S95 Certificate of fitness (Supervisión of Fire Alarm System)
Exam | Most Recent Exam 2026 | Actual Comprehensive Real
Exam Questions With 100% Correct Answers | Verified
Answers | Already Graded A+ | Guaranteed Success!! |
Newest Exam | Just Released!!
S-95
ANSWERS: Fire alarm system without voice communication system
and not requiring an FLSD/F-80/F-53
any approved fire alarm system without voice communication system
must be under supervision of an
ANSWERS: S-95 Certificate of Fitness holder.
,A fire alarm system may include but not limit to one/some of the
following systems:
ANSWERS:
1. Standpipe fire pump 2. Sprinkler booster fire pump 3. Standpipe(limited
service fire pump) This book is provided to the public for free by the
FDNY. 13 4. Other (specify) 5. Emergency voice/alarm communication
system 6. Fire Department
communication system 7. Carbon monoxide alarms and detectors 8.
Automatic sprinkler systems 9. Alternative automatic fire-extinguishing
system 10. Automatic fire alarm systems 11. Manual fire alarm systems
12. Manual and automatic fire
alarm systems 13. Emergency alarm systems (gas detection system) 14.
Smoke control systems 15. Fire command center 16. Post-fire smoke
purge systems 17. Sub-systems (Range hood, halon and FM200 etc.)
18. Auxiliary Radio
Communication System (ARCS)
Duties can be performed s95
ANSWERS: Visual inspection of smoke detectors and Visual inspection of
other fire alarm system components
Fire alarm systems are required in many premises as part of a fire
protection system. The new Fire Code has expanded the requirements for
fire alarm systems which include but are not limited to the following
buildings:
ANSWERS: OFFICE BUILDINGS • SHELTERS • HOSPITALS • MARINAS •
COMMERCIAL •
,HOTELS • MOTELS • SCHOOLS • APARTMENT BUILDINGS which may be
high- rise or low-rise, or as specified in New York City Building Code
section 309.1.
THE PRIMARY PURPOSE OF FIRE ALARM SYSTEMS WITHIN PROTECTED
PREMISES IS
ANSWERS: TO WARN BUILDING OCCUPANTS AND TRANSMIT
SIGNALS INDICATING A FIRE CONDITION TO THE FIRE
DEPARTMENT VIA AN FDNY APPROVED CENTRAL STATION
COMPANY
Fire alarm systems are required in various types of occupancies
hotels, shelters, hospitals, office buildings and mercantile occupancies.
THREE TYPES OF SIGNALS INITIATED BY FACP
ANSWERS: 1 Fire Alarm Signal 2 Supervisory Signals 3 Trouble Signals
When a fire signal is generated, the FACP activates it does what?
ANSWERS: activates the building audible and visual devices connected
to the fire alarm (i.e. horn/strobes), sends a signal to an FDNY
approved central station, and actuates control of certain building
functions.
, monitor and process all fire alarm signals before any other signals,
regardless of the order in which they are received. When they receive
fire alarm signals,
operators at the central station re-transmit those signals to the Fire
Department. WHO AM I?
ANSWERS: Central station operators
A signal is deemed to be received at the time it is processed by the
ANSWERS: Automation Software
EVERY fire alarm signal must be re-transmitted immediately to the FDNY
as a fire alarm signal even if it is automatically restored by the premise
fire alarm system. There are NO EXCEPTIONS. True or False
ANSWERS: True
Alarm signals transmitted to the Fire Department shall indicate the type of
alarm received (e.g., automatic, valve, manual or carbon monoxide). True
or False
ANSWERS: True
Supervisory signals are generated from initiating devices such as:
ANSWERS:
1. Valve supervisory switch on a sprinkler system 2. High/Low water
level switch on a gravity tank feeding a sprinkler system 3. Low air
pressure switch from a dry pipe sprinkler system 4. Fire pump
Exam | Most Recent Exam 2026 | Actual Comprehensive Real
Exam Questions With 100% Correct Answers | Verified
Answers | Already Graded A+ | Guaranteed Success!! |
Newest Exam | Just Released!!
S-95
ANSWERS: Fire alarm system without voice communication system
and not requiring an FLSD/F-80/F-53
any approved fire alarm system without voice communication system
must be under supervision of an
ANSWERS: S-95 Certificate of Fitness holder.
,A fire alarm system may include but not limit to one/some of the
following systems:
ANSWERS:
1. Standpipe fire pump 2. Sprinkler booster fire pump 3. Standpipe(limited
service fire pump) This book is provided to the public for free by the
FDNY. 13 4. Other (specify) 5. Emergency voice/alarm communication
system 6. Fire Department
communication system 7. Carbon monoxide alarms and detectors 8.
Automatic sprinkler systems 9. Alternative automatic fire-extinguishing
system 10. Automatic fire alarm systems 11. Manual fire alarm systems
12. Manual and automatic fire
alarm systems 13. Emergency alarm systems (gas detection system) 14.
Smoke control systems 15. Fire command center 16. Post-fire smoke
purge systems 17. Sub-systems (Range hood, halon and FM200 etc.)
18. Auxiliary Radio
Communication System (ARCS)
Duties can be performed s95
ANSWERS: Visual inspection of smoke detectors and Visual inspection of
other fire alarm system components
Fire alarm systems are required in many premises as part of a fire
protection system. The new Fire Code has expanded the requirements for
fire alarm systems which include but are not limited to the following
buildings:
ANSWERS: OFFICE BUILDINGS • SHELTERS • HOSPITALS • MARINAS •
COMMERCIAL •
,HOTELS • MOTELS • SCHOOLS • APARTMENT BUILDINGS which may be
high- rise or low-rise, or as specified in New York City Building Code
section 309.1.
THE PRIMARY PURPOSE OF FIRE ALARM SYSTEMS WITHIN PROTECTED
PREMISES IS
ANSWERS: TO WARN BUILDING OCCUPANTS AND TRANSMIT
SIGNALS INDICATING A FIRE CONDITION TO THE FIRE
DEPARTMENT VIA AN FDNY APPROVED CENTRAL STATION
COMPANY
Fire alarm systems are required in various types of occupancies
hotels, shelters, hospitals, office buildings and mercantile occupancies.
THREE TYPES OF SIGNALS INITIATED BY FACP
ANSWERS: 1 Fire Alarm Signal 2 Supervisory Signals 3 Trouble Signals
When a fire signal is generated, the FACP activates it does what?
ANSWERS: activates the building audible and visual devices connected
to the fire alarm (i.e. horn/strobes), sends a signal to an FDNY
approved central station, and actuates control of certain building
functions.
, monitor and process all fire alarm signals before any other signals,
regardless of the order in which they are received. When they receive
fire alarm signals,
operators at the central station re-transmit those signals to the Fire
Department. WHO AM I?
ANSWERS: Central station operators
A signal is deemed to be received at the time it is processed by the
ANSWERS: Automation Software
EVERY fire alarm signal must be re-transmitted immediately to the FDNY
as a fire alarm signal even if it is automatically restored by the premise
fire alarm system. There are NO EXCEPTIONS. True or False
ANSWERS: True
Alarm signals transmitted to the Fire Department shall indicate the type of
alarm received (e.g., automatic, valve, manual or carbon monoxide). True
or False
ANSWERS: True
Supervisory signals are generated from initiating devices such as:
ANSWERS:
1. Valve supervisory switch on a sprinkler system 2. High/Low water
level switch on a gravity tank feeding a sprinkler system 3. Low air
pressure switch from a dry pipe sprinkler system 4. Fire pump
