- Study guides, Class notes & Summaries

Drive Train - correct answer transmits power from the engine to the vehicles drive wheels Power Flow - correct answer mechanical, hydraulic, and electrical components make path for engine power Front engine RWD system - correct answer power transmitted to rear drive axles Trans axles - correct answer combination of transmission and differential assembly. can be used on front or rear assembly. common in front and mid-engine designs conventional or longitudinal mounting - correct a...

-

3 pages

Written in 2025/2026

Grade A+

RealGrades

D - correct answer New Blocker rings are being installed in a transaxle assembly. Tech A says that the inside surface should be polished with crocus cloth. Tech B says that the inside surface should be lightly sanded with #400 grit paper. A. A only B. B only C. both D. Neither C - correct answer Housing badly cracked . Technician A says that this could cause the transmission to shift hard Tech B says that this could cause the transmission to slip out of gear A. A only b. B only c...

-

49 pages

Written in 2025/2026

Grade A+

RealGrades

Master Manual Transmission and Drivetrain Systems with this comprehensive collection of 450+ exam-style questions and verified answers covering the essential principles of automotive manual transmissions, clutch operation, drivetrain components, and diagnostic procedures. This study guide provides detailed coverage of manual transmissions, manual transaxles, clutch systems, pressure plates, flywheels, synchronizers, blocker rings, gear ratios, gear trains, overdrive and underdrive, final drive a...

-

47 pages

Written in 2026/2027

Grade A+

PROFFKERRYMARTIN

What is a Manual Transmission? - correct answer A manual transmission allows the driver to select gears manually using a shifter, with a clutch pedal that is used to engage and disengage the transmission from the engine power, and they usually have 3 to 6 forward speeds along with neutral and reverse What are the 4 types of Manual Transmissions? - correct answer Non-constant mesh, constant mesh, non-synchronized, and synchronized How does a Non-Constant Mesh transmission work? - correct an...

-

3 pages

Written in 2025/2026

Grade A+

RealGrades

Which of the following gear ratios generates the highest torque or power output? - correct answer11.12:1 Which of the following gear ratios shows an overdrive condition? - correct answer0.85:1 What are the most commonly used transmission and transaxle designs? - correct answer six-speed What is the advantage of a double-clutch transmission? - correct answer change gears faster How are the speed gears installed in a standard transmission? - correct answer They freewheel around the out...

-

3 pages

Written in 2025/2026

Grade A+

RealGrades

The driver can increase and decrease the amount of power the engine develops using the: Accelerator pedal. Differential gears. Clutch pedal. Final drive assembly. - correct answer Accelerator pedal ____ are used to center and hold the shafts in alignment so that the gears rotate smoothly when in mesh with their mating gears Snap rings Thrust washers Bearings Gears - correct answer Bearings ____ are used to support gears and are machined precisely to accommodate bearings and ind...

-

2 pages

Written in 2025/2026

Grade A+

RealGrades

How are transmissions rated by their manufacturers? - correct answer How much torque they can handle What are synchronizers used for - correct answer To match gear speed with shaft speed What's the final drive unit used for - correct answer To provide gear reduction and Change direction of the power delivered to drive wheels Is the countershaft gear inconstant mesh with the input gear? - correct answer Yes What do two gears in mesh try to do to each other - correct answer Push...

-

3 pages

Written in 2025/2026

Grade A+

RealGrades

Which of the following is the first driveline component to receive power from the engine in a manual transmission vehicle? - correct answer The clutch Technician A says a manual transmission must always be lubricated with the exact gear oil or fluid specified by the manufacturer. Technician B says other fluids or gear oils may be used once the vehicle is out of warranty. Who is correct? - correct answer Technician A Technician A says the final drive assembly almost always has a gear ratio ...

-

3 pages

Written in 2025/2026

Grade A+

RealGrades

When discussing current trends in manual transmissions, Technician A says that six- and seven-speed transmissions reduce fuel economy because of the weight of their extra parts .Technician B says that some manual transmissions are shifted by internal solenoids and do not require a shift lever. Who is correct? a. A only b. B only c. Both A and B d. Neither A nor B - correct answer b. B only While discussing shift forks, Technician A says most shift forks have two fingers that ride in the g...

-

9 pages

Written in 2025/2026

Grade A+

RealGrades

Technician A says the purpose of a lockup piston clutch is to improve fuel economy Technician B says a lockup piston clutch is designed with a damper assembly to transmit driving torque and absorb shock. who is correct? A B A & B Neither - correct answer A&B What is not a component of the TCC? damper assembly piston plate clutch friction plate roller clutch - correct answer roller clutch The multiplier of torque converter fluid power is the_____________? - correct answer stator...

-

5 pages

Written in 2025/2026

Grade A+

RealGrades

when you park and leave a manual-shift vehicle, it is best to set the parking brake and shift to: - correct answer both first gear and reverse the primary challenge in driving a manual transmission vehicle is learning to: - correct answer release the clutch smoothly to move forward on a vehicle with a manual transmission, a frequent mistake is: - correct answer shifting into a higher gear at too low a speed on a vehicle with a manual transmission, the point at which the engine begins to...

-

1 pages

Written in 2025/2026

Grade A+

RealGrades

a. True - correct answer If the fluid reservoir for a hydraulic clutch is low, the entire system should be checked for fluid leaks. a. True b. False d. Both A and B - correct answer In front-wheel drivetrains, the CV joint nearer the transaxle is the ___. a. inner joint b. inboard joint c. outboard joint d. Both A and B a. plunge joint - correct answer A CV joint that is capable of in-and-out movement is a ___. a. plunge joint b. fixed joint c. inboard joint d. Both A and C a....

-

5 pages

Written in 2025/2026

Grade A+

RealGrades

The clutch friction disc always rotates with which component - correct answer Transmission input shaft What is the purpose of the torsional coil springs in the clutch disc - correct answer Absorb the torque forces Which of the following is a likely cause of a vibrating clutch - correct answer Loose flywheel bolts What takes place when the clutch pedal is released on a hydraulic clutch linkage - correct answer Master cylinder piston is released by spring tension At what point does the...

-

5 pages

Written in 2024/2025

Grade A+

RealGrades

Two technicians are discussing gearing. Technician A says overdrive gearing reduces torque. Technician B says overdrive gearing increases torque. Who is correct? - correct answer Tech A Two technicians are discussing 4WD. Technician A says 4WD is accomplished by placing a transmission at each axle. Technician B says 4WD is accomplished by placing a transfer case in the drivetrain. Who is correct? - correct answer Tech B Which of the following categories could a 1.00:1 gearing be referred t...

-

8 pages

Written in 2024/2025

Grade A+

RealGrades

Manual Trans Exam #2| Latest Updated| 80 Actual Exam Complete Questions And Answers | 100% Rated Correct | 100% Verfied | Already Graded A+

-

12 pages

Written in 2024/2025

Grade A+

STUVIAOPTIONS

Manual Trans Exam 2 UPDATED Exam Questions and CORRECT Answers A four-speed transmission is making a grinding noise only while shifting into second gear. This could be caused by ________. - Correct Answer- A faulty 1-2 synchronizer sleeve Two technicians are discussing a transmission that is noisy in first, second, third, and reverse but quiet in fourth gear. Technician A says that there is probably a bad input shaft gear. Technician B says that it probably has a faulty 1-2 synchronize...

-

9 pages

Written in 2024/2025

Grade A+

STANFORDGRADESS

Manual Trans exam 2 questions and answers with complete solution

-

7 pages

Written in 2022/2023

Grade A

Wiseman

Manual Trans Exam 1 with complete solution;2023 solution guide

-

10 pages

Written in 2022/2023

Grade A+

Johnloton

Manual Trans Exam 1 with complete solution;2023 solution guide

-

5 pages

Written in 2022/2023

Grade A+

Wiseman

Manual Trans exam 2 actual test 2023 graded A+

-

7 pages

Written in 2022/2023

Grade A+

Wiseman