Oil burner Study guides, Class notes & Summaries

Oil Burner Final Questions And Answers With Verified Solutions Oil Burner Final Questions And Answers With Verified Solutions

Oil Burner Exam Questions And Answers With Verified Tests Oil Burner Exam Questions And Answers With Verified Tests

Oil Burner Test Questions And Answers With Verified Solutions Oil Burner Test Questions And Answers With Verified Solutions

Oil Burner Test Questions And Answers With Verified Study Solutions Oil Burner Test Questions And Answers With Verified Study Solutions

What is the first thing a tech should do when arriving at a no combustion call? - Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - False When in the presence of a flame, a cad cell normally reads.. - 300-1000 ohms If a pump is use...

What is the largest exposed tank allowed in a building without a permit - 660 g What is tank approval - UL 80 UL 142 A supply tank shall be securely supported by ridged, non-combustible supports to prevent settling, sliding or lifting. true or false - True What is the largest amount of oil that can be stored with exposed tanks? - 1320 g What is the closest distance a supply tank can be to the burner - 5 ft What is the gauge of a 275 g above ground tank - 12 gauge

What chemical compound is the CAD cell made of? - a. cadmium oxide b. cadmium nitride c. cadmium sulfide d. cadmium bromide Answer-C A permanent split-capacitor motor has a ____. - a. start and run capacitor b. start capacitor only c. run capacitor only d. split phase capacitor Answer-C

A fuel oil storage tank cannot be installed: - In the furnace room 5 feet within heating unit What temperature does a thermal wheel automatically activate at - 165°F Who inspects an oil burner installation - State fire marshal Any valve used on a oil burner install must be: - Fusible valve What form is used to pull an oil burner permit - CMR.4 What size pipe is used to CrossConnect tank outlet piping - 1/2 inch When is an oil safety valve used - On an existing installation when a burner...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - ANSWER Increase Atomizing type burners were designed to burn which type of fuel - ANSWER Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - ANSWER Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - ANSWER In the furnace room with 5' of heating unit. The primary purpo...