NCCER Electrical 1 Module 10 Exam
Questions And 100% Correct Answers
\Q\.Blue Prints - ANSWERS✔-An exact copy of reproduction of an original drawing
\Q\.Architectural drawings - ANSWERS✔-working drawings consisting of site
plans, floor plans, elevations, sectional views, details, and other information
necessary for the construction of a building
\Q\.Detail Drawing - ANSWERS✔-An enlarged detailed view, working drawing of a
single part. Also referred to as part drawing.
\Q\.Dimensions - ANSWERS✔-sizes and measurements printed on a drawing
\Q\.Electrical Drawing - ANSWERS✔-A drawing that shows the location of outlets,
switches, and electrical fixtures. An electrical drawing may be superimposed on
the floor plan.
\Q\.Elevation Drawing - ANSWERS✔-Usually the front, back and side view of a
building or object, showing height.
\Q\.Floor plan - ANSWERS✔-Layout of building as viewed from above
, \Q\.Site plan - ANSWERS✔-Location of building on the property
\Q\.Surveys show - ANSWERS✔-All property lines, existing public utilities and their
location on or near the property
\Q\.Elevation drawings show - ANSWERS✔-The exterior face of the building
\Q\.Floor plans are in - ANSWERS✔-2 dimension, length and width
\Q\.Topographic survey shows - ANSWERS✔-Property lines, contour lines, notes
and symbols
\Q\.Sectional view - ANSWERS✔-Is a cutaway view that shows the inside of the
building
\Q\.Title block - ANSWERS✔-A table located in the bottom right-hand corner of an
engineering drawing that identifies, in an organized way, all of the necessary
information that is not given on the drawing itself. Also referred to as a title strip.
\Q\.Revision Block - ANSWERS✔-Shows modifications or redrawn drawings
\Q\.Architectural scale - ANSWERS✔-1/16" = 1', 1/8" = 1' 1/4" = 1
\Q\.Engineer scale measurements - ANSWERS✔-1"=10 units through 1"=100 units
Questions And 100% Correct Answers
\Q\.Blue Prints - ANSWERS✔-An exact copy of reproduction of an original drawing
\Q\.Architectural drawings - ANSWERS✔-working drawings consisting of site
plans, floor plans, elevations, sectional views, details, and other information
necessary for the construction of a building
\Q\.Detail Drawing - ANSWERS✔-An enlarged detailed view, working drawing of a
single part. Also referred to as part drawing.
\Q\.Dimensions - ANSWERS✔-sizes and measurements printed on a drawing
\Q\.Electrical Drawing - ANSWERS✔-A drawing that shows the location of outlets,
switches, and electrical fixtures. An electrical drawing may be superimposed on
the floor plan.
\Q\.Elevation Drawing - ANSWERS✔-Usually the front, back and side view of a
building or object, showing height.
\Q\.Floor plan - ANSWERS✔-Layout of building as viewed from above
, \Q\.Site plan - ANSWERS✔-Location of building on the property
\Q\.Surveys show - ANSWERS✔-All property lines, existing public utilities and their
location on or near the property
\Q\.Elevation drawings show - ANSWERS✔-The exterior face of the building
\Q\.Floor plans are in - ANSWERS✔-2 dimension, length and width
\Q\.Topographic survey shows - ANSWERS✔-Property lines, contour lines, notes
and symbols
\Q\.Sectional view - ANSWERS✔-Is a cutaway view that shows the inside of the
building
\Q\.Title block - ANSWERS✔-A table located in the bottom right-hand corner of an
engineering drawing that identifies, in an organized way, all of the necessary
information that is not given on the drawing itself. Also referred to as a title strip.
\Q\.Revision Block - ANSWERS✔-Shows modifications or redrawn drawings
\Q\.Architectural scale - ANSWERS✔-1/16" = 1', 1/8" = 1' 1/4" = 1
\Q\.Engineer scale measurements - ANSWERS✔-1"=10 units through 1"=100 units
