1|Page
BICSI Practice Test-RETAKE|
Comprehensive Questions With Answers
The color code for single mode optical fiber is ________ - correct-answer -Yellow
The color code for multimode optical fiber with a 50micron core diameter (laser
optimized) is - correct-answer -Aqua
The ______ can terminate from 6 - 72 fibers in a single ferrule - correct-answer -
MPO
The consolidation point (CP) should be limited to serving a maximum of ________
equipment outlet spaces - correct-answer -12
The consolidation point (CP) should be at least ______ feet from the TR - correct-
answer -50
,2|Page
You should look in ANSI/TIA - ______ if you needed information on the labeling
standard. - correct-answer -606 A-38,39
ANSI/TIA - ______ says that structural metal should be tested to verify its
conductivity to earth. - correct-answer -607 A-38,39
NEC ______ says that communication wires and cables shall be listed. - correct-
answer -800 A-38,39
Generic Telecommunications Cabling for Customer Premises (where to find) -
correct-answer -568.0 A-38,39
Broadband coaxial cabling and components standards (where to find) - correct-
answer -568.4 A-38,39
______ is a private, not-for-profit organization that serves as the administrator
and coordinator of the United States' private sector voluntary standardization
system - correct-answer -ANSI
, 3|Page
The telecommunications service entrance to the building is called the ________ -
correct-answer -Entrance Facility (EF)
The color field for the "Network" termination field is _______ - correct-answer -
Green
The color field for the "interbuilding backbone cable" termination field is
_________ - correct-answer -brown (over white)
The connection between the Horizontal cable and the backbone cable is called the
______ - correct-answer -HC (FD)
A TE can serve a maximum of ________ - correct-answer -3600 feet squared
The 2 different "types of backbone cabling are _______ and ______ - correct-
answer -Intrabuilding
Interbuilding
BICSI Practice Test-RETAKE|
Comprehensive Questions With Answers
The color code for single mode optical fiber is ________ - correct-answer -Yellow
The color code for multimode optical fiber with a 50micron core diameter (laser
optimized) is - correct-answer -Aqua
The ______ can terminate from 6 - 72 fibers in a single ferrule - correct-answer -
MPO
The consolidation point (CP) should be limited to serving a maximum of ________
equipment outlet spaces - correct-answer -12
The consolidation point (CP) should be at least ______ feet from the TR - correct-
answer -50
,2|Page
You should look in ANSI/TIA - ______ if you needed information on the labeling
standard. - correct-answer -606 A-38,39
ANSI/TIA - ______ says that structural metal should be tested to verify its
conductivity to earth. - correct-answer -607 A-38,39
NEC ______ says that communication wires and cables shall be listed. - correct-
answer -800 A-38,39
Generic Telecommunications Cabling for Customer Premises (where to find) -
correct-answer -568.0 A-38,39
Broadband coaxial cabling and components standards (where to find) - correct-
answer -568.4 A-38,39
______ is a private, not-for-profit organization that serves as the administrator
and coordinator of the United States' private sector voluntary standardization
system - correct-answer -ANSI
, 3|Page
The telecommunications service entrance to the building is called the ________ -
correct-answer -Entrance Facility (EF)
The color field for the "Network" termination field is _______ - correct-answer -
Green
The color field for the "interbuilding backbone cable" termination field is
_________ - correct-answer -brown (over white)
The connection between the Horizontal cable and the backbone cable is called the
______ - correct-answer -HC (FD)
A TE can serve a maximum of ________ - correct-answer -3600 feet squared
The 2 different "types of backbone cabling are _______ and ______ - correct-
answer -Intrabuilding
Interbuilding
