Home Inspection Heating Exam Questions and Answers |New Update with
100% Verified Answers
When inspecting the heating equipment, the inspector is not required to _____.
operate heating systems when conditions may cause equipment damage
open readily openable access panels provided by the manufacturer
observe automatic safety controls
operate the system using normal operating controls Operate heating systems when
conditions may cause equipment damage
What should the home inspector do if he or she finds a cracked heat exchanger?
report it as a major repair
turn off the furnace immediately
sell the customer a new furnace
tell the customer it will probably last 5 more years Report it as a major repair
Which of the following is not a part of the heating inspection?
heating equipment
humidifiers
combustion product and disposal system
old steam boilers Humidifiers
When should the home inspector have the customer stand back for safety's sake?
when the thermostat is manipulated
when the venting is inspected
when the furnace or boiler is fired
when the safety switch is tested When the furnace or boiler is fired
, What should be a concern when inspecting electronic air filters?
harmful filth
electrical shock
explosion
cuts from sheet metal Electrical shot
If a heating system appears to be improperly vented after the home inspector fires it, the
inspector should _____.
ask the owner to inspect the venting
turn off the system promptly
repair the venting issue and proceed
investigate the cause of improper venting Turn off the system promptly
Why should a furnace not be operated?
too much aluminum foil present to properly inspect it
a masonry chimney
improper venting
rusted ductwork Improper venting
What is overshooting?
a condition where different zones of a house are controlled by different thermostats
a condition where a house is heated higher than the thermostat is set for
a condition where the thermostat is not level, causing incorrect temperature readings
a condition where the heating system turns on and off too frequently A condition where a
house is heated higher than the thermostat is set for
What type of central heating system is always required to have a remote safety switch?
electric furnace
100% Verified Answers
When inspecting the heating equipment, the inspector is not required to _____.
operate heating systems when conditions may cause equipment damage
open readily openable access panels provided by the manufacturer
observe automatic safety controls
operate the system using normal operating controls Operate heating systems when
conditions may cause equipment damage
What should the home inspector do if he or she finds a cracked heat exchanger?
report it as a major repair
turn off the furnace immediately
sell the customer a new furnace
tell the customer it will probably last 5 more years Report it as a major repair
Which of the following is not a part of the heating inspection?
heating equipment
humidifiers
combustion product and disposal system
old steam boilers Humidifiers
When should the home inspector have the customer stand back for safety's sake?
when the thermostat is manipulated
when the venting is inspected
when the furnace or boiler is fired
when the safety switch is tested When the furnace or boiler is fired
, What should be a concern when inspecting electronic air filters?
harmful filth
electrical shock
explosion
cuts from sheet metal Electrical shot
If a heating system appears to be improperly vented after the home inspector fires it, the
inspector should _____.
ask the owner to inspect the venting
turn off the system promptly
repair the venting issue and proceed
investigate the cause of improper venting Turn off the system promptly
Why should a furnace not be operated?
too much aluminum foil present to properly inspect it
a masonry chimney
improper venting
rusted ductwork Improper venting
What is overshooting?
a condition where different zones of a house are controlled by different thermostats
a condition where a house is heated higher than the thermostat is set for
a condition where the thermostat is not level, causing incorrect temperature readings
a condition where the heating system turns on and off too frequently A condition where a
house is heated higher than the thermostat is set for
What type of central heating system is always required to have a remote safety switch?
electric furnace
