1|Page
NICET SHS Level II Practice Exam (50 Questions) (NEW UPDATED VERSION) LATEST ACTUAL
EXAM QUESTIONS AND CORRECT ANSWERS (VERIFIED QUESTIONS AND ANSWERS) |
GUARANTEED PASS A+ [2026-2027]
Topics Covered:
1. System Components & Functions
2. Detection & Suppression Systems
3. Installation Practices & Codes
4. System Testing & Maintenance
5. Safety & Troubleshooting
1. Which type of special hazard system uses gaseous agents
to suppress fire without damaging sensitive equipment?
A. Water sprinkler system
B. Dry chemical system
C. Clean agent system
D. Foam system
Answer: C
Rationale: Clean agent systems (e.g., FM-200, Novec 1230) suppress fire without leaving
residue and are safe for electronics.
2. What is the primary function of a smoke detector in a
clean agent system?
A. Activate sprinklers
B. Detect fire early to trigger suppression
C. Vent the room
D. Sound an evacuation alarm only
Answer: B
2026 2027 GRADED A+
, 2|Page
3. SATA: Which components are typically part of a gaseous
fire suppression system?
A. Agent storage cylinders
B. Control panel
C. Sprinkler heads
D. Discharge nozzles
E. Manual pull stations
Answers: A, B, D, E
4. What is the minimum clearance required between a clean
agent discharge nozzle and the protected object?
A. 1 inch
B. 6 inches
C. 18 inches
D. 24 inches
Answer: C
Rationale: Proper nozzle clearance ensures effective agent distribution.
5. The term “pre-action system” refers to:
A. A system that discharges immediately upon detecting heat
B. A system requiring two triggers: detection and water valve activation
C. A dry chemical system
D. Foam-only systems
Answer: B
6. Which NFPA standard governs clean agent systems?
A. NFPA 13
B. NFPA 72
2026 2027 GRADED A+
NICET SHS Level II Practice Exam (50 Questions) (NEW UPDATED VERSION) LATEST ACTUAL
EXAM QUESTIONS AND CORRECT ANSWERS (VERIFIED QUESTIONS AND ANSWERS) |
GUARANTEED PASS A+ [2026-2027]
Topics Covered:
1. System Components & Functions
2. Detection & Suppression Systems
3. Installation Practices & Codes
4. System Testing & Maintenance
5. Safety & Troubleshooting
1. Which type of special hazard system uses gaseous agents
to suppress fire without damaging sensitive equipment?
A. Water sprinkler system
B. Dry chemical system
C. Clean agent system
D. Foam system
Answer: C
Rationale: Clean agent systems (e.g., FM-200, Novec 1230) suppress fire without leaving
residue and are safe for electronics.
2. What is the primary function of a smoke detector in a
clean agent system?
A. Activate sprinklers
B. Detect fire early to trigger suppression
C. Vent the room
D. Sound an evacuation alarm only
Answer: B
2026 2027 GRADED A+
, 2|Page
3. SATA: Which components are typically part of a gaseous
fire suppression system?
A. Agent storage cylinders
B. Control panel
C. Sprinkler heads
D. Discharge nozzles
E. Manual pull stations
Answers: A, B, D, E
4. What is the minimum clearance required between a clean
agent discharge nozzle and the protected object?
A. 1 inch
B. 6 inches
C. 18 inches
D. 24 inches
Answer: C
Rationale: Proper nozzle clearance ensures effective agent distribution.
5. The term “pre-action system” refers to:
A. A system that discharges immediately upon detecting heat
B. A system requiring two triggers: detection and water valve activation
C. A dry chemical system
D. Foam-only systems
Answer: B
6. Which NFPA standard governs clean agent systems?
A. NFPA 13
B. NFPA 72
2026 2027 GRADED A+
