Neiep semester 100 final review UPDATED
ACTUAL QUESTIONS AND CORRECT
ANSWERS
How to turn Kg to Lbs - CORRECT ANSWERS Multiply by 2.2
How to turn Lbs to Kg - CORRECT ANSWERS Divide by 2.2
Wheat types of detail drawings would you expect to see on a elevator installation job -
CORRECT ANSWERS Standardized, electrical, structural and hoistway drawings
Installing hoistway limit switches what drawing will the mechanic reference - CORRECT
ANSWERS Standardized detail drawing
Where should you place a lifeline when installing them - CORRECT ANSWERS close
enough to permit tying off prior to entering
millimeters to inches - CORRECT ANSWERS divide by 25.4
Inches to millimeters - CORRECT ANSWERS multiply by 25.4
Drawings that are approved by the building owner or representative are labeled with what term -
CORRECT ANSWERS Final
In a standard orthographic projection drawing, where is the placement of a back view if needed -
CORRECT ANSWERS Off to one side of the working drawing
What is the most common drawing method for showing three sides of an object at once in the
elevator industry - CORRECT ANSWERS Isometric Drawing
, How would you describe a class 3 fit for shaft and bore diameters - CORRECT
ANSWERS Snuggest possible allowance
Which class of bolts provides the highest level of precision - CORRECT ANSWERS Class
3 bolts
What is the difference between U.S standard and metric standard threads? - CORRECT
ANSWERS U.S. standard measures threads per inch; metric standard measures by pitch of
the threads
Which tool would be needed to remove an internal snap ring - CORRECT
ANSWERS Internal snap ring pliers
The DBG on the elevator counterweight rails is 33 1/2 what is the metric equivalent of this
dimension - CORRECT ANSWERS 850.9mm
What type of drawing presents a 3 sided view of an object - CORRECT
ANSWERS Orthographic drawing
When erecting a scaffold, what type of fall protection can be used in addition to a personal fall
arrest system - CORRECT ANSWERS Guardrail system built with tubular steel
What scaffold hazards are among the most serious - CORRECT ANSWERS Falls, unsafe
access, scaffold collapse
What mnemonic can be used to help remember the five most serious scaffold hazards -
CORRECT ANSWERS FUSES
You are the only subcontractor on site. While erecting a scaffold, who serves as the safety
officer? - CORRECT ANSWERS The scaffolder
ACTUAL QUESTIONS AND CORRECT
ANSWERS
How to turn Kg to Lbs - CORRECT ANSWERS Multiply by 2.2
How to turn Lbs to Kg - CORRECT ANSWERS Divide by 2.2
Wheat types of detail drawings would you expect to see on a elevator installation job -
CORRECT ANSWERS Standardized, electrical, structural and hoistway drawings
Installing hoistway limit switches what drawing will the mechanic reference - CORRECT
ANSWERS Standardized detail drawing
Where should you place a lifeline when installing them - CORRECT ANSWERS close
enough to permit tying off prior to entering
millimeters to inches - CORRECT ANSWERS divide by 25.4
Inches to millimeters - CORRECT ANSWERS multiply by 25.4
Drawings that are approved by the building owner or representative are labeled with what term -
CORRECT ANSWERS Final
In a standard orthographic projection drawing, where is the placement of a back view if needed -
CORRECT ANSWERS Off to one side of the working drawing
What is the most common drawing method for showing three sides of an object at once in the
elevator industry - CORRECT ANSWERS Isometric Drawing
, How would you describe a class 3 fit for shaft and bore diameters - CORRECT
ANSWERS Snuggest possible allowance
Which class of bolts provides the highest level of precision - CORRECT ANSWERS Class
3 bolts
What is the difference between U.S standard and metric standard threads? - CORRECT
ANSWERS U.S. standard measures threads per inch; metric standard measures by pitch of
the threads
Which tool would be needed to remove an internal snap ring - CORRECT
ANSWERS Internal snap ring pliers
The DBG on the elevator counterweight rails is 33 1/2 what is the metric equivalent of this
dimension - CORRECT ANSWERS 850.9mm
What type of drawing presents a 3 sided view of an object - CORRECT
ANSWERS Orthographic drawing
When erecting a scaffold, what type of fall protection can be used in addition to a personal fall
arrest system - CORRECT ANSWERS Guardrail system built with tubular steel
What scaffold hazards are among the most serious - CORRECT ANSWERS Falls, unsafe
access, scaffold collapse
What mnemonic can be used to help remember the five most serious scaffold hazards -
CORRECT ANSWERS FUSES
You are the only subcontractor on site. While erecting a scaffold, who serves as the safety
officer? - CORRECT ANSWERS The scaffolder
