Your Exm Plug

NJ Life and Health Insurance Test Questions and Complete Solutions Graded A+ Agency Contract - Answer: A contract given that is held between an insurer and an agent/producer, containing the expressed authority given to the agent/producer, and the duties and responsibilities to the principal. An agent who is in violation of the agency contract may be held personally liable to the insurer. Agent/Producer - Answer: A person who acts for another person or entity with regard to contractual...

PSI Practice exam NJ Questions and Complete Solutions Graded A+ all of the following are ownership rights EXCEPT: A: changing the beneficiary of the policy B: borrowing funds against cash value C: switching the policy from on insured to another D: assigning all of the rights of the policy to another person - Answer: C: switching the policy from on insured to another which of the following is characteristic of a non qualified plan: A: defined vesting schedule B: plan established by th...

CRANE SIGNAL PERSON BASIC TRAINING Questions and Complete Solutions Graded A . Package Deal

  The minimum crane team for a mobile crane on outriggers would consist of- A) The Crane Operator, Rigger Supervisor, and Crane Rigger B) The Crane Operator, Crane Supervisor, Rigger Supervisor, and Crane Rigger C) The Crane Operator, Crane Supervisor, and Crane Rigger D) The Crane Operator and Rigger-in-Charge E) The Crane Operator, Crane Walker, and Crane Rigger - Answer: C) The Crane Operator, Crane Supervisor, and Crane Rigger When operating floating cranes, you must start swingi...

  According to OSHA the term "must" is - Answer: Mandatory Boom length is measured from - Answer: Heel pin to the center of the boom tip sheave pin A boom angle indicator indicates the boom's angle to - Answer: Horizontal Load radius - Answer: is the horizontal distance from the center of rotation to the centerline of the vertical hoist line with the load freely suspended. leverage - Answer: cranes are based on the principal of certified load weight and add the weight ...

  According to ASME B30.5 regulations require a signal person to observe power line clearances when the; A. The crane is within a booms reach of the prohibited zone B. When the power line is over 350kV C. When the power line is under 200kV None of above - Answer: A. The crane is within a booms reach of the prohibited zone Static load is? A. Sudden swinging B. Snatching the load C. The weight of the gross load when its stationary D. Traveling with a suspended load - Answer: C. T...

  Which of the following conditions or activities create hazardous crane operational situations? a. High wind b. Following standard signals from only one signal person c. Using synthetic slings d. Leveling machine to within 1% level - Answer: High wind Which of the following equipment types is covered by the OSHA Subpart CC standard? a. Bucket trucks b. Excavators c. Crawler Cranes d. Fork lifts - Answer: c. Crawler cranes A_________________ must be used if necessary to prevent ...

  How does the operator verify LMI boom length or radius reading - Answer: Actual measurements On whose recommendation should a preventative maintenance program be set up - Answer: Crane manufacturer The proper way to calibrate a boom angle is - Answer: Use a protractor Eccentric main boom tip reeving causes_________ - Answer: Twisting of boom Frequent inspection - Answer: daily, monthly Load tests for cranes should not exceed ________% of manufacturers ratings - Answer: 110% ...

  What is defined as "the ultimate load divided by the working load"? - Answer: The safety factor What is the Halliburton Best Practice minimum allowed sling angle during lifting operations? - Answer: 60 degrees What is the #1 cause of crane fatalities? - Answer: Electrocution What is defined as "the amount of tension load that is to be applied to the lifting equipment in test to re-certify it for another year of service"? - Answer: Proof load Which of the following is...

  How many months at a maximum do personnel have to qualify as a maintenance technician? - Answer: 3 Floating cranes, aircraft-crash cranes, and virtually all pierside cranes are under the cognizance of what? - Answer: NAVFAC What is a shock absorbing device installed to cushion the impact of contacting a posotive stop? - Answer: bumper Which type of lifts require additional attention in operational areas such as selection, training, and qualification of crane crew members, organizat...

  OSHA 1926 applies to - Answer: construction law OSHA sub part CC - Answer: Construction law pertaining to cranes ASME B30.5 - Answer: Mobile and Locomotive cranes ASME B30.9 - Answer: standard on slings ASME B30.10 - Answer: standard on hooks ASME B30.23 - Answer: standard on personnel lifting systems ASME B30.26 - Answer: standard on rigging hardware OSHA 1910 applies to - Answer: general industry and maintenance ASME B30.15 - Answer: standard on mobile hydraulic c...

  When rigging a load, the center of gravity of the load must be ... the attachment. - Answer: below When personnel are being lifted in a man basket, the total weight of the load, basket, and rigging may not exceed ... percent of the crane's rated load - Answer: 50% Standardized hand signals for mobile cranes have been developed by - Answer: ANSI If a malfunction occurs during operation, the first thing to do is... - Answer: lower the load if possible lowering the load just abo...

  The personnel platforms rigging may only be used for the platform, employees, tools and ______ - Answer: Materials For hoisting operations, the crane must be level; within _____ percent, with outriggers fully developed per manufacturers specifications. - Answer: 1 During proof testing, the platform and rigging are required to be loaded to _____ percent of the platforms rated capacity. - Answer: 125 According to OSHA 1926.1431, all eyes in wire rope slings must be fabricated with __...

  What are the 5 steps in the ORM process? - Answer: 1. Identify hazards 2. Assess hazards 3. Make risk decisions 4. Implement controls 5. Supervise How many process levels are in ORM? - Answer: 1. Time Critical 2. Deliberate 3. In-Depth What wind speed will you ask the Hold Boss/Hatch Captain to secure crane operations? - Answer: 25 Knots sustained How is the crane powered? - Answer: Electric & Electric Hydraulic What are the two series of shipboard pedestal cranes? - Answ...

  Which statement best describes the importance Osha 29 CFR 1926.550 places on a crane manufacturers instructions specifications and limitations? - Answer: They must be followed exactly as the law According to Osha 29 CFR 1926.550 where must hand signals be placed - Answer: On the job site According to Osha 1910.180, how accurate must the load weight be when making picks in the structural portion of the load chart - Answer: Plus or minus 10% According to Osha 1910.180, are cranes all...

  Tracks can extend for more stability and retract for transportation or limited access areas or install counter weights on the crawler frames. - Answer: How do some crawler cranes increase their stability? 40% - Answer: Wheeled truck cranes can usually climb grades up to ____% grade. Counterweights - Answer: Many cranes require their _____ to be removed before driving or transporting them on the highway. Rough terrain cranes (RT) - Answer: These cranes have 4-wheel steering and are ...

  Must be conspicously posted on all equipment : Rated load capacity Cannot be modified without the written approval of the manufacturer : Equipment - Answer: Match the following terms to their related category of regulations True - Answer: Parts associated with cranes and derricks that may need to be guarded include belts, gears, shafts, and drums. False - Answer: A minimum clearance of 10 feet is required for all lines rated above 50 kV plus an additional 0.4 inches for each 1 kV o...

Tower Cranes Quiz Questions and Complete Solutions Graded A+

  What is the purpose of crane outriggers? Choose all answers that apply. - Answer: A. A movable boom that can be raised, lowered and rotated. B. A spool with a steel cable that extends to the end of the boom and attaches to the load. C. Counterweights that offset the weight of the load. Which of the following components are typically found on cranes? Choose all answers that apply. - Answer: B. Increase the stability of the crane. C. Help keep the crane level. Identify the factors...

XACTIMATE CAT CODES Questions and Complete Solutions Graded A Package Deal