Propane con Study guides, Class notes & Summaries

CETP Practice Test (100 Questions) With All Correct Answers

What are the two fuel gases most generally used for gas welding? CORRECT ANSWER Oxygen and acetylene What fuel gases are used for welding aluminum? CORRECT ANSWER Oxygen and hydrogen What are two types of torches used in gas welding? CORRECT ANSWER Balanced-pressure torches and injector torches -The injector torch uses fuel gas at pressures between just above 0 and 2 psi. This torch is typically used with propane and propylene gas. High-pressure oxygen comes through a small nozzle inside ...

CERTIFIED FIRE INVESTIGATOR EXAM PACK / 200+ QUESTIONS AND CORRECT ANSWERS 2024 GRADED A+ . 2 / 15 1. What are the reasons for investigating fires?: To eliminate reoccurrenceUpgrade existing fire codes Determine if a criminal act took place 2. What is NFPA 921: Guide for Fire and Explosion Investigations 3. What is NFPA 1033: Standards for Professional Qualifications for Fire Investiga-tion 4. What is NIST?: National Institute of Standards and Technology 5. What is CCAI?: California C...

CETP PRE-CERTIFICATION REVIEW EXAM / QUESTIONS AND VERIFIED ANSWERS 2023/2024 / ALL CORRECT. CETP Pre-Certification Review 1. Propane has many advantages as a fuel source, including:: A. It burns slowly because of its low pump-octane B. It is stationary and non-portable C. It is a clean-burning, non-toxic fuel D. It leaves a high-residue as it burns 2. If a service technician is asked to perform a task that he or she is not fully trained or qualified for, the best action is to:: A. Sa...

DHL Interview ATPL Questions with 100% Correct Answers What is the VOR change over distance? - answer60NM What is the minimum distance between parallel runways? - answer915m what the key points of using Mode 2 for parallel runways? - answerOnly straight in approaches allowed interception angle of no more that 30 degrees must be straight and level 1NM for localiser must be straight and level 2NM for Glideslope Minimum separation of 3NM on same Loc Min separation of 2 NM on adjacent Loc ...

DHL Interview ATPL Questions with 100% Correct Answers What is the VOR change over distance? - answer60NM What is the minimum distance between parallel runways? - answer915m what the key points of using Mode 2 for parallel runways? - answerOnly straight in approaches allowed interception angle of no more that 30 degrees must be straight and level 1NM for localiser must be straight and level 2NM for Glideslope Minimum separation of 3NM on same Loc Min separation of 2 NM on adjacent Loc ...

API 571 Practice Exam #2 Questions And Correct Answers, 100% Verified Ammonium bisulfide corrosion is an aggressive corrosion occurring in hydroprocessing reactor effluent streams and in units handling alkaline sour water. Several major failures have occurred in hydroprocessing reactor effluent systems due to localized corrosion. The least resistant material to this type of corrosion is: a) aluminum alloys b) carbon steel c) 300 Series SS d) duplex SS B 5.1.1.2.2 a) For materials susce...

API 571 Practice Exam #2 Questions And Correct Answers, 100% Verified Ammonium bisulfide corrosion is an aggressive corrosion occurring in hydroprocessing reactor effluent streams and in units handling alkaline sour water. Several major failures have occurred in hydroprocessing reactor effluent systems due to localized corrosion. The least resistant material to this type of corrosion is: a) aluminum alloys b) carbon steel c) 300 Series SS d) duplex SS B 5.1.1.2.2 a) For materials susce...

API 571 Practice Exam #2 Questions And Correct Answers, 100% Verified Ammonium bisulfide corrosion is an aggressive corrosion occurring in hydroprocessing reactor effluent streams and in units handling alkaline sour water. Several major failures have occurred in hydroprocessing reactor effluent systems due to localized corrosion. The least resistant material to this type of corrosion is: a) aluminum alloys b) carbon steel c) 300 Series SS d) duplex SS B 5.1.1.2.2 a) For materials susce...

1.A(n) energy resource is one that is consumed faster than it can regener- ate. 2. When converting energy from one form to another, . 3. About 90% of the energy used by an incandescent lightbulb is . 4. Kinetic Energy Potential Energy 5. When considering the conversion of energy from moving water to electrici- ty, put the following steps in the prop- er order. 6. Inferred energy can also be calledheat 7.When comparing an incandescent and an LED lightbulb, the lightbulb is more efficient...