New Jersey Elevator Inspector
Examination Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. What is the primary purpose of an elevator safety inspection?
A. Ensure the elevator operates quickly
B. Ensure the elevator is aesthetically pleasing
C. Ensure compliance with safety codes and prevent accidents
D. Ensure passenger comfort
C. Ensure compliance with safety codes and prevent accidents
Rationale: Safety inspections focus on compliance with codes and
preventing hazards, not comfort or aesthetics.
2. Which code governs the construction and safety of elevators in New
Jersey?
A. NFPA 70
B. ASME A17.1 / CSA B44
C. OSHA 1910
D. IBC 2018
B. ASME A17.1 / CSA B44
Rationale: ASME A17.1/CSA B44 is the standard for elevator safety
codes in the U.S., including New Jersey.
3. How often must traction elevators undergo a full safety inspection in
New Jersey?
A. Every 6 months
B. Annually
C. Every 5 years
, D. Monthly
B. Annually
Rationale: Annual inspections are required for traction elevators to
ensure ongoing compliance and safety.
4. Which component of an elevator is most critical for preventing
uncontrolled descent?
A. Hoistway lighting
B. Counterweights
C. Safety brake / governor
D. Elevator cab interior
C. Safety brake / governor
Rationale: The governor triggers the safety brake if the elevator
moves too fast, preventing free fall.
5. When inspecting hydraulic elevators, which of the following is a key
safety concern?
A. Cable tension
B. Hydraulic fluid leaks
C. Door alignment
D. Lighting in the hoistway
B. Hydraulic fluid leaks
Rationale: Leaks can compromise the hydraulic system, posing
serious safety risks.
6. What is the main function of elevator door interlocks?
A. Speed up door operation
B. Prevent the elevator from moving when doors are open
C. Reduce energy usage
D. Reduce noise
B. Prevent the elevator from moving when doors are open
Rationale: Interlocks prevent operation of the elevator unless doors
are fully closed, protecting passengers.
7. How should emergency alarms in an elevator be tested during
inspection?
A. Only visually
B. By sounding the alarm and verifying it is audible and connected
C. By pressing it once
, D. Not required
B. By sounding the alarm and verifying it is audible and connected
Rationale: The alarm must be operational and connected to
emergency response systems.
8. What is the maximum allowable speed for a standard passenger
elevator according to ASME A17.1?
A. 100 ft/min
B. 200 ft/min
C. 350 ft/min
D. 500 ft/min
C. 350 ft/min
Rationale: Standard passenger elevators are limited to speeds under
350 ft/min unless otherwise specified.
9. During an inspection, an elevator’s emergency stop works, but the
alarm does not. What should the inspector do?
A. Approve the elevator
B. Fail the elevator and require repair before operation
C. Ignore the alarm
D. Report it as minor
B. Fail the elevator and require repair before operation
Rationale: All safety features must function properly for certification;
alarms are critical for emergency response.
10. Which of the following is required in all elevator hoistways?
A. Decorative paneling
B. Lighting and proper clearance
C. Carpeting
D. A mirror
B. Lighting and proper clearance
Rationale: Proper illumination and clearance are required for safe
operation and inspection.
11. What type of elevator uses ropes and a counterweight to lift the
cab?
A. Hydraulic
B. Traction
C. Pneumatic
Examination Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. What is the primary purpose of an elevator safety inspection?
A. Ensure the elevator operates quickly
B. Ensure the elevator is aesthetically pleasing
C. Ensure compliance with safety codes and prevent accidents
D. Ensure passenger comfort
C. Ensure compliance with safety codes and prevent accidents
Rationale: Safety inspections focus on compliance with codes and
preventing hazards, not comfort or aesthetics.
2. Which code governs the construction and safety of elevators in New
Jersey?
A. NFPA 70
B. ASME A17.1 / CSA B44
C. OSHA 1910
D. IBC 2018
B. ASME A17.1 / CSA B44
Rationale: ASME A17.1/CSA B44 is the standard for elevator safety
codes in the U.S., including New Jersey.
3. How often must traction elevators undergo a full safety inspection in
New Jersey?
A. Every 6 months
B. Annually
C. Every 5 years
, D. Monthly
B. Annually
Rationale: Annual inspections are required for traction elevators to
ensure ongoing compliance and safety.
4. Which component of an elevator is most critical for preventing
uncontrolled descent?
A. Hoistway lighting
B. Counterweights
C. Safety brake / governor
D. Elevator cab interior
C. Safety brake / governor
Rationale: The governor triggers the safety brake if the elevator
moves too fast, preventing free fall.
5. When inspecting hydraulic elevators, which of the following is a key
safety concern?
A. Cable tension
B. Hydraulic fluid leaks
C. Door alignment
D. Lighting in the hoistway
B. Hydraulic fluid leaks
Rationale: Leaks can compromise the hydraulic system, posing
serious safety risks.
6. What is the main function of elevator door interlocks?
A. Speed up door operation
B. Prevent the elevator from moving when doors are open
C. Reduce energy usage
D. Reduce noise
B. Prevent the elevator from moving when doors are open
Rationale: Interlocks prevent operation of the elevator unless doors
are fully closed, protecting passengers.
7. How should emergency alarms in an elevator be tested during
inspection?
A. Only visually
B. By sounding the alarm and verifying it is audible and connected
C. By pressing it once
, D. Not required
B. By sounding the alarm and verifying it is audible and connected
Rationale: The alarm must be operational and connected to
emergency response systems.
8. What is the maximum allowable speed for a standard passenger
elevator according to ASME A17.1?
A. 100 ft/min
B. 200 ft/min
C. 350 ft/min
D. 500 ft/min
C. 350 ft/min
Rationale: Standard passenger elevators are limited to speeds under
350 ft/min unless otherwise specified.
9. During an inspection, an elevator’s emergency stop works, but the
alarm does not. What should the inspector do?
A. Approve the elevator
B. Fail the elevator and require repair before operation
C. Ignore the alarm
D. Report it as minor
B. Fail the elevator and require repair before operation
Rationale: All safety features must function properly for certification;
alarms are critical for emergency response.
10. Which of the following is required in all elevator hoistways?
A. Decorative paneling
B. Lighting and proper clearance
C. Carpeting
D. A mirror
B. Lighting and proper clearance
Rationale: Proper illumination and clearance are required for safe
operation and inspection.
11. What type of elevator uses ropes and a counterweight to lift the
cab?
A. Hydraulic
B. Traction
C. Pneumatic
