Resistors Study guides, Class notes & Summaries

1. A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required?: Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave 2. A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do?: Replace it with a larger MOV 3. On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue?: Suicide Circuit 4. You have an old DC motor a...

NEIEP 700 Final Exam Version 1 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: When an elevator constructor describes a normal open contact or a making contact he or she is describing the same contact configuration. Answer: True Q: As current flows through a relay's coil _______________________ generated by the coil will pull or pick the relay's armature . Answer: Magnetic field Q: The most common relay used today is the plug type....

A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue? - Suicide Circuit You have an old DC motor ...

An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the correct answer: current lags the voltage The power factor of a load is equal to the ____________ power divided by the ____________ power. correct answer: True ; apparent A 10-ohms and 20-ohms resistor are connected in parallel. The total line current drawn by this parallel combination is 30 amps. Under these conditions, the line voltage wil...

An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the Correct Answer current lags the voltage The power factor of a load is equal to the ____________ power divided by the ____________ power. Correct Answer True ; apparent A 10-ohms and 20-ohms resistor are connected in parallel. The total line current drawn by this parallel combination is 30 amps. Under these conditions, the line voltage will be...

NEIEP 800 Final Exam Questions & Answers With Complete Solutions-Hydro elevators in low rise applications do not need an _____ _____ room. - overhead machine Some advantages of hydros are lower equipment and building construction costs because the load of a hydro is carried to the _____ where as the load of a traction car is carried by the _____ _____. - ground, building structure When drilling the jack hole, the only proper way to determine if the hole is plumb is to remove the drill stem...

If a circuit has a voltage of 30 volts and a current of 2 amps, what is the resistance? CORRECT ANSWER 15 ohms If a stator in wye configuration reads 120 VAC line-to -neutral, what should the line-to-line voltage be? CORRECT ANSWER 208 VAC What is the term used to refer to the common connection point/fourth terminal created when you connect a stator in wye configuration? CORRECT ANSWER Neutral The best way to integrate safety on the job site? CORRECT ANSWER Planning and checklists Th...

PSC1501 Portfolio. 100% CORRECT questions, answers, workings and explanations. Whatsapp +25479 093 7672 for assistance.EXPERIMENT 1 : Step 1 : What happens if an electric circuit does not have a resistor ? if there is no resistance, short circuit is connected across an dc source, infinite current will flow as I=V/R, and R=0. Practically, if you connect a wire directly across a battery, it will start heating. Resistance of short wire is in the range of Ohms which is very less as compare to re...

ATT Test 2 Questions and Answers Latest Updated 2023 Definition of series circuit Current flows in a single path through all components In which direction does current flow? Negative to positive Current is the ____ throughout whole circuit Same 4 steps of troubleshooting Analyze, check setup, calculate/measure, check results An open series component drops _____ volts Applied Resistance is how much over open component? Max or infinite Short provide...

CETA Study Guide Questions With All Complete Solutions 8.33 meters is the full wavelength in air for what RF frequency? - ANSWER- 36 MHz Decimal 164 would appear as what in binary? - ANSWER- A resistor has color stripes yellow, violet, violet, silver. It is? - ANSWER- 470 MegOhm +/- 10% What is the total capacitance of three capacitors valued at 100uf, 100uf and 50uf when connected in series? - ANSWER- 25 pf What is the ripple frequency of a full wave single phase bridge rectif...

Conductors connected to the high leg of a four-wire delta system be color-coed with what color of insulation or tape? -correct answer -Orange (NEC Section 110.15) Dry-type transformers rated at 112.5kVA or less may be located out in the open provided they are separated from combustible material by a distance of ____. -correct answer -12" If the power factor is improved by the addition of a capacitor, the motor running overcurrent device must be selected based on the ___. -correct answer -...