Daltonvicky

Which of the following does not represent how STOTT Pilates has evolved from Joseph Pilates original method? -ANSWER - Focus on more flat spine than original method What is another term used to describe mid-sagittal plane? A) Transverse B) Circuduction C) Frontal D) Medial Plan -ANSWER - D Rotation does not occur at which of the following joints: A) knee joint B) pelvis C) elbow joint D) spine -ANSWER - C Lordosis describes which of the following? A) An exaggerated curve ...

___: the fully extended length of the ladder. -ANSWER - The working height _____: provides the primary function of providing continuous rotation of the aerial device on a horizontal plane. -ANSWER - Turntable the working height of north American-made aerial ladders range from ___ to ___ feet. -ANSWER - 50 to 135 feet The working height for aerial ladders is measured from: -ANSWER - the ground to the highest ladder rung with the ladder at maximum elevation and extension The main uses ...

Which action would put you in danger at an electrical emergency? Select one: a.Remaining inside a vehicle that is in contact with a downed power line b.Wearing structural fire fighting personal protective equipment c.Touching a vehicle that is in contact with electrical wires d.Jumping outside of the ground gradient -ANSWER - c.Touching a vehicle that is in contact with electrical wires Which type of operational strategy involves keeping personnel outside of the IDLH environment? Select...

Which type of foam proportioner can compromise firefighter safety by slowing firefighters down since it requires the concentrate to be available where the nozzle is being operated? Select one: a. Compressed air foam system (CAFS) b. Apparatus-mounted proportioner c. Foam nozzle eductor d. In-line eductor -ANSWER - Foam nozzle eductor The premixing method of foam proportioning is typically used with: Select one: a. fog nozzles attached to a large hoseline. b. a fixed fire protection sy...

Power tools should be inspected: -ANSWER - at the beginning of every shift. Which location would be ideal for testing fire hose? -ANSWER - Empty parking lot next to the fire station Which action should be avoided when service testing fire hose because it can cause damage to the hose? -ANSWER - Testing hose in an area with rocks and debris When service testing a fire hose, it is necessary to: -ANSWER - have access to a water source that is sufficient for charging the hose. When inspec...

Fire hose should be washed with mild soap or detergent using scrub brushes: Select one: it has been exposed to smoke. every use. its annual inspection. it has been exposed to oil. -ANSWER- d. if it has been exposed to oil. Which hose roll creates a compact roll that can easily be transported for special situations, such as at a high-rise incident? Select one: a.Donut roll b.Twin donut roll c.Straight roll d.Triple layer roll -ANSWER- b. Twin donut roll Which is a guideline fo...

Which is the most obvious sign of fire cause? Select one: a. Extent of damage b. Occurrence of flashover c. Time between incipient and growth stages d. Competent ignition source -ANSWER - Competent ignition source An occupant stating that the room smelled like propane immediately before the fire started is an example of _____ evidence. Select one: a. circumstantial b. direct c. trace d. physical -ANSWER - direct At a fire scene, firefighters should NOT: Select one: a. keep a wr...

Which type of operational strategy involves keeping personnel outside of the IDLH environment? Select one: a. Defensive b. Offensive c. Direct d. Indirect - ANSWER-Defensive The most important variable when choosing the correct hoseline to use is: Select one: a. nozzle reaction. b. hydrant variety. c. water hammer. d. flow rate. - ANSWER-flow rate. When a transition is made from an offensive interior strategy to a defensive strategy and crews must withdraw from the interior, they...

What is a function of station and work uniforms? a. Provide respiratory protection b. Protect wearer from hazardous materials c. Provide protection against advanced fire behavior d. Identify wearer as a member of the fire department - ANSWER-d. Identify wearer as a member of the fire department In order to avoid contact burns and heat stress after leaving a heated environment, firefighters should: a. thoroughly inspect PPE to check for damage b. place contaminated PPE in the cab of the ...

Finger-jointed timber - ANSWER-is composite building material composed of small pieces of wood merged to form boards using various types of glue. Medium density fiberboard - ANSWER-is composite building material that is a type of laminated wood closely resembling hardwood and is used for doors and decorative moldings. Particle board - ANSWER-is composite building material composed of small flakes of wood merged together with glue to form boards used for furniture. Synthetic wood - ANSWE...

A(An) _____ concept allows all responders to use a similar, coordinated approach with a common set of authorities, protections, and resources. -ANSWER- all hazard Which duty is a Fire Fighter I expected to perform? -ANSWER- Forcing entry into a structure Which statement describes the difference in the roles of a Fire Fighter I and a Fire Fighter II? -ANSWER- A Fire Fighter I works under the direct supervision of a Fire Fighter II or company officer. Which type of specialized fire compan...

Importance of Testing -ANSWER - If tests are not performed properly, there are many construction procedures and materials that cannot be confirmed as adequate. Visual observation alone is insufficient. Types of Tests -ANSWER - The contractor performs quality control (QC) testing to determine whether construction procedures and materials are producing the desired contractual product. Procedures -ANSWER - The contractor must outline proposed "testing procedures" as defined in Section 01 ...

To determine the fleet size (number of haulers) for the project, one of two deterministic models are used. What are the two models? -ANSWER- rational and queues The CQM process provides full documentation of the materials incorporated into the work, work performed, and tests results of work in place. -ANSWER- True Within the federal CQM (construction quality management) program, who has the responsibility for quality control? -ANSWER- Builder Which party in the traditional construction ...

It provides a structure problem-solving process to help identify the root cause of a problem and a remedy for that problem A. QI B. QC C. QA D. QP -ANSWER - A. QI It is necessary to establish for performance monitoring and ensure that the performance achieved satisfies quality requirements A. QI B. QC C. QA D. QP -ANSWER - D. QP It includes analytical processes, general policies, practices, and procedures that define how all aspects of work are done A. QI B. QC C. QA D. QP E...

A bug base is a system for keeping track of every bug logged in a database system. Most important consideration when deciding on a bug base is simple so users can easily report bugs -ANSWER - A test case management system is the best way to document and keep track of test cases! Test cases are supplemented by applying black-box methods to the module's specification. -ANSWER - The most important consideration in program testing is the design and creation of effective test cases. White-box...

Which of the following individuals volunteered to perform the first review of medical college curriculum and education processes leading to more rigorous academic standards for medical schools? - ANSWER-Henry Pritchett Which state was the first to pass legislation that required nurses to be registered? - ANSWER-North Carolina Which of the following is NOT a type of managed care? - ANSWER-TQM The regular and frequent assessment of healthcare processes and their outcomes and related costs...

The purpose of Construction Quality Management is to: -ANSWER-Achieve the quality established by properly developed requirements through the combined responsibility, but seperate efforts of contractpr smd government personnel. Construction Quality Management is the performance of tasks, which ensure that construction is performed. -ANSWER-According to plans and specifications, on time, within a defined budget and a safe work environment. Partnering relationships are based upon: -ANSWER-Bui...

Quickbooks online, what is the difference between voiding and deleting a check? -ANSWER - D. Voiding a check keeps it in reports but reduces its value to zero Deleting a check removes it from reports other than the Audit Log. Which three tasks can you perform when using Bank Feeds in the Banking area? (Choose 3) -ANSWER - A. Issue a Stop Payment request for a check B. Match transactions entered in Quickbooks to the bank information as they clear the bank. D. Unreconcile a previously clea...

Why would you hide or collapse sub accounts on a report? -ANSWER - To temporarily hide unnecessary detail and hide parent accounts What should you do after you click save & close on a customer credit memo? -ANSWER - Choose between retained as an available credit, give a refund or apply to an invoice Which of the following CAN be memorized in quickbooks? -ANSWER - check Which is NOT shown on the payroll summary report on quickbooks? -ANSWER - information necessary to complete your state ...

Why would you hide or collapse sub accounts on a report? -ANSWER - D.) To temporarily hide unnecessary details and hide parent accounts What should you do after you click Save and Close on a Customer Credit Memo? -ANSWER - D.) Choose between retained as an available credit, give a refund or apply to an invoice Which of the following can be memorized in QuickBooks? -ANSWER - A.) Checks Which is NOT shown on the Payroll Summary Report in QuickBooks? -ANSWER - A.) Information necessary to ...