Home Inspection-Roofing Exam Questions and Answers |New Update with
100% Verified Answers
Roofing SQ Area means how many Sq Ft or Area 100
In most Jurisdiction, No of Roofing layers allowed Two
Roofing Pitch is Defined by ratio of what Rise / Run
A roof with a pitch or slope of 3/12 would be termed a ____-slope roof. Low
InterNACHl's Standards of Practice require that all roofs be walked. (True or False) False
An inspector is NOT required to report on the TV antennae.
True or False True
T/F: The inspector is not required to report on tree limbs overhanging the roof surface, since
they are not part of the structure. False
A flat roof would be one with a pitch or slope of less than 2/12
A standard gable roof has how many plane
1. One
2. Two
3. Four 2. Two
A roof with four planes meeting at the ridge is termed a roof
a. Hip
,b. Gable
c. Gambrel
d. flat a. Hip
Standard 3-tab asphalt shingles generally last _____ years 15 to 25
T/F: Slate roofs can last forever. False
The proper slope for guttering is ________-inch per foot. 1/16
Gutters should be installed by :
1. screwing or spiking them into the soffit
2. screwing or spiking them into the fascia
3. screwing or spiking them through the fascia and into the rafter tails 3. screwing or spiking
them through the fascia and into the rafter tails
T/F: All homes are required to have gutters installed. False
T/F: Rusting steel gutters are a cosmetic issue and need not be reported False
Which of the following guttering issues need NOT be reported?
1. the presence of leaf guards
2. gutters that slope up from the downspouts
3. missing downspouts 1. the presence of leaf guards
Which of the following is NOT a guttering material?
1. steel
, 2. brass
3. plastic
4. copper
5. aluminum 2. brass
T/F: The inspector should report on any debris buildup in the gutters. True
T/F: The inspector should inspect all visible downspout terminations. True
Which of the following would NOT cause rafter spread?
1. lack of collar ties
2 over-spanned rafters
3. adequate knee walls
4. too many layers of roof coverings 3. adequate knee walls
Deflection of the ridge beam is called
1. rafter spread
2. hogback or horseback
3. saddleback or swayback 3. saddleback or swayback.
A "step" in the ridge may indicate
1. structural problems
2. rafter spread
3. a lack of purlins 1. structural problems.
A gap between the wall and soffit may indicate
1. moisture in the soffit
100% Verified Answers
Roofing SQ Area means how many Sq Ft or Area 100
In most Jurisdiction, No of Roofing layers allowed Two
Roofing Pitch is Defined by ratio of what Rise / Run
A roof with a pitch or slope of 3/12 would be termed a ____-slope roof. Low
InterNACHl's Standards of Practice require that all roofs be walked. (True or False) False
An inspector is NOT required to report on the TV antennae.
True or False True
T/F: The inspector is not required to report on tree limbs overhanging the roof surface, since
they are not part of the structure. False
A flat roof would be one with a pitch or slope of less than 2/12
A standard gable roof has how many plane
1. One
2. Two
3. Four 2. Two
A roof with four planes meeting at the ridge is termed a roof
a. Hip
,b. Gable
c. Gambrel
d. flat a. Hip
Standard 3-tab asphalt shingles generally last _____ years 15 to 25
T/F: Slate roofs can last forever. False
The proper slope for guttering is ________-inch per foot. 1/16
Gutters should be installed by :
1. screwing or spiking them into the soffit
2. screwing or spiking them into the fascia
3. screwing or spiking them through the fascia and into the rafter tails 3. screwing or spiking
them through the fascia and into the rafter tails
T/F: All homes are required to have gutters installed. False
T/F: Rusting steel gutters are a cosmetic issue and need not be reported False
Which of the following guttering issues need NOT be reported?
1. the presence of leaf guards
2. gutters that slope up from the downspouts
3. missing downspouts 1. the presence of leaf guards
Which of the following is NOT a guttering material?
1. steel
, 2. brass
3. plastic
4. copper
5. aluminum 2. brass
T/F: The inspector should report on any debris buildup in the gutters. True
T/F: The inspector should inspect all visible downspout terminations. True
Which of the following would NOT cause rafter spread?
1. lack of collar ties
2 over-spanned rafters
3. adequate knee walls
4. too many layers of roof coverings 3. adequate knee walls
Deflection of the ridge beam is called
1. rafter spread
2. hogback or horseback
3. saddleback or swayback 3. saddleback or swayback.
A "step" in the ridge may indicate
1. structural problems
2. rafter spread
3. a lack of purlins 1. structural problems.
A gap between the wall and soffit may indicate
1. moisture in the soffit
