Stuviascores

What do the terms "catastrophic, critical, moderate, and negligible" describe in the risk assessment matrix? - ANSWER Level of severity of an adverse event's effect What is the first step in the risk management (RM) process? - ANSWER Identify hazards How are hazards identified during mission planning? - ANSWER By applying the METT-TC framework to examine risks posed by the mission, enemy, terrain and weather, troops and equipment, time, and civil considerations Which of the following...

Risk - ANSWER uncertainty concerning the occurrence of a loss Objective risk (aka degree of risk) - ANSWER the relative variation of actual loss from expected loss Law of large numbers - ANSWER as the number of exposure units increases, the more closely the actual loss experience will approach the expected loss experience Subjective risk - ANSWER uncertainty based on a person's mental condition or state of mind Chance of loss - ANSWER the probability that an event will occur Obje...

The first stages of Continuous Risk Management is: - ANSWER Planning The second stages of Continuous Risk Management is: - ANSWER Identification The third stages of Continuous Risk Management is: - ANSWER Analysis The fourth stages of Continuous Risk Management is: - ANSWER Response The last stage of Continuous Risk Management is: - ANSWER Monitoring and control The process of setting risk parameters and tolerances and planning the risk management cycle. - ANSWER Risk Planning ...

What publication covers risk management? - ANSWER AR 100-14 What is risk management? - ANSWER Risk management is the process of identifying, assessing, and controlling risks arising from operational factors and making decisions that balance risk costs with mission benefits. What are the principles that provide a framework for implementing the risk management process? - ANSWER a. Integrating risk management into mission planning, preparation, and execution. b. Making risk decisions at the ...

Risk management principles - ANSWER Accept the risk when benefits outweigh the cost. Accept no unnecessary risk. Anticipate and manage Risk by planning. Make risk decisions at the right level. Accept risk when benefits outweigh the cost - ANSWER Marine Corps tradition emphasizes seizing initiative and taking decisive action. The goal of risk management is not to eliminate risk, but management the risk, so missions are accomplished with the minimum amount of loss to maximize success Acc...

Which Risk Management principle is best demonstrated by applying the Risk Management process as early as possible in order to provide the greatest opportunity to make well informed risk decisions and implement effective risk controls? - ANSWER Anticipate and manage risk by planning Select the activity listed below which is best associated with implementing the in-depth level of Risk Management. - ANSWER Developing new training curricula. Elevating the risk decision up the chain-of-command ...

Elevating the risk decision up the chain-of-command is part of what Risk Management Principle? - ANSWER Which risk management principle is best demonstrated by thorough hazard identification and assessment in order to prevent needlessly jeopardizing Marines and equipment? - ANSWER Accept no unnecessary risk Which risk management principle is best demonstrated by applying the risk management process as early as possible in order to provide the greatest opportunity to make well informed ris...

Which Risk Management principle is best demonstrated by through hazard identification and assessment in order to prevent needlessly jeopardizing Marines and equipment? - ANSWER Accept no unnecessary risk. The statement, "You are more likely to control risks when they are identified earlier rather than later" is associated with what Risk Management principle? - ANSWER Anticipate and manage risk by planning LCpl Jones wants to drive to his hometown for liberty in his private motor vehicle ...

Emergency Preparedness Response Course (EPRC) - Operator Course (8 hrs) Latest Update 2023(RATED A+)1) The Disaster Mental Health Response Team can be called upon to assist victims and disaster responders. Which of the following is NOT a service that they may provide: - ANSWER Provide professional psychological treatment 2) Which of the following statements does NOT describe spores produced by Bacillus anthracis, causative agent of anthrax? - ANSWER Sensitive to UV light. 3) Which of the f...

Emergency Preparedness Response Course (EPRC) Operator Course Pre-Test Accurate 100%(SCORED A+)Emergency Preparedness Response Course (EPRC) Operator Course Pre-Test Accurate 100%(SCORED A+)Emergency Preparedness Response Course (EPRC) Operator Course Pre-Test Accurate 100%(SCORED A+)Emergency Preparedness Response Course (EPRC) Operator Course Pre-Test Accurate 100%(SCORED A+)Emergency Preparedness Response Course (EPRC) Operator Course Pre-Test Accurate 100%(SCORED A+)

Emergency Preparedness Response Course (EPRC) - Clinician Course (8 hrs) (pre- test)Correct 100%(RATED A+) Emergency Preparedness Response Course (EPRC) - Clinician Course (8 hrs) (pre- test)Correct 100%(RATED A+) Emergency Preparedness Response Course (EPRC) - Clinician Course (8 hrs) (pre- test)Correct 100%(RATED A+) Emergency Preparedness Response Course (EPRC) - Clinician Course (8 hrs) (pre- test)Correct 100%(RATED A+) Emergency Preparedness Response Course (EPRC) - Clinician Co...

1) One of the five intervention principles in the management of the stress response is promoting the sense of safety. How can this be accomplished? - ANSWER Leadership provide an accurate, organized voice to help circumvent threat (correct) 2) ________ may be thought of as a form of identification. - ANSWER Detection to protect or treat (correct) 3) What form of ionizing radiation can penetrate deeply into body tissue? - ANSWER Photon (correct) 4) Which of the following is a cyanide ant...

The purpose of a safety interlock is to - ANSWERPrevent operation of a tool unless certain conditions are met. Trip device - ANSWERPhotoelectric sensors (sometimes called light curtains) are frequently used as part of a Safety Data Sheet - ANSWERWhat is the most important source of information about the hazards of a particular chemical? What is OSHA's role in the workplace? - ANSWEROSHA's responsibility is worker safety and health protection What is one of the most important roles ...

customer satisfaction should always be the first objective considered when developing ________ - ANSWERNew or improved products a(n) _______ customer is a person or organization that receives services or products in exchange for compensation - ANSWERexternal The ___________ of the product describes the features required for the product to perform the tasks for which it was intended - ANSWERfunction Engineers working with manufacturing to become aware of tooling limitations and other p...

The first stage in a team development process is an awkward stage for the team members called __________. - storming - norming - performing - forming - ANSWERforming Product designers should always consider the effects of tooling design and cost during __________. - Prototype development - Process capability studies - Team kickoff meetings - Maintenance of a machine - ANSWERPrototype development Supervisors should set measurable objectives to __________. - eliminate the need to re...

What are the steps of a job safety analysis? - ANSWERDocument an itemized sequence of job task,Identify the hazard of each task, Propose potential solutions to problems and Prepare a list of potential problems What does NIOSH stand for? - ANSWERNation Institute for Occupational Safety and Health OSHA - ANSWERThe federal agency concerned with the enforcement and regulation of safety regulations. The risk of injury for new employees is more or less likely than for those with experience? -...

What are the fourteen Subindustries of Manufacturing - ANSWERChemicals Computers & Electronic Products Electrical Equipment & Appliances Food & Beverage Furniture Machinery Nonmetallic Minerals Petroleum & Coal Products Plastics & Rubber Production Primary and Fabricated Metals Printing Textile, Textile Products, Apparel & Leather Transportation Equipment Wood & Paper Moving and storage of materials is the concentration known as: - ANSWERlogistics and inventory control Apprent...

1. An_________ customer is a person or organization that receives services or products in exchange for compensation. a) Internal b) External c) In-house d) Departmental - ANSWERExternal 2. Improving external customer satisfaction is the main objective of __________. a) Customer service department. b) Retired employees c) Maintenance departments d) HR departments. - ANSWERcustomer service 3. Vendors could be considered what type of customer? a) Main b) Substantial c) Internal d...

Five principles of patrolling - ANSWERPlanning-quickly make a simple plan and effectively communicate it to the lowest level Recon-confirm what you think you know and learn what you don't Security-preserve your force as awhole Control-clarify the concept of the operation and commanders intent Common Sense-use all information and good judgement to make sound timely decisions The Troop leading procedures (type this one out) - ANSWERReceive the mission, issue a warning order, make a tentati...

Characteristics of the Offense -ANSWER Audacity, Concentration, Surpise, Tempo Audacity -ANSWER Simple plan of action, boldly executed Concentration -ANSWER Massing of overwhelming effects of combat power to achieve a single purpose Surprise -ANSWER In the offense, achieved by attacking the enemy at a time or place they do not expect or in a manner for which they are unprepared Tempo -ANSWER The relative speed and rhythm of military operations over time with respect to the enemy O...