Alle 111 resultaten
Sorteer op
Meest verkochte samenvattingen voor BTEC Level 3 National Engineering, Student Book
-
engineering assignment 2 unit 10
- Samenvatting • 10 pagina's • 2020 Populair
-
Ook in voordeelbundel
-
- €6,07
- 7x verkocht
- + meer info
Voorbeeld 1 van de 10 pagina's
You will receive 8 pages fully detailed assignment answer to the following question: P3 
Describe mechanical, physical, thermal and electrical and magnetic properties and state one practical application of each property in an engineering context 
P4 :Describe the effects on the properties and behaviour of processing metals, polymers, ceramics and composites and of post-production use of smart materials. 
P5Use information sources to select a different material for two given applications, describ...
-
Unit 7 - Calculus to Solve Engineering Problems
- Samenvatting • 5 pagina's • 2021 Populair
-
- €9,11
- 5x verkocht
- + meer info
Voorbeeld 2 van de 5 pagina's
Your informal report should contain: ● analysis 
● worked solutions to the problems 
Each worked solution should be laid out clearly and contain brief explanations of the stages of the calculation to indicate your understanding of how calculus can be used to solve an engineering problem. You explanation should be detailed in response to questions 9 and 10 to show how the variables are optimised in each case. Graphs should be well presented and clearly labelled and comparisons between methods...
-
ENGINEERING FULL ASSIGNMENT 1 UNIT 10 (P1,P2,M1)
- Samenvatting • 13 pagina's • 2021 Populair
-
Ook in voordeelbundel
-
- €3,64
- 4x verkocht
- + meer info
Voorbeeld 2 van de 13 pagina's
You will receive a 8 pages fully detailed with images responding to the following questions: P1:Describe the structure (including atomic structure) associated with a given metal, polymer, ceramic, composite and smart material. Part of Assignment 1 - Structure and Classification of Engineering Materials BTEC Level 3 Extended Diploma in Engineering: Unit 10 – Properties and Applications of Engineering Systems Know the structure of and classify engineering materials Atomic structure: element; a...
Schrijf jij zelf ook samenvattingen? Bied deze dan te koop aan en verdien per keer dat je document wordt gekocht.
-
BTEC LEVEL 3 ENGINEERING COMPLETE ASSIGNMENT 1 UNIT 10(P1,P2,M1)
- Essay • 8 pagina's • 2020 Populair
-
- €5,46
- 3x verkocht
- + meer info
Voorbeeld 1 van de 8 pagina's
You will receive a 7 page detailed *without copying and pasting!* ; with images responding to the following question: P1:Describe the structure (including atomic structure) associated with a given metal, polymer, ceramic, composite and smart material. Part of Assignment 1 - Structure and Classification of Engineering Materials BTEC Level 3 Extended Diploma in Engineering: Unit 10 – Properties and Applications of Engineering Systems Know the structure of and classify engineering materials At...
-
BTEC Level 3 Engineering Unit 12 Assignment 2 (P3,P4,D2)- Applications of Mechanical Systems in Engineering
- Essay • 8 pagina's • 2021 Populair
-
Ook in voordeelbundel
-
- €10,33
- 3x verkocht
- + meer info
Voorbeeld 2 van de 8 pagina's
You will receive fully detailed pages of answers to the following questions 
P3 Describe the operation of one seal, one type of packing and two different types of bearing, giving a typical application for each one. 1 
 
P4 Describe two different types of screwed fastening and two different types of rivet giving a typical application for each one. [IE4] 2 
 
D2 Justify the choice of engineering components in a given engineering application.
Wil jij je uitgaves terugverdienen?
-
BTEC Level 3 Engineering Unit 12 FULL Assignment 4(p7,p8,p9,M1,M2)
- Samenvatting • 35 pagina's • 2021 Populair
-
Ook in voordeelbundel
-
- €6,68
- 3x verkocht
- + meer info
Voorbeeld 1 van de 35 pagina's
**DISCOUNT Selling price NOW ONLY 4.99!!! VALID UNTIL MAY 2024** note(after that Selling price would change to 10.99) 
You will receive fully detailed assignment of about 35 pages! for achieving the perfect grade! , quick note( 100% not copied and paste!) with answer to all the following criteria for the whole unit: 
*M1* compare and contrast the operation and use of flat plate clutches, centrifugal clutches and fluid couplings in mechanical power transmission systems linkage mechanism * M...
-
BTEC Level 3 Engineering Unit 12 Full Assignment 1
- Samenvatting • 10 pagina's • 2021 Populair
-
Ook in voordeelbundel
-
- €8,62
- 2x verkocht
- + meer info
Voorbeeld 2 van de 10 pagina's
You will receive a detailed assignment answers to the following questions: P1: describe the purpose and application of three different types of lubricant P2 :describe the operation and maintenance of three different lubrication systems and P3: justify the use of a particular lubricant and lubrication system in a given engineering application
-
Engineering Principles June 2017 exam with mark scheme
- Tentamen (uitwerkingen) • 39 pagina's • 2023 Populair
-
Ook in voordeelbundel
-
- Gratis
- 1x verkocht
- + meer info
Voorbeeld 4 van de 39 pagina's
Engineering Principles June 2017 exam with mark scheme. Clear explanation with detailed calculation easy to use.
-
BTEC Level 3 Engineering: Unit 12 Full Assignment 3(P5,P6)-Applications of Mechanical Systems in Engineering
- Samenvatting • 15 pagina's • 2021 Populair
-
Ook in voordeelbundel
-
- €3,64
- + meer info
Voorbeeld 2 van de 15 pagina's
You will receive fully detailed pages of answers to the following questions: 
P5 Describe the operation of two different types of cam and follower and two different types of linkage mechanism 
P6 Describe the arrangement and operation of two different kinds of belt drive, two different kinds of chain drive and two different kinds of gear train
-
BTEC Level 3 Engineering: Unit 15 (P8) - Electro, Pneumatic and Hydraulic systems and Devices
- Essay • 4 pagina's • 2021 Populair
-
- €4,85
- + meer info
Voorbeeld 1 van de 4 pagina's
You will receive a 2 page fully detailed assignment answer to the following question: P8. use routines and carry out maintenance on given electro, pneumatic and hydraulic components and a given electro-pneumatic or electro-hydraulic system . part A..Carry out inspection checks on two of their following components: Linear Hydraulic Actuator, Hydraulic Vane or Gear Pump an Air compressor. part B. routine maintenance servicing on a hydraulic training rig in their training room as the mechanic indi...
Nieuwste samenvattingen van BTEC Level 3 National Engineering, Student Book
-
Engineering Principles June 2017 exam with mark scheme
- Tentamen (uitwerkingen) • 39 pagina's • 2023 Nieuw
-
Ook in voordeelbundel
-
- Gratis
- 1x verkocht
- + meer info
Voorbeeld 4 van de 39 pagina's
Engineering Principles June 2017 exam with mark scheme. Clear explanation with detailed calculation easy to use.
-
Unit 7 - Calculus to Solve Engineering Problems
- Samenvatting • 5 pagina's • 2021 Nieuw
-
- €9,11
- 5x verkocht
- + meer info
Voorbeeld 2 van de 5 pagina's
Your informal report should contain: ● analysis 
● worked solutions to the problems 
Each worked solution should be laid out clearly and contain brief explanations of the stages of the calculation to indicate your understanding of how calculus can be used to solve an engineering problem. You explanation should be detailed in response to questions 9 and 10 to show how the variables are optimised in each case. Graphs should be well presented and clearly labelled and comparisons between methods...
-
BTEC Level 3 Engineering: Unit 15 (P8) - Electro, Pneumatic and Hydraulic systems and Devices
- Essay • 4 pagina's • 2021 Nieuw
-
- €4,85
- + meer info
Voorbeeld 1 van de 4 pagina's
You will receive a 2 page fully detailed assignment answer to the following question: P8. use routines and carry out maintenance on given electro, pneumatic and hydraulic components and a given electro-pneumatic or electro-hydraulic system . part A..Carry out inspection checks on two of their following components: Linear Hydraulic Actuator, Hydraulic Vane or Gear Pump an Air compressor. part B. routine maintenance servicing on a hydraulic training rig in their training room as the mechanic indi...
Schrijf jij zelf ook samenvattingen? Bied deze dan te koop aan en verdien per keer dat je document wordt gekocht.
-
ENGINEERING FULL ASSIGNMENT 1 UNIT 10 (P1,P2,M1)
- Samenvatting • 13 pagina's • 2021 Nieuw
-
Ook in voordeelbundel
-
- €3,64
- 4x verkocht
- + meer info
Voorbeeld 2 van de 13 pagina's
You will receive a 8 pages fully detailed with images responding to the following questions: P1:Describe the structure (including atomic structure) associated with a given metal, polymer, ceramic, composite and smart material. Part of Assignment 1 - Structure and Classification of Engineering Materials BTEC Level 3 Extended Diploma in Engineering: Unit 10 – Properties and Applications of Engineering Systems Know the structure of and classify engineering materials Atomic structure: element; a...
-
BTEC Level 3 Engineering: Unit 12 Full Assignment 3(P5,P6)-Applications of Mechanical Systems in Engineering
- Samenvatting • 15 pagina's • 2021 Nieuw
-
Ook in voordeelbundel
-
- €3,64
- + meer info
Voorbeeld 2 van de 15 pagina's
You will receive fully detailed pages of answers to the following questions: 
P5 Describe the operation of two different types of cam and follower and two different types of linkage mechanism 
P6 Describe the arrangement and operation of two different kinds of belt drive, two different kinds of chain drive and two different kinds of gear train
Wil jij je uitgaves terugverdienen?
-
BTEC Level 3 Engineering Unit 12 Assignment 2 (P3,P4,D2)- Applications of Mechanical Systems in Engineering
- Essay • 8 pagina's • 2021 Nieuw
-
Ook in voordeelbundel
-
- €10,33
- 3x verkocht
- + meer info
Voorbeeld 2 van de 8 pagina's
You will receive fully detailed pages of answers to the following questions 
P3 Describe the operation of one seal, one type of packing and two different types of bearing, giving a typical application for each one. 1 
 
P4 Describe two different types of screwed fastening and two different types of rivet giving a typical application for each one. [IE4] 2 
 
D2 Justify the choice of engineering components in a given engineering application.
-
BTEC Level 3 Engineering Unit 12 Full Assignment 1
- Samenvatting • 10 pagina's • 2021 Nieuw
-
Ook in voordeelbundel
-
- €8,62
- 2x verkocht
- + meer info
Voorbeeld 2 van de 10 pagina's
You will receive a detailed assignment answers to the following questions: P1: describe the purpose and application of three different types of lubricant P2 :describe the operation and maintenance of three different lubrication systems and P3: justify the use of a particular lubricant and lubrication system in a given engineering application
-
BTEC Level 3 Engineering Unit 12 FULL Assignment 4(p7,p8,p9,M1,M2)
- Samenvatting • 35 pagina's • 2021 Nieuw
-
Ook in voordeelbundel
-
- €6,68
- 3x verkocht
- + meer info
Voorbeeld 1 van de 35 pagina's
**DISCOUNT Selling price NOW ONLY 4.99!!! VALID UNTIL MAY 2024** note(after that Selling price would change to 10.99) 
You will receive fully detailed assignment of about 35 pages! for achieving the perfect grade! , quick note( 100% not copied and paste!) with answer to all the following criteria for the whole unit: 
*M1* compare and contrast the operation and use of flat plate clutches, centrifugal clutches and fluid couplings in mechanical power transmission systems linkage mechanism * M...
-
engineering assignment 2 unit 10
- Samenvatting • 10 pagina's • 2020 Nieuw
-
Ook in voordeelbundel
-
- €6,07
- 7x verkocht
- + meer info
Voorbeeld 1 van de 10 pagina's
You will receive 8 pages fully detailed assignment answer to the following question: P3 
Describe mechanical, physical, thermal and electrical and magnetic properties and state one practical application of each property in an engineering context 
P4 :Describe the effects on the properties and behaviour of processing metals, polymers, ceramics and composites and of post-production use of smart materials. 
P5Use information sources to select a different material for two given applications, describ...
-
BTEC Level 3 Engineering: Unit 54 (P6) – Monitoring and Analysing Engineering Activities
- Essay • 2 pagina's • 2020 Nieuw
-
Ook in voordeelbundel
-
- €3,65
- + meer info
Voorbeeld 1 van de 2 pagina's
You will receive a 1 page fully detailed assignment answer to the following question: P6: Analyse the risks associated with a given engineering activity. 

BTEC Level 3 Engineering: Unit 54 – Monitoring and Analysing Engineering Activities
-
1
-
2
-
3
-
4
-
5
- ...
Hoeveel heb je al uitgegeven op Stuvia? Stel je eens voor dat alle andere studenten JOU betalen voor je samenvatting. Ka-ching! Ontdek alles over verdienen op Stuvia