Basic Electronics (ME223)
Arizona State University - West Campus
Here are the best resources to pass Basic Electronics (ME223). Find Basic Electronics (ME223) study guides, notes, assignments, and much more.
All 7 results
Sort by:
-
Class notes
Voltage Regulator - Zener
-
--17May 20242023/2024Available in bundle
- Zener diode is a voltage regulator device 
because it is able to fix the output voltage at 
a constant value (DC voltage). 
 RS is to limit the zener current, IZ so that it is 
less than the maximum current, IZM (to 
avoid the zener diode from broken).
-
$8.99 More Info
zenniababayon
-
Class notes
Rectifiers
-
--19May 20242023/2024Available in bundle
- A diode is used to pass current in a single direction. Alternating current is a current which flows 
in both directions. In some applications we need dc (direct current) power supply. A method to 
obtain dc supply is by using batteries. But it is not economical at all times. It is possible to obtain 
dc from ac supply .That process is known as rectification. Rectification is of two types: 
 1. Half wave rectification 
 2. Full wave rectification
-
$8.99 More Info
zenniababayon
-
Class notes
DIODE V-I CHARACTERISTIC
-
--14May 20242023/2024Available in bundle
- Definition of Diode 
Current and Voltage 
• Forward Bias 
•When ID > 0mA 
and VD > 0V 
• Reverse Bias 
•When ID < 0mA 
and VD < 0V
-
$8.49 More Info
zenniababayon
-
Class notes
DIODE V-I CHARACTERISTIC
-
--14May 20242023/2024Available in bundle
- Definition of Diode 
Current and Voltage 
• Forward Bias 
•When ID > 0mA 
and VD > 0V 
• Reverse Bias 
•When ID < 0mA 
and VD < 0V
-
$8.49 More Info
zenniababayon
-
Class notes
DIODE V-I CHARACTERISTIC
-
--14May 20242023/2024Available in bundle
- Definition of Diode 
Current and Voltage 
• Forward Bias 
•When ID > 0mA 
and VD > 0V 
• Reverse Bias 
•When ID < 0mA 
and VD < 0V
-
$8.49 More Info
zenniababayon
-
Class notes
Basic Electronics (Voltage Regulators - Zener, Rectifiers, Diode and Diode Equivalent models)
-
---3May 20242023/2024
- An equivalent circuit is nothing but a combination of elements that best represents the actual 
terminal characteristics of the device. In simple language, it simply means the diode in the circuit 
can be replaced by other elements without severely affecting the behavior of circuit. 
The diode can be modeled in three different ways depending on the accuracy required.
-
$10.39 More Info
zenniababayon