CCNP Exam Questions with Correct Answers |New Update 100% Verified By Experts
public API resource:
username and password in an encoded string:
API-dependent secret:
authorization through identity provider: secure vault
HTTP basic authentication
OAuth
token-based authentication
When a wired client connects to an edge switch in an SDA fabric, which component decides
whether the client has access to the network?
A. control-plane node
B. Identity Service Engine
C. RADIUS server
D. edge node B. Identity Service Engine
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point.
Assuming that all BGP neighbor relationships have been formed and that the attributes have
not been changed on any of the routers, which configuration accomplish task?
A. R4(config-router)#bgp default local-preference 200
B. R3(config-router)#neighbor 10.1.1.1 weight 200
C. R3(config-router)#bgp default local-preference 200
D. R4(config-router)#neighbor 10.2.2.2 weight 200 A. R4(config-router)#bgp default local-
preference 200
Which protocol infers that a YANG data model is being used?
A. SNMP
B. REST
,C. RESTCONF
D. NX-API C. NETCONF
Which configuration restricts the amount of SSH that a router accepts 100 kbps?
A. Option A
B. Option B
C. Option C
D. Option D C. Option C
What NTP stratum level is a server that is connected directly to an authoritative time source?
A. Stratum 0
B. Stratum 1
C. Stratum 14
D. Stratum 15 B. Stratum 1
How does QoS traffic shaping alleviate network congestion?
A. It drops packets when traffic exceeds a certain bitrate.
B. It buffers and queue packets above the committed rate.
C. It fragments large packets and queues them for delivery.
D. It drops packets randomly from lower priority queues. B. It buffers and queue packer
An engineer is describing QoS to a client. Which two facts apply to traffic policing? (Choose
two)
A. Policing adapts to network congestion by queuing excess traffic
B. Policing should be performed as close to the destination as possible
C. Policing drops traffic that exceeds the defined rate
D. Policing typically delays the traffic, rather than drops it
, E. Policing should be performed as close to the source as possible C. Policing drops traffic
that exceeds the defined rate
E. Policing should be performed as close to the source as possible
What mechanism does PIM use to forward multicast traffic?
A. PIM sparse mode uses a pull model to deliver multicast traffic
B. PIM dense mode uses a pull model to deliver multicast traffic
C. PIM sparse mode uses receivers to register with the RP
D. PIM sparse mode uses a flood and prune model to deliver multicast traffic A. PIM sparse
mode uses a pull model to deliver multicast traffic
Which two namespaces does the LISP network architecture and protocol use? (Choose two)
A. TLOC
B. RLOC
C. DNS
D. VTEP
E. EID B. RLOC
E. EID
Which First Hop Redundancy Protocol should be used to meet a design requirements for more
efficient default bandwidth usage across multiple devices?
A. GLBP
B. LCAP
C. HSRP
D. VRRP A. GLBP
A network engineer is configuring OSPF between router R1 and router R2. The engineer must
ensure that a DR/BDR election does not occur on the Gigabit Ethernet interfaces in area 0.
public API resource:
username and password in an encoded string:
API-dependent secret:
authorization through identity provider: secure vault
HTTP basic authentication
OAuth
token-based authentication
When a wired client connects to an edge switch in an SDA fabric, which component decides
whether the client has access to the network?
A. control-plane node
B. Identity Service Engine
C. RADIUS server
D. edge node B. Identity Service Engine
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point.
Assuming that all BGP neighbor relationships have been formed and that the attributes have
not been changed on any of the routers, which configuration accomplish task?
A. R4(config-router)#bgp default local-preference 200
B. R3(config-router)#neighbor 10.1.1.1 weight 200
C. R3(config-router)#bgp default local-preference 200
D. R4(config-router)#neighbor 10.2.2.2 weight 200 A. R4(config-router)#bgp default local-
preference 200
Which protocol infers that a YANG data model is being used?
A. SNMP
B. REST
,C. RESTCONF
D. NX-API C. NETCONF
Which configuration restricts the amount of SSH that a router accepts 100 kbps?
A. Option A
B. Option B
C. Option C
D. Option D C. Option C
What NTP stratum level is a server that is connected directly to an authoritative time source?
A. Stratum 0
B. Stratum 1
C. Stratum 14
D. Stratum 15 B. Stratum 1
How does QoS traffic shaping alleviate network congestion?
A. It drops packets when traffic exceeds a certain bitrate.
B. It buffers and queue packets above the committed rate.
C. It fragments large packets and queues them for delivery.
D. It drops packets randomly from lower priority queues. B. It buffers and queue packer
An engineer is describing QoS to a client. Which two facts apply to traffic policing? (Choose
two)
A. Policing adapts to network congestion by queuing excess traffic
B. Policing should be performed as close to the destination as possible
C. Policing drops traffic that exceeds the defined rate
D. Policing typically delays the traffic, rather than drops it
, E. Policing should be performed as close to the source as possible C. Policing drops traffic
that exceeds the defined rate
E. Policing should be performed as close to the source as possible
What mechanism does PIM use to forward multicast traffic?
A. PIM sparse mode uses a pull model to deliver multicast traffic
B. PIM dense mode uses a pull model to deliver multicast traffic
C. PIM sparse mode uses receivers to register with the RP
D. PIM sparse mode uses a flood and prune model to deliver multicast traffic A. PIM sparse
mode uses a pull model to deliver multicast traffic
Which two namespaces does the LISP network architecture and protocol use? (Choose two)
A. TLOC
B. RLOC
C. DNS
D. VTEP
E. EID B. RLOC
E. EID
Which First Hop Redundancy Protocol should be used to meet a design requirements for more
efficient default bandwidth usage across multiple devices?
A. GLBP
B. LCAP
C. HSRP
D. VRRP A. GLBP
A network engineer is configuring OSPF between router R1 and router R2. The engineer must
ensure that a DR/BDR election does not occur on the Gigabit Ethernet interfaces in area 0.
