AFAB 110 Final EXAM, Most Recent Exam 2026
Actual Comprehensive Real Exam Questions And
Verified Answers ( 100% Correct Answers)
Already Graded A+ | Guaranteed Success |
Newest EXAM | Just Released!!
The broken-out section requires another type of line from the
alphabet of lines
to help show where the removed portion was broken off in a
"jagged" sort of
way. This is the _____________ line. - ANSWER-
Short break
When a(n) _____________ section is created, it can be overlaid
on the view or short break lines can be used on each side of
the view to separate it from the other visible lines. - ANSWER-
Revolved
Type of section wherein the section view is probably located
out of projection
with the other regular or auxiliary views is a(n)
___________ section. -
ANSWER-
Removed
There is a conventional practice that allows the drafter to leave
a feature unhatched, even though the cutting-plane line passes
,through it. Which of the following is not relevant to this
conventional practice? - ANSWER-Hole
If there is a large area that needs to receive section lines, the
_________ section allows for the section lines to only be
applied around the perimeter. - ANSWER-Outline
In assembly drawings, there may be some parts that do not
receive section lines, but rather the area cut by the cutting-
plane line is filled-in solid. Which of the following is not
relevant to this conventional practice? - ANSWER-Springs
If an inclined surface is perpendicular to the frontal plane, how
does it appear
in the front view? - ANSWER-As an edge
view (line)
Any auxiliary view projected from the front view
could be called a
____________ auxiliary. -
ANSWER-Depth
Which of the following statements concerning computer-
generated auxiliary
views is true? - ANSWER-Auxiliary views are created as
easily as principal
views
, American threads are specified by the number of threads per
inch. If there are
12 threads per inch, then the pitch is ____________. -
ANSWER-0.083
The term for how far a thread advances when the threaded part
is rotated one
complete revolution, including multiple threads, is
____________. - ANSWER
Lead
-
The term that describes the shape of the ridge (or grooves)
that form the
threads is ___________. -
ANSWER-Form
Which of the following statements is the true rule of thumb
drafters use when selecting the method of representing
threads on a print? - ANSWER-If the major diameter is more
than 1 on the print, regardless of scale, then show a detailed
representation.
Which of the following Unified screw thread forms is a
special series? -
ANSWER-Constant
pitch
Actual Comprehensive Real Exam Questions And
Verified Answers ( 100% Correct Answers)
Already Graded A+ | Guaranteed Success |
Newest EXAM | Just Released!!
The broken-out section requires another type of line from the
alphabet of lines
to help show where the removed portion was broken off in a
"jagged" sort of
way. This is the _____________ line. - ANSWER-
Short break
When a(n) _____________ section is created, it can be overlaid
on the view or short break lines can be used on each side of
the view to separate it from the other visible lines. - ANSWER-
Revolved
Type of section wherein the section view is probably located
out of projection
with the other regular or auxiliary views is a(n)
___________ section. -
ANSWER-
Removed
There is a conventional practice that allows the drafter to leave
a feature unhatched, even though the cutting-plane line passes
,through it. Which of the following is not relevant to this
conventional practice? - ANSWER-Hole
If there is a large area that needs to receive section lines, the
_________ section allows for the section lines to only be
applied around the perimeter. - ANSWER-Outline
In assembly drawings, there may be some parts that do not
receive section lines, but rather the area cut by the cutting-
plane line is filled-in solid. Which of the following is not
relevant to this conventional practice? - ANSWER-Springs
If an inclined surface is perpendicular to the frontal plane, how
does it appear
in the front view? - ANSWER-As an edge
view (line)
Any auxiliary view projected from the front view
could be called a
____________ auxiliary. -
ANSWER-Depth
Which of the following statements concerning computer-
generated auxiliary
views is true? - ANSWER-Auxiliary views are created as
easily as principal
views
, American threads are specified by the number of threads per
inch. If there are
12 threads per inch, then the pitch is ____________. -
ANSWER-0.083
The term for how far a thread advances when the threaded part
is rotated one
complete revolution, including multiple threads, is
____________. - ANSWER
Lead
-
The term that describes the shape of the ridge (or grooves)
that form the
threads is ___________. -
ANSWER-Form
Which of the following statements is the true rule of thumb
drafters use when selecting the method of representing
threads on a print? - ANSWER-If the major diameter is more
than 1 on the print, regardless of scale, then show a detailed
representation.
Which of the following Unified screw thread forms is a
special series? -
ANSWER-Constant
pitch
