NCCER MODULE 5 EXAM
40 + QUESTIONS AND CORRECT
ANSWERS LATEST GUIDE 2025 /
2026 GRADED A + BEST FOR
REVISION .
1/5
, 1. which of these items would not be found in the specifications? ✓✓ correct answer Detail drawings
2. On which construction drawing would you find the location and dimensions of grade beams? ✓✓ correct answer
Foundation plan
3. The drawings used in the construction of building are legally the property of
✓✓ correct answer the architect or building owner
4. An item that requires special framing, such as HVAC ductwork, is shown on the ✓✓ correct answer mechanical,
electrical, and plumbing plans (MEP)
5. What would not be included in a typical sense of prints? ✓✓ correct answer TSOL drawings
6. IN balloon framing, the second floor joist sit on a ✓✓ correct answer 1X4 or 1X6 ribbon let in to the
wall studs
7. Shrinkage in wood framing members occurs mainly ✓✓ correct answer across its width
8. The platform frame used in modern residential and light commercial con- struction is also known as the
✓✓ correct answer western frame
9. The method of construction that experience a relatively large amount of settling as a result of shrinkage is
✓✓ correct answer platform framing
10. The construction method that features widely spaced, heavy framing mem- bers is ✓✓ correct answer post-and-
beam framing
11. In a set of construction drawings, the details about the floor used in a building most likely will be find
in the ✓✓ correct answer structural drawings
12. Large trusses, supported by posts at the building perimeter, are used in
✓✓ correct answer post-frame construction
13. Letter H is pointing to the ✓✓ correct answer sill
2/5
40 + QUESTIONS AND CORRECT
ANSWERS LATEST GUIDE 2025 /
2026 GRADED A + BEST FOR
REVISION .
1/5
, 1. which of these items would not be found in the specifications? ✓✓ correct answer Detail drawings
2. On which construction drawing would you find the location and dimensions of grade beams? ✓✓ correct answer
Foundation plan
3. The drawings used in the construction of building are legally the property of
✓✓ correct answer the architect or building owner
4. An item that requires special framing, such as HVAC ductwork, is shown on the ✓✓ correct answer mechanical,
electrical, and plumbing plans (MEP)
5. What would not be included in a typical sense of prints? ✓✓ correct answer TSOL drawings
6. IN balloon framing, the second floor joist sit on a ✓✓ correct answer 1X4 or 1X6 ribbon let in to the
wall studs
7. Shrinkage in wood framing members occurs mainly ✓✓ correct answer across its width
8. The platform frame used in modern residential and light commercial con- struction is also known as the
✓✓ correct answer western frame
9. The method of construction that experience a relatively large amount of settling as a result of shrinkage is
✓✓ correct answer platform framing
10. The construction method that features widely spaced, heavy framing mem- bers is ✓✓ correct answer post-and-
beam framing
11. In a set of construction drawings, the details about the floor used in a building most likely will be find
in the ✓✓ correct answer structural drawings
12. Large trusses, supported by posts at the building perimeter, are used in
✓✓ correct answer post-frame construction
13. Letter H is pointing to the ✓✓ correct answer sill
2/5
