Georgia Moving Walk Systems Inspector Exam
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of a moving walk is to:
A. Transport cargo between buildings
B. Assist pedestrians over long horizontal distances
C. Replace escalators in multi-story buildings
D. Provide exercise for building occupants
B. Assist pedestrians over long horizontal distances
Moving walks are designed to move people horizontally or at
slight inclines efficiently over long distances.
2. What is the maximum allowable slope for a moving walk in public
buildings?
A. 6%
B. 12%
C. 15%
D. 20%
B. 12%
Most codes limit moving walk slopes to 12% to ensure safety and
prevent falls.
3. Which component is responsible for moving the steps or belt on a
moving walk?
A. Gearbox
B. Drive motor
, C. Balustrade
D. Handrail
B. Drive motor
The drive motor powers the movement of the belt or steps along
the walkway.
4. What safety device stops a moving walk in case of an emergency?
A. Comb plate
B. Emergency stop button
C. Handrail drive system
D. Step demarcation lights
B. Emergency stop button
Emergency stop buttons are placed at intervals to allow users to
stop the walk in an emergency.
5. Which part prevents entrapment between the handrail and
balustrade?
A. Handrail skirting
B. Comb plate
C. Handrail tensioner
D. Step demarcation
A. Handrail skirting
Handrail skirting prevents hands, clothing, or objects from being
caught between moving parts.
6. What is the standard inspection frequency for moving walks in
commercial buildings?
A. Monthly
B. Quarterly
C. Annually
, D. Daily
C. Annually
Annual inspections are required to ensure ongoing safe operation,
though visual inspections may be more frequent.
7. Which code governs moving walk safety in Georgia?
A. ASME A17.1
B. NFPA 70
C. OSHA 1910
D. IBC 2018
A. ASME A17.1
ASME A17.1 sets the safety standards for elevators, escalators,
and moving walks.
8. The comb plate on a moving walk is located:
A. At the entry and exit points
B. Beneath the handrail
C. Under the drive motor
D. On the side balustrades
A. At the entry and exit points
Comb plates mesh with the moving tread to provide a smooth
transition and prevent entrapment.
9. Which device detects a belt or step obstruction on a moving walk?
A. Handrail speed sensor
B. Step or belt safety switch
C. Balustrade sensor
D. Tension pulley
B. Step or belt safety switch
, Obstruction detection devices automatically stop the walk if
resistance is detected.
10. The minimum width for a passenger moving walk in public
spaces is:
A. 18 inches
B. 24 inches
C. 36 inches
D. 42 inches
C. 36 inches
This width accommodates safe pedestrian traffic and accessibility
requirements.
11. Which part transfers motion from the motor to the moving
walk belt?
A. Comb plate
B. Drive sheave
C. Handrail drive
D. Balustrade
B. Drive sheave
The drive sheave engages the belt and conveys motor power to the
moving walk.
12. Moving walk handrails must move:
A. Faster than the steps
B. At the same speed as the steps
C. Slower than the steps
D. Only when the walk is loaded
B. At the same speed as the steps
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of a moving walk is to:
A. Transport cargo between buildings
B. Assist pedestrians over long horizontal distances
C. Replace escalators in multi-story buildings
D. Provide exercise for building occupants
B. Assist pedestrians over long horizontal distances
Moving walks are designed to move people horizontally or at
slight inclines efficiently over long distances.
2. What is the maximum allowable slope for a moving walk in public
buildings?
A. 6%
B. 12%
C. 15%
D. 20%
B. 12%
Most codes limit moving walk slopes to 12% to ensure safety and
prevent falls.
3. Which component is responsible for moving the steps or belt on a
moving walk?
A. Gearbox
B. Drive motor
, C. Balustrade
D. Handrail
B. Drive motor
The drive motor powers the movement of the belt or steps along
the walkway.
4. What safety device stops a moving walk in case of an emergency?
A. Comb plate
B. Emergency stop button
C. Handrail drive system
D. Step demarcation lights
B. Emergency stop button
Emergency stop buttons are placed at intervals to allow users to
stop the walk in an emergency.
5. Which part prevents entrapment between the handrail and
balustrade?
A. Handrail skirting
B. Comb plate
C. Handrail tensioner
D. Step demarcation
A. Handrail skirting
Handrail skirting prevents hands, clothing, or objects from being
caught between moving parts.
6. What is the standard inspection frequency for moving walks in
commercial buildings?
A. Monthly
B. Quarterly
C. Annually
, D. Daily
C. Annually
Annual inspections are required to ensure ongoing safe operation,
though visual inspections may be more frequent.
7. Which code governs moving walk safety in Georgia?
A. ASME A17.1
B. NFPA 70
C. OSHA 1910
D. IBC 2018
A. ASME A17.1
ASME A17.1 sets the safety standards for elevators, escalators,
and moving walks.
8. The comb plate on a moving walk is located:
A. At the entry and exit points
B. Beneath the handrail
C. Under the drive motor
D. On the side balustrades
A. At the entry and exit points
Comb plates mesh with the moving tread to provide a smooth
transition and prevent entrapment.
9. Which device detects a belt or step obstruction on a moving walk?
A. Handrail speed sensor
B. Step or belt safety switch
C. Balustrade sensor
D. Tension pulley
B. Step or belt safety switch
, Obstruction detection devices automatically stop the walk if
resistance is detected.
10. The minimum width for a passenger moving walk in public
spaces is:
A. 18 inches
B. 24 inches
C. 36 inches
D. 42 inches
C. 36 inches
This width accommodates safe pedestrian traffic and accessibility
requirements.
11. Which part transfers motion from the motor to the moving
walk belt?
A. Comb plate
B. Drive sheave
C. Handrail drive
D. Balustrade
B. Drive sheave
The drive sheave engages the belt and conveys motor power to the
moving walk.
12. Moving walk handrails must move:
A. Faster than the steps
B. At the same speed as the steps
C. Slower than the steps
D. Only when the walk is loaded
B. At the same speed as the steps
