- Study guides, Class notes & Summaries

API 570 Bundled Exam Questions and CORRECT Answers

-

3 items

STANFORDGRADESS

Mark's API 510 STUDY GUIDE Exam Questions and Answers 100% Solved Which of the following activities is NOT included in the scope of API 510? - A) rerating a vessel - B) Operating a vessel. - C) replacing a vessel head - D) internally inspecting a vessel - B Which of the following activities is NOT included in the scope of API 510? - A) setting relief device intervals - B) performing vessel alterations - C) Performing vessel fabrication - D) performing vessel maintenance - C Which ...

-

137 pages

Written in 2024/2025

Grade A+

JOSHCLAY

API 570 practice test ACTUAL Questions and CORRECT Answers Document any systems containing tell-tale holes. - CORRECT ANSWER- The practice of installing guage holes (tell-tale holes) has been discontinued with the advent of current thickness measuring techniques. What action should the inspector take should he or she encounter piping systems that contain guage holes?

-

13 pages

Written in 2024/2025

Grade A+

STANFORDGRADESS

API 510 Closed Book Practice Exam UPDATED ACTUAL Questions and CORRECT Answers API 510 says that widely scattered pitting can be ignored provided that the: - CORRECT ANSWER- remaining thickness is not less than 1/2 the minimum required thickness. Rupture disks are commonly used - CORRECT ANSWER- to protect a pressure relief valve from corrosive products. When repairs and alterations are being conducted, which individual or organization is responsible - CORRECT ANSWER- Repair Organiza...

-

14 pages

Written in 2024/2025

Grade A+

STANFORDGRADESS

API 570 - Study Guide UPDATED ACTUAL Questions and CORRECT Answers Pressure applied inside a pipe creates stress in the pipe wall. These stresses are highest on which weld orientation? - CORRECT ANSWER- longitudinal weld Per B31.3, how much RT is conducted on circumferential welds of a pipe in normal service? - CORRECT ANSWER- 10% for welded pipe, the normal thickness of mill-under-tolerance is? - CORRECT ANSWER- .010 or 10 mils

-

16 pages

Written in 2024/2025

Grade A+

STANFORDGRADESS

API 570 practice test UPDATED ACTUAL Questions and CORRECT Answers In severe refinery services which type of pipe is normally used? - CORRECT ANSWER- seamless Pressure applied inside a pipe creates stress in the pipe wall. These stresses are highest on which weld orientation? - CORRECT ANSWER- longitudinal weld Per B31.3, how much RT is conducted on circumferential welds of a pipe in normal service. - CORRECT ANSWER- 10%

-

5 pages

Written in 2024/2025

Grade A+

STANFORDGRADESS

Mark's API 510 STUDY GUIDE UPDATED ACTUAL Questions and CORRECT Answers Which of the following activities is NOT included in the scope of API 510? - A) rerating a vessel - B) Operating a vessel. - C) replacing a vessel head - D) internally inspecting a vessel - CORRECT ANSWER- B

-

92 pages

Written in 2024/2025

Grade A+

STANFORDGRADESS

An exchanger shell has a locally corroded area. The owner decides to repair this area with weld buildup. During this repair, the shell should be: - checked for distortion What is considered a vessel alteration? - replacement of a hemispherical head with a tori-spherical head Widely scattered pits can be ignored provided the extent of the pitting does NOT exceed: - 7in squared in an 8in diameter circle

-

14 pages

Written in 2024/2025

Grade A+

KenAli

When developing an inspection plan equipment shall be evaluated based on - Present or possible types of damage mechanisms External inspection intervals for equipment in non continuous service are - The same as for vessels in continuous service Where can detailed information concerning common damage mechanisms be found - API RP 571 In radiographic examination penetrameters are used to - Determine the required density is achieved

-

9 pages

Written in 2024/2025

Grade A+

KenAli

Which of the following statements is correct with regard to the welder's qualifications for a minor pressure repair requested by an owner/operator? A: The welder must be qualified for the applicable process by the company making the repair B: A welder who is an employee of the owner/operator need not be formally qualified C: The welder must be qualified by an ASME-Code shop, and be current in the process used for the repair D: The weld may use any qualified procedures that are in accordan...

-

56 pages

Written in 2024/2025

Grade A+

KenAli

An in-service vessel is inspected. If there is a conflict between API 510 and the legal jurisdiction, which should be followed? API 510 The Legal Jurisdiction The one with the most stringent requirements Either set of the requirements based on Engineer and AI approval - C Which of the following vessels, that may be exempted from API 510, should be considered for inclusion in the Owner/User's API 510 program?

-

0 pages

Written in 2024/2025

Grade A+

KenAli

hen repairs and alterations are being conducted, which individual or organization is responsible for quality control? a) Authorized Inspection Agency b) Repair org c) API 510 inspector d) On-site pressure equipment department - b)

-

3 pages

Written in 2024/2025

Grade A+

KenAli

A welding technique where the heat and placement of weld passes in deposited weld layers is controlled so that sufficient heat is provided to temper each previously deposited weld layer is known as: API 577 3.1.65 - Temper Bead Welding. What materials are highly resistant but not immune to Cl SCC? API 571 4.5.1.2 - Nickel base alloys. In brittle fracturing where can the fine shear lips be found? API 571 4.2.7.5 - Along the free edge of the fracture, or localized

-

6 pages

Written in 2024/2025

Grade A+

KenAli

NDE examinations must be scheduled at intervals that consider the Probability of the NDE method to identify the damage What is the transition temperature of a metal? The temp at which the material fracture code changes from ductile to brittle A primary goal of API 510 internal inspection is to Find damage that cannot be found by monitoring external CMLs When conducting a hydrostatic pressure test special attention should be given when testing low alloy steels especially 2 1/4 cr because T...

-

15 pages

Written in 2023/2024

Grade A+

leaketing

Who is responsible to ensure that all of the requirements of API 510 are met? a) AI b) jurisdiction c) manufacturer d) owner/user e) pressure vessel engineer f) pressure equipment department manager d) Who is responsible to ensure that the Authorized Inspection Agency functions in accordance with the requirements of API 510? a) AI b) jurisdiction c) owner/user d) pressure vessel engineer e) pressure equipment department

-

4 pages

Written in 2023/2024

Grade A+

leaketing

Which of the following is considered a vessel alteration? a) addition of non-reinforced nozzle b) weld build-up on a locally corroded area c) replacement of a hemi-spherical head with a tori-spherical head d) addition of fillet weld patch c) An alteration on a vessel is defined as: a) any physical change with design implications b) the work necessary

-

5 pages

Written in 2023/2024

Grade A+

leaketing

Substituting NDE procedures for a pressure test after major repair may be done only after: API 510 5.8.8.1 The engineer and inspector have approved. An example of vessels not covered by API 510 are: API 510 1.1.1 Vessels officially retired from service and abandoned in place

-

9 pages

Written in 2023/2024

Grade A+

leaketing

Scope of API 510 4 in service activities 4 construction code oddities what is the purpose? In-service inspection, repair, alteration and rerating. Pressure vessels and PRD's All in-service hydrocarbon and chemical process vessels. Unless voided by RBI 1.2.2 A) Vessels constructed under a construcion code. ASME BPVC B) vessel constructed without a code C) vessel constucted under special jurisdictional acceptance D) vessel constructed under code but lost is nameplate or stamp. Nonstandar...

-

37 pages

Written in 2023/2024

Grade A+

leaketing

API 510 says that widely scattered pitting can be ignored provided that the: remaining thickness is not less than 1/2 the minimum required thickness. Rupture disks are commonly used to protect a pressure relief valve from corrosive products. When repairs and alterations are being conducted, which individual or organization is responsible Repair Organization Which code provides requirements for Hot Tapping? API 2201

-

22 pages

Written in 2023/2024

Grade A+

leaketing

NDE examinations must be scheduled at intervals that consider the Probability of the NDE method to identify the damage What is the transition temperature of a metal? The temp at which the material fracture code changes from ductile to brittle A primary goal of API 510 internal inspection is to Find damage that cannot be found by monitoring external CMLs When conducting a hydrostatic pressure test special attention should be given when testing low alloy steels especially 2 1/4 cr because T...

-

15 pages

Written in 2023/2024

Grade A+

GOLDENHEART