Coatings Study guides, Class notes & Summaries

NACE CIP 1 CBT Exam (Quizzes and Study Questions) How is the process of steel corrosion ALWAYS described? - ANSWER electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - ANSWER zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - ANSWER decrease The e...

The amount of reflection of each surface of cr-39 lenses is approximately? A. 2% B. 4% C. 6% D. 8% - 4% The absorption of light in lenses is classified by two variables. What are they? A. Base curve and thickness B. Index of refraction and thickness C. Thickness and lens transmission D. Tint, and lens transmission - C. Thickness and len transmission The denser the tint in a lens____ A. The greater transmission of light through the lens B. The greater internal reflections in th...

NACE CIP Level 1 Exam 2023 | Guide with Verified Answers (2023/2024 Update) Q: What are the two primary components of a liquid applied coating? Answer: Pigment, Vehicle (Resin/Binder + Solven) Q: What are the three (3) methods by which a coating provides corrosion control? Answer: barrier, inhibitive, sacrificial (cathodic protection) Q: What are the three different ways a coating can adhere to the surface? Answer: Chemical, Mechanical, Polar/valance or combo of al...

(NV) - • Non-visible contamination (VC) - • Visible surface cleanliness NACE No. 5/SSPC-SP 12 - describes the use of a high-energy water stream to strip off existing coatings and remove contaminants on a substrate being prepared prior to coatings application. When compared to abrasive blasting, And water jetting - this method has certain advantages particularly for safety and environmental control. Respiratory protection requirements are less stringent and waste (abrasive) dispos...

Non destructive tests for heat shrink sleeves included Destructive tests for heat shrink sleeves include The following materials can be used to repair FBE Describe common reasons that wood might be painted Non-Ferrous substrates include: Special substrates that have rightly adherent oxide films include Maintenance coating operations are defined as Life cycle of a coating system can be affected by: When determining the coating system life cycle, the following s...

NACE #1/SSPC-SP5 - WHITE METAL BLAST CLEANING. When viewed without magnification the surface shall be free from visible oil, grease, dust dirt, mill shcale, rust , coating, oxides, corrosion products and other foreign matter. NACE #2/SSPC-SP 10 - NEAR WHITE METAL BLAST CLEANING. When viewed without magnification the surface shall be free from visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products, and other foreign matter. Random staining shall be limited to...

One guide for enclosures for coatings projects is: Low Temperature concerns during coatings application include: High temperatures concerns during coatings application include: High humidity during coating application: Coatings may be applied by the following methods: Coatings Product Data Sheets (Paint Specs) provide users with the following: SDS contains the following: Failure of coatings to cure may be caused by: Some of the problems that can be caused by amine blush a...

The Consumer Product Safety Commission restricts the amount of lead in coatings to what? - Answer 90ppm .009% As of 2012 The Consumer Product Safety Commussion restricts the amount of lead in coatings on what surfaces? -Answer Residential Structures Publicly accessed commercial buildings Recreational areas Toys Play-ground equipment Which homes have a 86% chance of containing lead based paint according to EPA? -Answer Homes built before 1940 Which homes have an 66% chance of containi...

NACE CIP 1 CBT Exam (Quizzes and Study Questions) How is the process of steel corrosion ALWAYS described? - Correct answerelectrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - Correct answer-zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - Correct answer-decrease The electrolyte is a medium which carries the following type of current?...

NACE CIP 1 CBT Exam (Quizzes and Study Questions) with 100% Correct Answers How is the process of steel corrosion ALWAYS described? - Answer-electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - Answer-zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - Answer- decrease The electrolyte is a medium which carries the following type o...