logo-home
logo

NIMS MACHINING

NIMS MACHINING

Here are the best resources to pass NIMS MACHINING. Find NIMS MACHINING study guides, notes, assignments, and much more.

All 18 results

Sort by:

NIMS Machining EXAM STUDY GUIDE 2026/2027 COMPLETE QUESTIONS WITH VERIFIED CORRECT ANSWERS || 100% GUARANTEED PASS <NEWEST VERSION>

  • Exam (elaborations)

    NIMS Machining EXAM STUDY GUIDE 2026/2027 COMPLETE QUESTIONS WITH VERIFIED CORRECT ANSWERS || 100% GUARANTEED PASS <NEWEST VERSION>

  • -
    -
    -
    44
    July 2026
    2025/2026
    A+
  • NIMS Machining EXAM STUDY GUIDE 2026/2027 COMPLETE QUESTIONS WITH VERIFIED CORRECT ANSWERS || 100% GUARANTEED PASS <NEWEST VERSION> The safest way to remove chips from a lathe or milling machine is to use a: - ANSWER Brush Small chips left on the spindle nose of the lathe should be cleaned to avoid: - ANSWER Run out on work holding devices Grease guns are used to insert grease into: - ANSWER Zerk fittings on machine tools To lubricate the ways of a lathe, the gibs of ...
  • BenjaminsStudyHub
    $14.49 More Info
NIMS Machining Level I Preparation Guide

  • Exam (elaborations)

    NIMS Machining Level I Preparation Guide

  • -
    -
    -
    5
    December 2025
    2025/2026
    A+
  • NIMS Machining Level I Preparation Guide1. Surface
  • Onlystudents
    $11.99 More Info
NIMS CNC LATHE OPERATIONS PRACTICE TEST | Correct & Verified Answers | National Institute for Metalworking Skills | Pass Guaranteed - A+ Graded

  • Exam (elaborations)

    NIMS CNC LATHE OPERATIONS PRACTICE TEST | Correct & Verified Answers | National Institute for Metalworking Skills | Pass Guaranteed - A+ Graded

  • -
    -
    -
    35
    April 2026
    2025/2026
    A+
  • Pass the NIMS CNC Lathe Operations Certification on your first attempt with this comprehensive practice test featuring correct and verified answers. This A+ Graded resource contains complete practice test questions and verified answers covering all key content areas including CNC lathe setup and operation, G-code and M-code programming (G00, G01, G02, G03, G96, G97, G98, G99, M03, M04, M05, M08, M09, M30), tooling selection and setup (turning tools, boring bars, threading tools, grooving tools, ...
  • BESTSELLERSTUVIA01
    $15.50 More Info
NIMS CNC Lathe Operations Certification Exam – National Institute for Metalworking Skills | 2026/2027 Test with Correct and Verified Answers.

  • Exam (elaborations)

    NIMS CNC Lathe Operations Certification Exam – National Institute for Metalworking Skills | 2026/2027 Test with Correct and Verified Answers.

  • -
    -
    -
    37
    April 2026
    2025/2026
    A+
  • This document contains exam-style questions and verified answers for the NIMS CNC Lathe Operations certification exam. It covers essential topics such as CNC machine setup, tool selection, G-code programming, lathe operations, machining safety, and precision measurement. The material is structured as a practice test with answers to help learners review key machining concepts and prepare effectively for the NIMS certification assessment.
  • ExamAceStuvia
    $13.00 More Info
NIMS Machining Level 1 Exam Questions All Correct Answers

  • Exam (elaborations)

    NIMS Machining Level 1 Exam Questions All Correct Answers

  • Available in bundle
    -
    -
    -
    4
    December 2024
    2024/2025
    A+
    Available in bundle
  • NIMS Machining Level 1 Exam Questions All Correct Answers Applying the formula below, find the taper per foot for a workpiece with a large diameter of 3.5 inches and a small diameter of 2.75 inches with a taper length of 5.5 inches. - Answers - 1.64 inches Use a calculator to determine the included angle for a taper of 0.550 inches per foot. - Answers - 2.626 degrees What is the taper per foot for a piece 7.5 inches long with a 0.056 taper? - Answers - 0.0896 inch taper per foot Refe...
  • Stuviaascorers
    $12.49 More Info
NIMS Machining Level I Preparation Guide Exam Questions 100% All Solved

  • Exam (elaborations)

    NIMS Machining Level I Preparation Guide Exam Questions 100% All Solved

  • Available in bundle
    -
    -
    -
    5
    December 2024
    2024/2025
    A+
    Available in bundle
  • NIMS Machining Level I Preparation Guide Exam Questions 100% All Solved The safest way to remove chips from a lathe or milling machine is to use a: - Answers - Brush Small chips left on the spindle nose of the lathe should be cleaned to avoid: - Answers - Run out on work holding devices Grease guns are used to insert grease into: - Answers - Zerk fittings on machine tools To lubricate the ways of a lathe, the gibs of a mill, or the cross slide of a grinder: - Answers - Use lubricant ...
  • Stuviaascorers
    $13.49 More Info
NIMS Machining Level I Preparation Guide Milling Exam Questions 100% Correct Answers

  • Exam (elaborations)

    NIMS Machining Level I Preparation Guide Milling Exam Questions 100% Correct Answers

  • -
    -
    -
    6
    December 2024
    2024/2025
    A+
  • NIMS Machining Level I Preparation Guide Milling Exam Questions 100% Correct Answers Surface finish can be measured in - Answers - Microinches Surface finish can be checked with a - Answers - Comparison chart The depth of a 3/8-inch diameter counterbore can best be measured with a - Answers - Depth micrometer Productions parts are considered rejected when - Answers - Dimensions are out of tolerance The width of a milled slot, hole diameter or counterbore depth can best be measured...
  • Stuviaascorers
    $12.49 More Info
NIMS Machining Level 2 Test Practice Questions Latest 2024 with Verified Answers

  • Exam (elaborations)

    NIMS Machining Level 2 Test Practice Questions Latest 2024 with Verified Answers

  • Available in bundle
    -
    -
    -
    3
    November 2024
    2024/2025
    A
    Available in bundle
  • National Institute for Metalworking Skills NIMS Machining Level 2 Test Preparation To convert inches to millimeters, a machinist would use a constant of _________. - ANS: 25.4 The feed rate for converting a hole on a drill press should be __________ that of drilling. - ANS: 2 times The feed rate for reaming a hole on a drill press should be __________ that of drilling. - ANS: 1/8th The most accurate method of measuring an angle is a : - ANS: combination set Which type of head for a...
  • dennys
    $11.29 More Info
NIMS Machining Level I Test Preparation/ Practice Questions updated 2024 with Correct and Verified Answers

  • Exam (elaborations)

    NIMS Machining Level I Test Preparation/ Practice Questions updated 2024 with Correct and Verified Answers

  • Available in bundle
    -
    -
    -
    6
    November 2024
    2024/2025
    A+
    Available in bundle
  • NIMS Machining Level I Test Preparation/ Practice Questions updated 2024 with Correct and Verified Answers The safest way to remove chips from a lathe or milling machine is to use a: - ANS: Brush Small chips left on the spindle nose of the lathe should be cleaned to avoid: - ANS: Run out on work holding devices Grease guns are used to insert grease into: - ANS: Zerk fittings on machine tools To lubricate the ways of a lathe, the gibs of a mill, or the cross slide of a grinder: - ANS: U...
  • dennys
    $11.39 More Info
NIMS Core Machining Skills Exam Questions Correct Answers

  • Exam (elaborations)

    NIMS Core Machining Skills Exam Questions Correct Answers

  • Available in bundle
    -
    -
    -
    6
    December 2024
    2024/2025
    A+
    Available in bundle
  • NIMS Core Machining Skills Exam Questions Correct Answers air nozzle - Answers - A device used to spray air. Air nozzles can be used by an operator to remove chips from inside a CNC machine. bore - Answers - A single-point cutting tool used to enlarge a preexisting hole. Boring, which can be performed on either a lathe or a mill, helps create a concentric hole that meets tight tolerances. Brix scale - Answers - A system used for measuring the concentration of a substance that has been m...
  • Stuviaascorers
    $13.49 More Info
Precision Machining NIMS Review Exam Questions 100% Correct Solutions

  • Exam (elaborations)

    Precision Machining NIMS Review Exam Questions 100% Correct Solutions

  • Available in bundle
    -
    -
    -
    5
    December 2024
    2024/2025
    A+
    Available in bundle
  • Precision Machining NIMS Review Exam Questions 100% Correct Solutions Dial bore gages are used to measure - Answers - holes Using the Machinist Hand Book, determine the hole size for a Class FN2 force fit if the diameter is 1.625. - Answers - 1.6226 to 1.6242 The stock allowance for reaming is - Answers - 1/64 inch Which type of head on a combination set is used to find the center of a rod? - Answers - center Which of the following combinations of layout instrumentsprovides the mo...
  • Stuviaascorers
    $13.49 More Info
Nims Certification for Precision machining Exam Questions Correct Answers

  • Exam (elaborations)

    Nims Certification for Precision machining Exam Questions Correct Answers

  • Available in bundle
    -
    -
    -
    4
    December 2024
    2024/2025
    A+
    Available in bundle
  • Nims Certification for Precision machining Exam Questions Correct Answers brush - Answers - the safest way to remove chips from a lathe or milling machine run out on work holding devices - Answers - small chips left on the spindle nose of the lathe should be cleaned to avoid zerk fittings on machine tools - Answers - Grease guns are used to insert grease use lubricant found in central lubricating systems - Answers - to lubricate the ways of a lathe, the gibs of a mill, or the cross s...
  • Stuviaascorers
    $13.49 More Info
NIMS Machining Level 1 Test Questions With Correct Answers

  • Exam (elaborations)

    NIMS Machining Level 1 Test Questions With Correct Answers

  • -
    -
    -
    8
    November 2024
    2024/2025
    A+
  • NIMS Machining Level 1 Test Questions With Correct Answers To lubricate the ways of a lathe, the gibs of a mill, or the cross slide of a grinder:☑️Correct Ans-Use lubricant found in central lubricating systems ("one shots")
  • TutorNest
    $8.69 More Info
NIMS Machining Final Exam Questions With Correct Answers

  • Exam (elaborations)

    NIMS Machining Final Exam Questions With Correct Answers

  • -
    -
    -
    8
    November 2024
    2024/2025
    A+
  • NIMS Machining Final Exam Questions With Correct Answers What is the most common injury that may occur during a filing operation?☑️Correct Ans-Being stabbed with the tang (file without a handle)
  • TutorNest
    $6.89 More Info
NIMS Certification for Precision Machining Practice Questions with Verified Answers latest 2024

  • Exam (elaborations)

    NIMS Certification for Precision Machining Practice Questions with Verified Answers latest 2024

  • Available in bundle
    -
    -
    -
    5
    November 2024
    2024/2025
    A
    Available in bundle
  • National Institute for Metalworking Skills NIMS Certification for Precision Machining The safest way to remove chips from a lathe or milling machine - ANS: brush Small chips left on the spindle nose of the lathe should be cleaned to avoid - ANS: run out on work holding devices Grease guns are used to insert grease - ANS: zerk fittings on machine tools To lubricate the ways of a lathe, the gibs of a mill, or the cross slide of a grinder - ANS: use lubricant found in central lubricating...
  • dennys
    $10.29 More Info
NIMS Milling Practice Test Questions with 100% Correct Answers

  • Exam (elaborations)

    NIMS Milling Practice Test Questions with 100% Correct Answers

  • Available in bundle
    -
    -
    -
    4
    November 2024
    2024/2025
    A
    Available in bundle
  • National Institute for Metalworking Skills NIMS Milling Practice Test If a dimension on a drawing is 4.868" with a tolerance of +/- .003", what is the largest the dimension can check and still be in tolerance? - ANS: 4.871" If you are standing in front of a vertical CNC machining center, what direction does the X-axis travel? - ANS: left to right A boxed dimension is defined as a... - ANS: basic S.D.S. (Safety Data Sheet) are sheets that? - ANS: Describe the chemicals and mate...
  • dennys
    $10.69 More Info
NIMS CNC Lathe Operations Practice Test with Correct and Verified Answers

  • Exam (elaborations)

    NIMS CNC Lathe Operations Practice Test with Correct and Verified Answers

  • Available in bundle
    3.0
    (1)
    3.0
    1
    4
    November 2024
    2024/2025
    A
    Available in bundle
  • NIMS CNC Lathe Operations Practice Test Typically done as part of the start-up procedure, which of the following is the process of positioning the CNC turning center's axes at a fixed reference position to allow the MCU to accurately establish / track the machine's position? - ANS: Homing To maintain proper coolant levels and concentrations, and to ensure a machine tool has sufficient lubrication, a machinist should check the machine's fluids: - ANS: Every shift Which code identi...
  • dennys
    $10.29 More Info
National Institute for Metalworking Skills (NIMS) CNC Operator Test Practice Questions updated 2024 with Correct and Verified Answers

  • Exam (elaborations)

    National Institute for Metalworking Skills (NIMS) CNC Operator Test Practice Questions updated 2024 with Correct and Verified Answers

  • Available in bundle
    -
    -
    -
    14
    November 2024
    2024/2025
    A
    Available in bundle
  • National Institute for Metalworking Skills NIMS CNC Operator Test Given an 18 ¾" length of stock, how many 2 ½'" pieces can be cut from it? - ANS: 7.5 (18.75/2.5) How often should you check the lubrication levels on a machine? - ANS: Daily On a blueprint, what do you call a dimension in a box (boxed dimension)? - ANS: Base When should you wear your safety glasses in the shop? - ANS: Always What is the RPM formula for drilling? - ANS: What is the code for rapid travers...
  • dennys
    $10.69 More Info
And that's how you make extra money
Did you know that on average a seller on Stuvia earns $82 per month selling study resources? Hmm, hint, hint.
Learn more Get started