Industrial Fire Brigade Technician
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A | Instant
Download Pdf
1. Which class of fire involves ordinary combustibles such as wood,
paper, and cloth?
A. Class B
B. Class C
C. Class A
D. Class D
Rationale: Class A fires involve ordinary combustible materials like
wood, paper, and textiles.
2. What is the primary purpose of a fire risk assessment in an industrial
facility?
, A. To determine employee attendance
B. To schedule maintenance
C. To identify potential fire hazards and implement control measures
D. To improve productivity
Rationale: Fire risk assessments are conducted to identify hazards,
evaluate risks, and implement control measures to prevent fires.
3. Which fire extinguisher is suitable for electrical fires?
A. Water extinguisher
B. Foam extinguisher
C. CO2 extinguisher
D. Wet chemical extinguisher
Rationale: CO2 extinguishers are non-conductive and suitable for
electrical fires.
4. What is the recommended action when discovering a small fire in an
industrial setting?
A. Ignore it
B. Evacuate immediately without action
C. Attempt to extinguish if safe, otherwise activate the alarm
D. Call maintenance
Rationale: Small fires can be tackled if it is safe to do so; otherwise,
the fire alarm should be activated.
5. Which component is essential in a sprinkler system for early fire
suppression?
, A. Fire hose reel
B. Heat-sensitive sprinkler head
C. Fire blanket
D. Fire alarm pull station
Rationale: Sprinkler systems rely on heat-sensitive heads that
activate when a certain temperature is reached.
6. What does the term “flashover” refer to in fire behavior?
A. Ignition of a single item
B. Simultaneous ignition of all combustible materials in a room
C. Fire extinguishing
D. Smoke inhalation
Rationale: Flashover occurs when all combustible materials in an
enclosed area ignite almost simultaneously.
7. Which type of personal protective equipment (PPE) is critical for
industrial firefighters?
A. Gloves and boots only
B. Safety glasses only
C. Full turnout gear including helmet, gloves, boots, and SCBA
D. Hard hat only
Rationale: Full turnout gear with self-contained breathing apparatus
(SCBA) protects firefighters from heat, smoke, and toxic gases.
8. What is the main hazard associated with chemical fires?
A. Water damage
, B. Toxic smoke and reactive chemicals
C. Noise
D. Electrical shock
Rationale: Chemical fires often produce toxic smoke and may react
violently with water or other agents.
9. Which of the following is a Class B fire?
A. Paper fire
B. Gasoline spill fire
C. Electrical fire
D. Metal fire
Rationale: Class B fires involve flammable liquids like gasoline, oil,
and solvents.
10. During a fire emergency, what is the primary role of a fire
warden?
A. Extinguish all fires
B. Operate machinery
C. Lead evacuation and ensure everyone exits safely
D. Conduct investigations
Rationale: Fire wardens manage evacuation procedures and ensure
personnel safety during emergencies.
11. How often should fire drills be conducted in an industrial
facility?
A. Every month
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A | Instant
Download Pdf
1. Which class of fire involves ordinary combustibles such as wood,
paper, and cloth?
A. Class B
B. Class C
C. Class A
D. Class D
Rationale: Class A fires involve ordinary combustible materials like
wood, paper, and textiles.
2. What is the primary purpose of a fire risk assessment in an industrial
facility?
, A. To determine employee attendance
B. To schedule maintenance
C. To identify potential fire hazards and implement control measures
D. To improve productivity
Rationale: Fire risk assessments are conducted to identify hazards,
evaluate risks, and implement control measures to prevent fires.
3. Which fire extinguisher is suitable for electrical fires?
A. Water extinguisher
B. Foam extinguisher
C. CO2 extinguisher
D. Wet chemical extinguisher
Rationale: CO2 extinguishers are non-conductive and suitable for
electrical fires.
4. What is the recommended action when discovering a small fire in an
industrial setting?
A. Ignore it
B. Evacuate immediately without action
C. Attempt to extinguish if safe, otherwise activate the alarm
D. Call maintenance
Rationale: Small fires can be tackled if it is safe to do so; otherwise,
the fire alarm should be activated.
5. Which component is essential in a sprinkler system for early fire
suppression?
, A. Fire hose reel
B. Heat-sensitive sprinkler head
C. Fire blanket
D. Fire alarm pull station
Rationale: Sprinkler systems rely on heat-sensitive heads that
activate when a certain temperature is reached.
6. What does the term “flashover” refer to in fire behavior?
A. Ignition of a single item
B. Simultaneous ignition of all combustible materials in a room
C. Fire extinguishing
D. Smoke inhalation
Rationale: Flashover occurs when all combustible materials in an
enclosed area ignite almost simultaneously.
7. Which type of personal protective equipment (PPE) is critical for
industrial firefighters?
A. Gloves and boots only
B. Safety glasses only
C. Full turnout gear including helmet, gloves, boots, and SCBA
D. Hard hat only
Rationale: Full turnout gear with self-contained breathing apparatus
(SCBA) protects firefighters from heat, smoke, and toxic gases.
8. What is the main hazard associated with chemical fires?
A. Water damage
, B. Toxic smoke and reactive chemicals
C. Noise
D. Electrical shock
Rationale: Chemical fires often produce toxic smoke and may react
violently with water or other agents.
9. Which of the following is a Class B fire?
A. Paper fire
B. Gasoline spill fire
C. Electrical fire
D. Metal fire
Rationale: Class B fires involve flammable liquids like gasoline, oil,
and solvents.
10. During a fire emergency, what is the primary role of a fire
warden?
A. Extinguish all fires
B. Operate machinery
C. Lead evacuation and ensure everyone exits safely
D. Conduct investigations
Rationale: Fire wardens manage evacuation procedures and ensure
personnel safety during emergencies.
11. How often should fire drills be conducted in an industrial
facility?
A. Every month
