for what purpose? Answer: To prevent a
person from being electrocuted.
⩥ A person with serious electrical injury should be moved only when
_______. Answer: They are in immediate danger
⩥ What must be provided by chemical manufacturers, distributors, and
importers to anyone who will work with these potentially dangerous
materials? Answer: Safety Data Sheet (SDS).
, ⩥ You come across a fellow employee who is being electrocuted by
becoming attached to a live electrical circuit, what is the first thing you
should do? Answer: Shut off the circuit.
⩥ What would slippery floors and cluttered walkways be considered in
the workplace? Answer: Physical hazards.
⩥ What tool is used to measure the turning force when tightening a
fastener? Answer: Torque Wrench
⩥ When working on an electrical, fluid power, or mechanical system a
____ procedure should be performed to lock out the energy. Answer:
LOTO
⩥ The section of a technical report which summarizes the report's
contents is called what? Answer: Abstract
⩥ What does a thick line represent in a schematic diagram? Answer:
Current flow
⩥ A switch is an example of a _____ into a motor control circuit.
Answer: input
