- Study guides, Class notes & Summaries

What does it mean for a signal to be "normaled" on a patchbay? - correct answers The signal is flowing from the top patch point to the bottom patch point without having to run a patch cable; a connection is being made internally. True or False: The first 16 XLR connectors on the wall panel in the live room (Room 215F) are normaled to the first 16 mic preamps on the API. - correct answers True True or False: When the red arrow on the patchbay's normaling configuration is pointing t...

-

4 pages

Written in 2025/2026

Grade A+

RealGrades

In lieu of lifting pipe for inspection, what method of NDE might be useful? - correct answers guided wave ultrasonics The results of the visual inspection should be documented to facilitate: - correct answers follow-up inspection External visual inspections should be conducted at maximum intervals listed in table 6-1 of API 570. What is an alternative method of establishing intervals for external visual inspections? - correct answers Using Risk Assessment per API RP 580 What is the defi...

-

9 pages

Written in 2025/2026

Grade A+

RealGrades

There are two types of tensile test specimens allowed. They are? - correct answers Standard and Reduced Section Approximately how deep shall the notches be for a nick break test be cut? - correct answers 1/8" The essential variables associated with prodecure and welder qualifications are? Identical or Not Identical? - correct answers Not Identical For pipe less than 2.375" OD, how many test welds shall be performed to obtain the required number of test specimens? - correct answers...

-

1 pages

Written in 2025/2026

Grade A+

RealGrades

Specification for line pipe - correct answers API Specification 5L Recommended practice for railroad transportation of line pipe - correct answers APL Recommended Practice 5L1 Recommended practice for truck transportation of line pipe - correct answers API Recommended Practice 5LT Recommended practice for transportation of line pipe on barges and marine vessel - correct answers API Recommended Practice 5LW Specification for pipeline valves - correct answers API Specification 6D St...

-

6 pages

Written in 2025/2026

Grade A+

RealGrades

Application Programming Interface - correct answers API API - correct answers Mechanism that enables two software components to communicate wirh each other using set of definitions and protocols. Application - correct answers any software with a distinct function interface - correct answers a contract of service between two applications API - correct answers a contract that defines how two computers communicate with each other using requests and responses. - correct answers how A...

-

3 pages

Written in 2025/2026

Grade A+

RealGrades

What is the maximum allowed time between the testing of pressure relieving devices per API 510? - correct answers 10 years. Who is responsible for the rerating calculations of a Section Vlll Div. 1 vessel? - correct answers The manufacturer or an owner-user engineer (or his designated representative). If the requirements of API 510 are met who determines if a temporary fillet weld patch may be used in a repair? - correct answers An engineer competent in pressure vessel design and the API a...

-

12 pages

Written in 2025/2026

Grade A+

RealGrades

The API Legacy Plus is a _________ console with all ___________ circuitry. - correct answers Modular In-Line /// Discrete What are some of the benefits to a modular layout? - correct answers 1.) Quickly Replaceable Parts 2.) New or upgradeable pieces that can be swapped out 3.) Lots of Patch Points The two modular slots underneath the channel VU meters are know as the ______ and ________ 200 slot. - correct answers Upper /// Lower What specific modules do we have in the Upper 200 slot...

-

4 pages

Written in 2025/2026

Grade A+

RealGrades

Draw API Signal Flow - correct answers :) Which monitors are active? - correct answers Genelec 8050A What is method question #1? - correct answers What inputs does console offer? What is method question #2? - correct answers How do I access any input into any fader? What is method question #3? - correct answers Which console input is the MTR output connected to? What is method question #4? - correct answers How do I direct the output of the faders to the direct output, MTB or SB? ...

-

3 pages

Written in 2025/2026

Grade A+

RealGrades

Alternating current field measurement (ACFM) - correct answers Electromagnetic inspection technique that can be used to detect and size surface-breaking (or in some cases near-surface) defects in both magnetic and non-magnetic materials. Actual Throat - correct answers The shortest distance between the weld root and the face of a fillet weld. Air Carbon Arc Cutting (CAC-A) - correct answers A carbon arc cutting process variation removing molten metal with a jet of air. Arc Blow - correc...

-

11 pages

Written in 2025/2026

Grade A+

RealGrades

None! Number of welds to RT is established by the primary code - correct answers How many welds does 577 require to be RT'd Arc blow - correct answers Deflection of an arc from normal path because of opposing magnetic forces Arc length - correct answers Distance from the tip of the welding electrode to the adjacent surface of the weld pool Autogenous - correct answers Welds made without filler metal Backing - correct answers Material or device placed on back side of a joint, to su...

-

5 pages

Written in 2025/2026

Grade A+

RealGrades

A - correct answers What does "L" mean in Austentic SS, like 304L? A) Has a low carbon content B) has a low chrome content C) has a low nickel level D) has a low toughness level E) is lousy steel A - correct answers What does "H" mean in Austenitic SS, like 316 H? A) Has a high carbon content B) has a high chrome content C) has a high nickel level D) has a high toughness level E) is horrible steel A - correct answers Which of the following is NOT a Ferritic Steel? A...

-

43 pages

Written in 2025/2026

Grade A+

RealGrades